Movatterモバイル変換

9.26.1. Configuration Settings Functions

9.26.2. Server Signaling Functions

9.26.3. Backup Control Functions

9.26.4. Recovery Control Functions

9.26.5. Snapshot Synchronization Functions

9.26.6. Replication Functions

9.26.7. Database Object Management Functions

9.26.8. Index Maintenance Functions

9.26.9. Generic File Access Functions

9.26.10. Advisory Lock Functions

Table 9.76 shows the functions available to query and alter run-time configuration parameters.

The functioncurrent_setting yields the current value of the settingsetting_name. It corresponds to theSQL commandSHOW. An example:

SELECT current_setting('datestyle'); current_setting----------------- ISO, MDY(1 row)

If there is no setting namedsetting_name,current_setting throws an error unlessmissing_ok is supplied and istrue.

set_config sets the parametersetting_name tonew_value. Ifis_local istrue, the new value will only apply to the current transaction. If you want the new value to apply for the current session, usefalse instead. The function corresponds to the SQL commandSET. An example:

SELECT set_config('log_statement_stats', 'off', false); set_config------------ off(1 row)

The functions shown inTable 9.77 send control signals to other server processes. Use of these functions is restricted to superusers by default but access may be granted to others with theGRANT, with noted exceptions.

Each of these functions returnstrue if successful andfalse otherwise.

pg_cancel_backend andpg_terminate_backend send signals (SIGINT orSIGTERM respectively) to backend processes identified by process ID. The process ID of an active backend can be found from thepid column of thepg_stat_activity view, or by listing thepostgres processes on the server (usingps on Unix or theTask Manager onWindows). The role of an active backend can be found from theusename column of thepg_stat_activity view.

pg_reload_conf sends aSIGHUP signal to the server, causing configuration files to be reloaded by all server processes.

pg_rotate_logfile signals the log-file manager to switch to a new output file immediately. This works only when the built-in log collector is running, since otherwise there is no log-file manager subprocess.

The functions shown inTable 9.78 assist in making on-line backups. These functions cannot be executed during recovery (except non-exclusivepg_start_backup, non-exclusivepg_stop_backup,pg_is_in_backup,pg_backup_start_time andpg_xlog_location_diff).

pg_start_backup accepts an arbitrary user-defined label for the backup. (Typically this would be the name under which the backup dump file will be stored.) When used in exclusive mode, the function writes a backup label file (backup_label) and, if there are any links in thepg_tblspc/ directory, a tablespace map file (tablespace_map) into the database cluster's data directory, performs a checkpoint, and then returns the backup's starting transaction log location as text. The user can ignore this result value, but it is provided in case it is useful. When used in non-exclusive mode, the contents of these files are instead returned by thepg_stop_backup function, and should be written to the backup by the caller.

postgres=# select pg_start_backup('label_goes_here'); pg_start_backup----------------- 0/D4445B8(1 row)

There is an optional second parameter of typeboolean. Iftrue, it specifies executingpg_start_backup as quickly as possible. This forces an immediate checkpoint which will cause a spike in I/O operations, slowing any concurrently executing queries.

In an exclusive backup,pg_stop_backup removes the label file and, if it exists, thetablespace_map file created bypg_start_backup. In a non-exclusive backup, the contents of thebackup_label andtablespace_map are returned in the result of the function, and should be written to files in the backup (and not in the data directory). When executed on a primarypg_stop_backup will wait for WAL to be archived, provided that archiving is enabled.

On a standbypg_stop_backup will return immediately without waiting, so it's important to verify that all required WAL segments have been archived. If write activity on the primary is low, it may be useful to runpg_switch_xlog on the primary in order to trigger a segment switch.

