High-density linkage map construction and QTL analyses for fiber quality, yield and morphological traits using CottonSNP63K array in upland cotton (Gossypium hirsutum L.)
- PMID:31771502
- PMCID: PMC6878679
- DOI: 10.1186/s12864-019-6214-z
High-density linkage map construction and QTL analyses for fiber quality, yield and morphological traits using CottonSNP63K array in upland cotton (Gossypium hirsutum L.)
Abstract
Background: Improving fiber quality and yield are the primary research objectives in cotton breeding for enhancing the economic viability and sustainability of Upland cotton production. Identifying the quantitative trait loci (QTL) for fiber quality and yield traits using the high-density SNP-based genetic maps allows for bridging genomics with cotton breeding through marker assisted and genomic selection. In this study, a recombinant inbred line (RIL) population, derived from cross between two parental accessions, which represent broad allele diversity in Upland cotton, was used to construct high-density SNP-based linkage maps and to map the QTLs controlling important cotton traits.
Results: Molecular genetic mapping using RIL population produced a genetic map of 3129 SNPs, mapped at a density of 1.41 cM. Genetic maps of the individual chromosomes showed good collinearity with the sequence based physical map. A total of 106 QTLs were identified which included 59 QTLs for six fiber quality traits, 38 QTLs for four yield traits and 9 QTLs for two morphological traits. Sub-genome wide, 57 QTLs were mapped in A sub-genome and 49 were mapped in D sub-genome. More than 75% of the QTLs with favorable alleles were contributed by the parental accession NC05AZ06. Forty-six mapped QTLs each explained more than 10% of the phenotypic variation. Further, we identified 21 QTL clusters where 12 QTL clusters were mapped in the A sub-genome and 9 were mapped in the D sub-genome. Candidate gene analyses of the 11 stable QTL harboring genomic regions identified 19 putative genes which had functional role in cotton fiber development.
Conclusion: We constructed a high-density genetic map of SNPs in Upland cotton. Collinearity between genetic and physical maps indicated no major structural changes in the genetic mapping populations. Most traits showed high broad-sense heritability. One hundred and six QTLs were identified for the fiber quality, yield and morphological traits. Majority of the QTLs with favorable alleles were contributed by improved parental accession. More than 70% of the mapped QTLs shared the similar map position with previously reported QTLs which suggest the genetic relatedness of Upland cotton germplasm. Identification of QTL clusters could explain the correlation among some fiber quality traits in cotton. Stable and major QTLs and QTL clusters of traits identified in the current study could be the targets for map-based cloning and marker assisted selection (MAS) in cotton breeding. The genomic region on D12 containing the major stable QTLs for micronaire, fiber strength and lint percentage could be potential targets for MAS and gene cloning of fiber quality traits in cotton.
Keywords: Array; Breeding; Fiber quality and yield; Linkage map; Mapping; QTL clusters; Quantitative trait locus (QTL); Recombinant inbred lines (RILs); Single nucleotide polymorphism (SNP); Upland cotton.
Conflict of interest statement
The authors declare that they have no competing interests.
Figures








Similar articles
- Enhancing Upland cotton for drought resilience, productivity, and fiber quality: comparative evaluation and genetic dissection.Ulloa M, De Santiago LM, Hulse-Kemp AM, Stelly DM, Burke JJ.Ulloa M, et al.Mol Genet Genomics. 2020 Jan;295(1):155-176. doi: 10.1007/s00438-019-01611-6. Epub 2019 Oct 16.Mol Genet Genomics. 2020.PMID:31620883
- Identification of stable quantitative trait loci (QTLs) for fiber quality traits across multiple environments in Gossypium hirsutum recombinant inbred line population.Jamshed M, Jia F, Gong J, Palanga KK, Shi Y, Li J, Shang H, Liu A, Chen T, Zhang Z, Cai J, Ge Q, Liu Z, Lu Q, Deng X, Tan Y, Or Rashid H, Sarfraz Z, Hassan M, Gong W, Yuan Y.Jamshed M, et al.BMC Genomics. 2016 Mar 8;17:197. doi: 10.1186/s12864-016-2560-2.BMC Genomics. 2016.PMID:26951621Free PMC article.
- A high-density genetic map of extra-long staple cotton (Gossypium barbadense) constructed using genotyping-by-sequencing based single nucleotide polymorphic markers and identification of fiber traits-related QTL in a recombinant inbred line population.Fan L, Wang L, Wang X, Zhang H, Zhu Y, Guo J, Gao W, Geng H, Chen Q, Qu Y.Fan L, et al.BMC Genomics. 2018 Jun 25;19(1):489. doi: 10.1186/s12864-018-4890-8.BMC Genomics. 2018.PMID:29940861Free PMC article.
