Kensa Rapid Blaster
TheKensa Rapid Blaster is amain weapon inSplatoon 2. It is aToni Kensa-branded variant of theRapid Blaster.
Appearance
The Kensa Rapid Blaster is similar in appearance to theRapid Blaster. However, it is almost completely black with a few white parts as opposed to mainly red and gray. TheToni Kensa signature red clothespin is pinned in between the two bottom parts.
Splatoon 2
| Basic information | |
|---|---|
| Category | Main |
| Class | Shooter |
| Sub | |
| Special | |
| Special points | 200p |
| Special depletion | |
| Range | 62 / 100 |
| Damage | |
| Impact | 35 / 100 |
| Fire rate | 40 / 100 |
| Charge speed | |
| Ink speed | |
| Mobility | |
| Durability | |
| Handling | |
| Obtainable at | |
| Level | 21 |
| Cost | |
| Requirement | |
| Added in | 3 October 2018 |
| Specifications | |
| Weight | |
| Base damage | 17.5 (Splash) 35 (Blast) 85 (Direct hit) |
| Base duration | |
| Ink consumption | 7% |
| Base range | |
| Rate of fire | |
| Muzzle velocity | |
| Base accuracy | |
| MPU effect | |
| SPU effect | |
| SPU effect | |
| Other variants | |
The Kensa Rapid Blaster was announced on4 December 2018. It was added to the game on5 December 2018 as part of the version4.3.0 release[1], equipped withTorpedoes andBaller.
Data
- The Kensa Rapid Blaster is amiddleweight weapon.
- The matchmaking range is 167. The game's matchmaking system looks at a team's average matchmaking range value, and matches them against a team with a similar average.
- The ink consumption of 7% and ink tank capacity of 100% allows players to fire 14 shots before needing to refill the ink supply.
- This stat can be changed withInk Saver (Main).
- When initially firing the weapon in humanoid form, the first shot takes 12 frames to come out.
- When firing from swim form, the first shot takes 21 frames to come out.
- The interval between firing and when the player is able to enter swim form or use a sub weapon is 20 frames.
- When firing continuously, it shoots a bullet every 35 frames (1.71 shots per second).
- When firing while moving, the player's movement speed is set to 0.55 units per frame.
- After firing, there is a 50 frame cooldown before the ink tank starts refilling.
- Each shot has a base damage of 85.
- The bullet hitbox has a radius of 2 units.
- Shots cannot ever deviate from the inner reticle while on the ground.
- The angle its shots can deviate while in the air is 8 degrees.
- The outer reticle immediately expands after jumping. After 40 frames, the outer reticle will start shrinking, and will finish shrinking after 70 frames.
- When jumping, the chance to shoot towards the outer reticle instead of the inner reticle is immediately set to 50%.
- Shots initially travel straight at a rate of 12 units per frame for 11 frames. Shots travel straight for 132 distance units.
- After that, the shot's velocity is set to 11.3305 units per frame if it is not already lower than the listed value, and decreases further as it travels.
- Ink droplets occur every 16.2 units.
- The frequency at which ink drips from a shot occurs at a rate of 11 droplets per shot.
- There are a total of 1 different droplet patterns that can be created while firing this weapon.
- Ink droplets have a radius of 11 units.
- Droplets have their radius multiplied by a value ranging from 1 if they fell from a height above 100 units to 1.2 if they fell from a height below 30 units.
- The shot explodes 15 frames after being fired.
- The far damage radius of the explosion is 33 units.
- Main Power Up increases the far damage radius up to 35 units.
- When the shot explodes on the ground or wall, the far damage radius is 16.5 units.
- The near damage radius of the explosion is 9.4 units.
- Main Power Up increases the near damage radius up to 10 units.
- Damage from the explosion is 35. Damage does not change based on distance from the center of the explosion.
- When the shot explodes on the ground or wall, the damage is 17.5.
- When the shot explodes in the air, it creates a splash of paint with a radius of 28 units.
- The radius of wall dripping paint is 10 units.
- The wall impact painting radius is 19 units.
Version history
| Version | Adjustments |
|---|---|
| 4.5.0 |
|
| 4.9.0 |
|
Quotes
| Sheldon's Introduction TheKensa Rapid Blaster is a limited-edition blaster created in collaboration with Toni Kensa! |
Gallery
Promotional render.
Demonstration
Strategy
For competitive tips about the Kensa Rapid Blaster
| View the strategy page. |
Names in other languages
| Language | Name | Meaning |
|---|---|---|
| ラピッドブラスターベッチュー Rapiddo Burastā Betchū | Rapid Blaster Bespoke | |
| Toni Kensa Flitsblaster | Toni Kensa Flash blaster | |
| Turboblasteur Thony K | Toni Kensa Turbo Blaster | |
| Turboblaster K | Turbo Blaster K | |
| Kensa-Turbo-Blaster | Kensa Turbo Blaster | |
| Blaster rapido Nero Marlin | Rapid blaster Toni Kensa (Toni Kensa =Nero Marlin brand in Italian) | |
| Бластермат от С.Кусаки Blastermat ot S.Kusaki | Blastermat by T.Kensa | |
| Turbolanzamotas Tonken | Tonken Turbo Speck Thrower | |
| Devastador exprés elegante | Elegant express devastator |