When executed on a primary, the function also creates a backup history file in the write-ahead log archive area. The history file includes the label given topg_start_backup, the starting and ending transaction log locations for the backup, and the starting and ending times of the backup. The return value is the backup's ending transaction log location (which again can be ignored). After recording the ending location, the current transaction log insertion point is automatically advanced to the next transaction log file, so that the ending transaction log file can be archived immediately to complete the backup.

pg_switch_xlog moves to the next transaction log file, allowing the current file to be archived (assuming you are using continuous archiving). The return value is the ending transaction log location + 1 within the just-completed transaction log file. If there has been no transaction log activity since the last transaction log switch,pg_switch_xlog does nothing and returns the start location of the transaction log file currently in use.

pg_create_restore_point creates a named transaction log record that can be used as recovery target, and returns the corresponding transaction log location. The given name can then be used withrecovery_target_name to specify the point up to which recovery will proceed. Avoid creating multiple restore points with the same name, since recovery will stop at the first one whose name matches the recovery target.

pg_current_xlog_location displays the current transaction log write location in the same format used by the above functions. Similarly,pg_current_xlog_insert_location displays the current transaction log insertion point andpg_current_xlog_flush_location displays the current transaction log flush point. The insertion point is the“logical” end of the transaction log at any instant, while the write location is the end of what has actually been written out from the server's internal buffers and flush location is the location guaranteed to be written to durable storage. The write location is the end of what can be examined from outside the server, and is usually what you want if you are interested in archiving partially-complete transaction log files. The insertion and flush points are made available primarily for server debugging purposes. These are both read-only operations and do not require superuser permissions.

You can usepg_xlogfile_name_offset to extract the corresponding transaction log file name and byte offset from the results of any of the above functions. For example:

postgres=# SELECT * FROM pg_xlogfile_name_offset(pg_stop_backup());        file_name         | file_offset --------------------------+------------- 00000001000000000000000D |     4039624(1 row)

Similarly,pg_xlogfile_name extracts just the transaction log file name. When the given transaction log location is exactly at a transaction log file boundary, both these functions return the name of the preceding transaction log file. This is usually the desired behavior for managing transaction log archiving behavior, since the preceding file is the last one that currently needs to be archived.

pg_xlog_location_diff calculates the difference in bytes between two transaction log locations. It can be used withpg_stat_replication or some functions shown inTable 9.78 to get the replication lag.

For details about proper usage of these functions, seeSection 25.3.

The functions shown inTable 9.79 provide information about the current status of the standby. These functions may be executed both during recovery and in normal running.

The functions shown inTable 9.80 control the progress of recovery. These functions may be executed only during recovery.

While recovery is paused no further database changes are applied. If in hot standby, all new queries will see the same consistent snapshot of the database, and no further query conflicts will be generated until recovery is resumed.

If streaming replication is disabled, the paused state may continue indefinitely without problem. While streaming replication is in progress WAL records will continue to be received, which will eventually fill available disk space, depending upon the duration of the pause, the rate of WAL generation and available disk space.

PostgreSQL allows database sessions to synchronize their snapshots. Asnapshot determines which data is visible to the transaction that is using the snapshot. Synchronized snapshots are necessary when two or more sessions need to see identical content in the database. If two sessions just start their transactions independently, there is always a possibility that some third transaction commits between the executions of the twoSTART TRANSACTION commands, so that one session sees the effects of that transaction and the other does not.

To solve this problem,PostgreSQL allows a transaction toexport the snapshot it is using. As long as the exporting transaction remains open, other transactions canimport its snapshot, and thereby be guaranteed that they see exactly the same view of the database that the first transaction sees. But note that any database changes made by any one of these transactions remain invisible to the other transactions, as is usual for changes made by uncommitted transactions. So the transactions are synchronized with respect to pre-existing data, but act normally for changes they make themselves.

Snapshots are exported with thepg_export_snapshot function, shown inTable 9.81, and imported with theSET TRANSACTION command.

The functionpg_export_snapshot saves the current snapshot and returns atext string identifying the snapshot. This string must be passed (outside the database) to clients that want to import the snapshot. The snapshot is available for import only until the end of the transaction that exported it. A transaction can export more than one snapshot, if needed. Note that doing so is only useful inREAD COMMITTED transactions, since inREPEATABLE READ and higher isolation levels, transactions use the same snapshot throughout their lifetime. Once a transaction has exported any snapshots, it cannot be prepared withPREPARE TRANSACTION.

