Splash Wall
TheSplash Wall is asub weapon in theSplatoon series. It is a temporary barrier that blocks enemies from shooting or passing through it while not affecting the thrower or their team.
Appearance
The Splash Wall's main body is a tall, thin pole with an ink tank in the middle. There is a small circular base at the bottom of the pole and a bar sticking out of each side at the top of the pole. InSplatoon, the Splash Wall's main body is red and dark green with a red base and lime green bars. The bars have dark green supports and red tubes. InSplatoon 2, the main body is black with a black base and dark blue bars with black supports. In both games, after the Splash Wall is deployed, ink begins to come out of the bars and the ink tank in the middle begins to drain. The ink in the ink tank and coming out of the bars changes color to match the user'sink.
Splatoon
| Category | Sub | |
| Class | ||
| Sub | ||
| Special | ||
| Special points | ||
| Special depletion | ||
| Range | ||
| Damage | ||
| Impact | ||
| Fire rate | ||
| Charge speed | ||
| Ink speed | ||
| Mobility | ||
| Durability | ||
| Handling | ||
| Level | ||
| Cost | ||
| Requirement | ||
| Added in | Specifications | |
| Weight | ||
| Base damage | 50 per frame | |
| Base duration | 7 seconds | |
| Ink consumption | 60% | |
| Base range | ||
| Rate of fire | ||
| Muzzle velocity | ||
| Base accuracy | ||
| MPU effect | ||
| SPU effect | ||
| SPU effect | ||
| Other variant |
The Splash Wall forms a temporary barrier of fallingink, preventing enemy fire from passing through. Opponents will instantly get splatted if they attempt to walk through the Splash Wall, but the player who spawned it and their teammates will take no damage. These players will also be able to shoot through the wall. The opposing team can shoot the Splash Wall down rather than waiting for it to disappear. If a player tries to throw a splash wall while another splash wall is deployed, the "can't use" message will happen.A similar weapon is also used by theOctarians inOcto Valley.
Use
- The Splash Wall will causeSplat Bombs orSuction Bombs to explode immediately, which can be disastrous if the thrower is too close to the Splash Wall.
- A tactic for the Splash Wall inSplatoon is to place it down right in front of the Tower inTower Control. The Tower goes through the wall but the wall will force the enemies to get off the Tower, allowing the other team to claim it.
- When the Splash Wall is shot by enemy ink, the time remaining until it despawns begins depleting faster. Remaining time can be viewed in an ink-filled tube in the middle of the weapon.
- Splash Walls cannot do any damage to theRainmaker shield. The barrier will instantly destroy the Splash Wall on contact.
Ink management
After deploying a Splash Wall, there is a 2.67-second delay before ink can be refilled again. This refill penalty and the 60% ink consumed by the wall make it necessary to use ink management abilities. To keep up the pressure on opponents by firing for longer periods, a combination of theInk Saver (Main) andInk Saver (Sub) abilities is needed. The charts below show that while Ink Saver (Main) has a greater impact, it is still optimal to use both abilities. The ink refill penalty makesInk Recovery Up less useful, so Ink Saver abilities should be prioritized over Ink Recovery Up.
Version history
| Version | Adjustments |
|---|---|
| 2.0.0 |
|
| 2.1.0 |
|
| 2.2.0 |
|
| 2.7.0 |
|
Quotes
| “ | This defensive wall rains downink, blocking enemy movement and incoming ink. However, you can still shoot through your team's Splash Walls, making them an absolute game changer during duels, particularly in tight chokepoints. The Splash Wall is powered by its own integratedink tank, visible along the center vertical pole. The ink level drops the longer the Splash Wall has been deployed - it takes approximately seven seconds for a Splash Wall to fully consume its ink. As enemy ink strikes the wall, the ink within the tank is depleted at a faster rate. | ” |
—Splatoon Prima Guide | ||
Sets
| Main | #ID | Sub | Special | Special Depletion | Level | Price | Class | Introduced | |
|---|---|---|---|---|---|---|---|---|---|
| .52 Gal | 50 | 5 | Shooter | 28 May 2015 (1.0.0) | |||||
| .96 Gal Deco | 71 | 14 | Shooter | 8 July 2015 | |||||
| Bamboozler 14 Mk I | 2050 | 15 | Charger | 29 August 2015 | |||||
| Bento Splat Charger | 2012 | 20 | Charger | 8 June 2016 (2.8.0) | |||||
| Bento Splatterscope | 2022 | 20 | Charger | 8 June 2016 (2.8.0) | |||||
| Cherry H-3 Nozzlenose | 312 | 20 | Shooter | 8 June 2016 (2.8.0) | |||||
| CoroCoro Splat Roller | 1012 | 20 | Roller | 8 June 2016 (2.8.0) | |||||
| Heavy Splatling | 4010 | 6 | Splatling | 6 August 2015 (2.0.0) | |||||
| Jet Squelcher | 100 | 8 | Shooter | 28 May 2015 (1.0.0) | |||||
| Range Blaster | 220 | 14 | Shooter | 1 August 2015 | |||||
| Slosher Deco | 3001 | 10 | Slosher | 25 November 2015 |
Gallery
High quality art of a Splash Wall.
A Splash Wall being thrown.
A deployed Splash Wall.
AnInkling approaching a Splash Wall.
The Splash Wall in action in Walleye Warehouse.
A Splash Wall deployed inMuseum d'Alfonsino.
A screenshot from beforeSplatoon's release, showing the original name of the Splash Wall.
Concept art of varioussub weapons, with the Splash Wall at the lower right.
An Early Splash Wall.
