As a part of my research I need to have two Raspberry Pis and a Pixhawk all within the body of a UAV. I know I can get one Pi connected to the Pixhawk over mavlink, but how can I get the two Pis ...

I was trying to use apt-get update and it didn't work because the pi wouldn't connect via ethernet (even though it is plugged in). I tried pinging google but it says network is unreachable. I checked ...

I purchased Waveshare's Pico-ETH-CH9121 and followed the instructions at https://www.waveshare.com/wiki/Pico-ETH-CH9121. Unfortunately, I do not understand what to do to establish a TCP/IP connection, ...

This is a pretty short question.My ethernet port works, but none of the usb ports seem to do anything when I plug anything in them. This is the case with a fresh raspi os image.How can I debug this?

I have to establish multiple RPI(Let's say 2-3) to 1 PC communication. I have to set up a CAN bus in either the PC or RPI. I am considering using an Ethernet cable and setting up a python server on ...

I'm trying to route audio coming from a tv to my Sonos speaker using a USB audio capture card (tv aux to Raspberry Pi USB input). I'm planning on using the ethernet port on the Raspi to output the ...

Good Evening, Ideas- I'm operating at work so I'm very limited to my "lab" to play around with stuff. Anyway- here's what I've got-Ubiquiti EdgeRouter 8Raspberry Pi 4Windows 10 Machine (with VNC, ...

I want to connect my Raspberry Pi to the university network. I was successful to connect it to eduroam (WLAN). Some times I would also like to access the universities network over LAN. For doing so, I ...

I would like my raspberry to work as a gateway for LAN devices and connect to Internet.Now the default gateway is my router connected to ISP provider.Basically I would therefore like to share the ...

Recently I read (in articles such as this one) that it is possible to use the Raspberry Pi Zero in 'USB/Ethernet gadget mode'.Now my modem has two USB ports, which the manual says can be used for ...

I am looking into SD cardless network boot options for a bunch of RPis. I would like them to all boot from one server, which should provide either of two images to the raspberry, as well as an ...

I'm trying to use SSH over Bluetooth via Ethernet over Blutooth. I've based my effort thus far on: Bluetooth PAN Network Setup with BlueZ 5.XI believe I have faithfully followed the instructions. ...

I followed this guide to turn my Raspberry Pi Zeroes into ethernet gadgets and I did not change anything in the /etc/network/interfaces or /etc/dhcpcd.conf files. All of the SD cards were fresh ...

My company has given me a project where I need to provide internet access to a PC via a USB cable connected to the RPi (Model B), which in turn is connected to the router via Ethernet. I have in my ...

I have a laptop connected to wifi. I would like to connect my Raspberry Pi to it with an ethernet cable and have access to internet thanks to the laptop connection.I have found a lot of partial ...