SeeSET TRANSACTION for details of how to use an exported snapshot.

The functions shown inTable 9.82 are for controlling and interacting with replication features. SeeSection 26.2.5,Section 26.2.6, andChapter 48 for information about the underlying features. Use of functions for replication origin is restricted to superusers. Use of functions for replication slot is restricted to superusers and users havingREPLICATION privilege.

Many of these functions have equivalent commands in the replication protocol; seeSection 51.3.

The functions described inSection 9.26.3,Section 9.26.4, andSection 9.26.5 are also relevant for replication.

The functions shown inTable 9.83 calculate the disk space usage of database objects.

pg_column_size shows the space used to store any individual data value.

pg_total_relation_size accepts the OID or name of a table or toast table, and returns the total on-disk space used for that table, including all associated indexes. This function is equivalent topg_table_size+pg_indexes_size.

pg_table_size accepts the OID or name of a table and returns the disk space needed for that table, exclusive of indexes. (TOAST space, free space map, and visibility map are included.)

pg_indexes_size accepts the OID or name of a table and returns the total disk space used by all the indexes attached to that table.

pg_database_size andpg_tablespace_size accept the OID or name of a database or tablespace, and return the total disk space used therein. To usepg_database_size, you must haveCONNECT permission on the specified database (which is granted by default). To usepg_tablespace_size, you must haveCREATE permission on the specified tablespace, unless it is the default tablespace for the current database.

pg_relation_size accepts the OID or name of a table, index or toast table, and returns the on-disk size in bytes of one fork of that relation. (Note that for most purposes it is more convenient to use the higher-level functionspg_total_relation_size orpg_table_size, which sum the sizes of all forks.) With one argument, it returns the size of the main data fork of the relation. The second argument can be provided to specify which fork to examine:

pg_size_pretty can be used to format the result of one of the other functions in a human-readable way, using bytes, kB, MB, GB or TB as appropriate.

pg_size_bytes can be used to get the size in bytes from a string in human-readable format. The input may have units of bytes, kB, MB, GB or TB, and is parsed case-insensitively. If no units are specified, bytes are assumed.

The functions above that operate on tables or indexes accept aregclass argument, which is simply the OID of the table or index in thepg_class system catalog. You do not have to look up the OID by hand, however, since theregclass data type's input converter will do the work for you. Just write the table name enclosed in single quotes so that it looks like a literal constant. For compatibility with the handling of ordinarySQL names, the string will be converted to lower case unless it contains double quotes around the table name.

If an OID that does not represent an existing object is passed as argument to one of the above functions, NULL is returned.

The functions shown inTable 9.84 assist in identifying the specific disk files associated with database objects.

pg_relation_filenode accepts the OID or name of a table, index, sequence, or toast table, and returns the“filenode” number currently assigned to it. The filenode is the base component of the file name(s) used for the relation (seeSection 65.1 for more information). For most tables the result is the same aspg_class.relfilenode, but for certain system catalogsrelfilenode is zero and this function must be used to get the correct value. The function returns NULL if passed a relation that does not have storage, such as a view.

pg_relation_filepath is similar topg_relation_filenode, but it returns the entire file path name (relative to the database cluster's data directoryPGDATA) of the relation.

pg_filenode_relation is the reverse ofpg_relation_filenode. Given a“tablespace” OID and a“filenode”, it returns the associated relation's OID. For a table in the database's default tablespace, the tablespace can be specified as 0.

Table 9.85 shows the functions available for index maintenance tasks. These functions cannot be executed during recovery. Use of these functions is restricted to superusers and the owner of the given index.

brin_summarize_new_values accepts the OID or name of a BRIN index and inspects the index to find page ranges in the base table that are not currently summarized by the index; for any such range it creates a new summary index tuple by scanning the table pages. It returns the number of new page range summaries that were inserted into the index.

gin_clean_pending_list accepts the OID or name of a GIN index and cleans up the pending list of the specified index by moving entries in it to the main GIN data structure in bulk. It returns the number of pages removed from the pending list. Note that if the argument is a GIN index built with thefastupdate option disabled, no cleanup happens and the return value is 0, because the index doesn't have a pending list. Please seeSection 63.4.1 andSection 63.5 for details of the pending list andfastupdate option.