Splatoon 2
| Category | Sub | |
| Class | ||
| Sub | ||
| Special | ||
| Special points | ||
| Special depletion | ||
| Range | ||
| Damage | ||
| Impact | ||
| Fire rate | ||
| Charge speed | ||
| Ink speed | ||
| Mobility | ||
| Durability | ||
| Handling | ||
| Level | ||
| Cost | ||
| Requirement | ||
| Added in | Specifications | |
| Weight | ||
| Base damage | 30 per half second | |
| Base duration | ~6.67 sec | |
| Ink consumption | 60% | |
| Base range | ||
| Rate of fire | ||
| Muzzle velocity | ||
| Base accuracy | ||
| MPU effect | ||
| SPU effect | ||
| SPU effect | ||
| Other variant |
The Splash Wall returns inSplatoon 2. It functions mostly the same to how it did in the first game, with some changes. It no longer instantly splats enemy players that touch it, instead bumping them away while dealing slight damage. It can still splat but only if the damage dealt is enough to do so. Additionally, it can be thrown while a wall is already active, destroying the previously placed wall in the process.
Obstacle
In theOcto Canyon levelsOctoling Strike,Octolings Ahoy!, andOctoling Workout, Splash Walls appear as a stationary obstacle. In these levels, the Splash Walls activate only whenAgent 4 approaches them, and unlike the sub-weapon version, these Splash Walls do not dissipate over time and must be destroyed with ink.
In theOcto Expansion, Splash Walls appear as stationary obstacles at multiple stations. InFar-Out Station andRad Ride Station, these Splash Walls behave like the ones in Octo Canyon, deploying whenAgent 8 approaches them. InToastmaster Station, Splash Walls are automatically deployed in the third phase of theOcto Oven XXL battle, protecting the boss's tentacle on all sides. InHasta La Vista Station, a Splash Wall automatically deploys in front of theOctocommander in the third wave of enemies.
Version history
| Version | Adjustments |
|---|---|
| Base game |
|
| 1.3.0 |
|
| 1.4.0 |
|
| 3.0.0 |
|
| 4.1.0 |
|
| 4.8.0 |
|
Quotes
| “ | This weapon creates a wall ofink in front of you, blocking enemies from attacking or approaching. Enemy attacks will make it break down more quickly. You can only place one at a time. | ” |
Sets
Gallery
A promo image of the Splash Wall.
A Splash Wall deployed onHumpback Pump Track.
A Splash wall deployed onCamp Triggerfish.
Splatoon 3
| Category | Sub | |
| Class | ||
| Sub | ||
| Special | ||
| Special points | ||
| Special depletion | ||
| Range | ||
| Damage | ||
| Impact | ||
| Fire rate | ||
| Charge speed | ||
| Ink speed | ||
| Mobility | ||
| Durability | ||
| Handling | ||
| Level | ||
| Cost | ||
| Requirement | ||
| Added in | Specifications | |
| Weight | ||
| Base damage | 30 per half second | |
| Base duration | ~6.67 sec | |
| Ink consumption | 60% | |
| Base range | ||
| Rate of fire | ||
| Muzzle velocity | ||
| Base accuracy | ||
| MPU effect | ||
| SPU effect | ||
| SPU effect | ||
| Other variant |
The Splash Wall returns inSplatoon 3, looking identical and functioning near-identically as inSplatoon 2. Notably, the Splash Wall destroys opposing deployable specials (such as theTacticooler) thrown into it and delays the slide of opposingReefsliders, though it does not stop them completely.
Side Order
Splash Wall appears inSide Order as the base sub weapon ofDJ Octavio'sPalette. They also appear as a purchasable sub weapon onVending-Machine CornerFloors, costing 500Membux by default.
Version history
| Version | Adjustments |
|---|---|
| 1.2.0 |
|
Quotes
| “ | A device that erects a wall ofink in front of you that blocks enemy intrusion and attacks. Attacks from enemies will speed up the time it takes for the wall to come down. You can only place one at a time. | ” | — In-game description | ||
Sets
Gallery
Promotional screenshot
3DTableturf Battle artwork
2D icon
2D icon used inSide Order
Strategy
For competitive tips about the Splash Wall
| View the strategy page. |
Trivia
- The Splash Wall has 800 HP upon setup.
- The Splash Wall was originally called "Ink Shield", as seen in an image from beforeSplatoon's release.
- The Splash Wall has the most damage per second of any weapon in the game, at 50 per tick.
- Splash Walls are used in many out of boundsglitches. If an opponent places a Splash Wall next to a wall, then the player stands between the wall and the Splash Wall and activates aBaller, the player will clip into the wall.
Names in other languages
| Language | Name | Meaning |
|---|---|---|
| スプラッシュシールド supurasshu shīrudo | Splash Shield | |
| Inktgordijn(Splatoon 2 & 3) | Ink curtain | |
| Spettermuur(Splatoon[1]) | Splatter wall | |
| Mur d'encre | Ink wall | |
| Tintenwall | Ink wall | |
| Muro di colore | Color wall | |
| Чернильный занавес(Splatoon 2 & 3) Chernil'nyy zanaves | Ink curtain | |
| Жидкая стена(Splatoon[2]) Zhidkaya stena | Liquid wall | |
| Barricada | Barricade | |
| Telón de Tinta | Ink Curtain | |
| 斯普拉防护墙 sīpǔlā fánghù qiáng (Mandarin) | Spla Protective Wall | |
| 斯普拉防護牆 sīpǔlā fánghù qiáng (Mandarin) | Spla Protective Wall | |
| 스플래시 실드 seupeullaesi sildeu | Same as Japanese name | |
| Parede de tinta[3] | Paint wall | |
| Shield[4] |