- Fiber Quality Improvement in Upland Cotton (Gossypium hirsutum L.): Quantitative Trait Loci Mapping and Marker Assisted Selection Application.Ijaz B, Zhao N, Kong J, Hua J.Ijaz B, et al.Front Plant Sci. 2019 Dec 11;10:1585. doi: 10.3389/fpls.2019.01585. eCollection 2019.Front Plant Sci. 2019.PMID:31921240Free PMC article.Review.
- Genome-wide association study reveals novel quantitative trait loci and candidate genes of lint percentage in upland cotton based on the CottonSNP80K array.Chen Y, Gao Y, Chen P, Zhou J, Zhang C, Song Z, Huo X, Du Z, Gong J, Zhao C, Wang S, Zhang J, Wang F, Zhang J.Chen Y, et al.Theor Appl Genet. 2022 Jul;135(7):2279-2295. doi: 10.1007/s00122-022-04111-1. Epub 2022 May 16.Theor Appl Genet. 2022.PMID:35570221Review.
Cited by
- Inheritance, QTLs, and Candidate Genes of Lint Percentage in Upland Cotton.Niu H, Ge Q, Shang H, Yuan Y.Niu H, et al.Front Genet. 2022 Mar 31;13:855574. doi: 10.3389/fgene.2022.855574. eCollection 2022.Front Genet. 2022.PMID:35450216Free PMC article.Review.
- Aspartyl proteases identified as candidate genes of a fiber length QTL, qFLD05, that regulates fiber length in cotton (Gossypium hirsutum L.).Zhang S, Wang H, Li X, Tang L, Cai X, Liu C, Zhang X, Zhang J.Zhang S, et al.Theor Appl Genet. 2024 Feb 26;137(3):59. doi: 10.1007/s00122-024-04559-3.Theor Appl Genet. 2024.PMID:38407588
- Detection of Stable Elite Haplotypes and Potential Candidate Genes of Boll Weight Across Multiple Environments via GWAS in Upland Cotton.Feng Z, Li L, Tang M, Liu Q, Ji Z, Sun D, Liu G, Zhao S, Huang C, Zhang Y, Zhang G, Yu S.Feng Z, et al.Front Plant Sci. 2022 Jun 13;13:929168. doi: 10.3389/fpls.2022.929168. eCollection 2022.Front Plant Sci. 2022.PMID:35769298Free PMC article.
- Finding Needles in a Haystack: Using Geo-References to Enhance the Selection and Utilization of Landraces in Breeding for Climate-Resilient Cultivars of Upland Cotton (Gossypium hirsutum L.).Shim J, Bandillo NB, Angeles-Shim RB.Shim J, et al.Plants (Basel). 2021 Jun 26;10(7):1300. doi: 10.3390/plants10071300.Plants (Basel). 2021.PMID:34206949Free PMC article.Review.
- Analysis of transcriptome data and quantitative trait loci enables the identification of candidate genes responsible for fiber strength in Gossypium barbadense.Duan Y, Chen Q, Chen Q, Zheng K, Cai Y, Long Y, Zhao J, Guo Y, Sun F, Qu Y.Duan Y, et al.G3 (Bethesda). 2022 Aug 25;12(9):jkac167. doi: 10.1093/g3journal/jkac167.G3 (Bethesda). 2022.PMID:35881688Free PMC article.
References
- Fryxell PA. A revised taxonomic interpretation of Gossypium L. (Malvaceae). Rheedea 2. 1992. pp. 108–165.
- Grover CE, Zhu X, Grupp KK, Jareczek JJ, Gallagher JP, et al. Molecular confirmation of species status for the allopolyploid cotton species, Gossypium ekmanianum Wittmack. Genet Resour Crop Evol. 2014;62:103–114. doi: 10.1007/s10722-014-0138-x. - DOI
- Shim J, Mangat PK, Angeles-Shim RB. Natural variation in wild Gossypium species as a tool to broaden the genetic base of cultivated cotton. J Plant Sci Curr. 2018;Res 2:005.
- U.S. Department of Agriculture . Cotton: World Markets and Trade. USDA Foreign Agricultural Service. 2018.
- National Cotton Council of America . Overview of the U.S. cotton industry. 2011.
MeSH terms
Related information
LinkOut - more resources
Full Text Sources
Other Literature Sources