I have the following problem:I want to host a webserver on my Pi Zero W and access it over Bluetooth. To achieve this i tried to use PAN as underlying layer.The first time i followed this post.Most ...

Device: Raspberry Pi Zero W v1.1State: Pi Zero is running in gadget mode, acting as a USB Mass Storage device (seen by / mounted on a MacBook Pro).Question: What is the best way to detect whether ...

I have a 0.23 inch microdisplay (https://www.amazon.ca/Microdisplays-Resolution-Brightness-Interface-Application/dp/B0CDXXWSRV) that doesn't seem to connect directly to my Raspberry Pi Pico 2W, Zero 2,...

I have a Rpi Zero W with headless setup and I am trying to connect my bluetooth speaker into my Raspberry Pi W.I followed this Setup Bluetooth on Raspberry PiI followed these steps to be exact1. ...

I am trying to get an additional USB port working by using the MAX3421 chip over SPI on a Raspberry Pi Zero W running raspbian.I have successfully installed the driver as a kernel module. The chip ...

This is my first post on this forum.Thanks for being welcomed into this community.I am struggling with my second project with a RaspberryPi.On Github I found a very interesting project of an ...

I'm testing various clock sources on a Raspberrypi Zero W with Raspbian Buster Lite. After removing the fake hardware clocksudo apt remove --purge fake-hwclockand disabling ntpsudo timedatectl ...

I've been trying to set up a raspberry pi zero as a keyboard gadget, hoping i could wake a laptop (No ethernet) with it. I would also be able to encrypt it and send the password, which is an added ...

So I have looked online and I even got different mics and adapters to get this working, but it still doesn't work. I was able to successfully setup my Alexa Pi on the RPi Zero W, because when I boot ...

Problem with unbound and pi-holeI followed the official guide for installing Unbound alongside Pi-hole for my network, see Setting up Pi-hole as a recursive DNS server solutionA week ago I first ...

I am unable to access my RPI Zero W v1.1 with SSH through USB.I'm using a fresh install of the RPI OS Lite 32 bit version through the official Imager (1.7.4), with a custom username/password, custom ...

On my RPi Zero W I had a kernel panic issueKernel panic-not syncing: VFS: unable to mount root fs on unknown-block(179,6)but I managed to fix it with the help from the second aswer from this post:...

I'd like to wire this bay to the GPIOs of a rpi zero w.The bay welcomes 2S 2x18,650.On each cell is written "9800mAh TR 18650 3.7v Li-ion".My requirements are :One micro-USB port must ...

I would like to install a module on my R PI Zero W with soldered head.The avaliable interface options for the module areTTL | RS232 | USB | USB VirtualURL to module: https://www.aliexpress.com/item/...

I've done some googling on the topic of the zero and WPS but most of them talk about running some commands on the zero to get it to connect WPS.The problem I am trying to solve is.... I can't run ...