The functions shown inTable 9.86 provide native access to files on the machine hosting the server. Only files within the database cluster directory and thelog_directory can be accessed. Use a relative path for files in the cluster directory, and a path matching thelog_directory configuration setting for log files. Use of these functions is restricted to superusers.

All of these functions take an optionalmissing_ok parameter, which specifies the behavior when the file or directory does not exist. Iftrue, the function returns NULL (exceptpg_ls_dir, which returns an empty result set). Iffalse, an error is raised. The default isfalse.

pg_ls_dir returns the names of all files (and directories and other special files) in the specified directory. The include_dot_dirs indicates whether“.” and“..” are included in the result set. The default is to exclude them (false), but including them can be useful whenmissing_ok istrue, to distinguish an empty directory from an non-existent directory.

pg_read_file returns part of a text file, starting at the givenoffset, returning at mostlength bytes (less if the end of file is reached first). Ifoffset is negative, it is relative to the end of the file. Ifoffset andlength are omitted, the entire file is returned. The bytes read from the file are interpreted as a string in the server encoding; an error is thrown if they are not valid in that encoding.

pg_read_binary_file is similar topg_read_file, except that the result is abytea value; accordingly, no encoding checks are performed. In combination with theconvert_from function, this function can be used to read a file in a specified encoding:

SELECT convert_from(pg_read_binary_file('file_in_utf8.txt'), 'UTF8');

pg_stat_file returns a record containing the file size, last accessed time stamp, last modified time stamp, last file status change time stamp (Unix platforms only), file creation time stamp (Windows only), and aboolean indicating if it is a directory. Typical usages include:

SELECT * FROM pg_stat_file('filename');SELECT (pg_stat_file('filename')).modification;

The functions shown inTable 9.87 manage advisory locks. For details about proper use of these functions, seeSection 13.3.5.

pg_advisory_lock locks an application-defined resource, which can be identified either by a single 64-bit key value or two 32-bit key values (note that these two key spaces do not overlap). If another session already holds a lock on the same resource identifier, this function will wait until the resource becomes available. The lock is exclusive. Multiple lock requests stack, so that if the same resource is locked three times it must then be unlocked three times to be released for other sessions' use.

pg_advisory_lock_shared works the same aspg_advisory_lock, except the lock can be shared with other sessions requesting shared locks. Only would-be exclusive lockers are locked out.

pg_try_advisory_lock is similar topg_advisory_lock, except the function will not wait for the lock to become available. It will either obtain the lock immediately and returntrue, or returnfalse if the lock cannot be acquired immediately.

pg_try_advisory_lock_shared works the same aspg_try_advisory_lock, except it attempts to acquire a shared rather than an exclusive lock.

pg_advisory_unlock will release a previously-acquired exclusive session level advisory lock. It returnstrue if the lock is successfully released. If the lock was not held, it will returnfalse, and in addition, an SQL warning will be reported by the server.

pg_advisory_unlock_shared works the same aspg_advisory_unlock, except it releases a shared session level advisory lock.

pg_advisory_unlock_all will release all session level advisory locks held by the current session. (This function is implicitly invoked at session end, even if the client disconnects ungracefully.)

pg_advisory_xact_lock works the same aspg_advisory_lock, except the lock is automatically released at the end of the current transaction and cannot be released explicitly.

pg_advisory_xact_lock_shared works the same aspg_advisory_lock_shared, except the lock is automatically released at the end of the current transaction and cannot be released explicitly.

pg_try_advisory_xact_lock works the same aspg_try_advisory_lock, except the lock, if acquired, is automatically released at the end of the current transaction and cannot be released explicitly.

pg_try_advisory_xact_lock_shared works the same aspg_try_advisory_lock_shared, except the lock, if acquired, is automatically released at the end of the current transaction and cannot be released explicitly.