pgbouncer
pgbouncer — aPostgres Pro connection pooler
Synopsis
On Linux systems:
pgbouncer [ -d ] [ -R ] [ -v ] [ -uuser ] pgbouncer.ini
pgbouncer -V | -h
On Windows systems:
pgbouncer [ -v ] [ -uuser ] pgbouncer.ini
pgbouncer -V | -h
To usepgbouncer as a Windows service:
pgbouncer.exe --regservice pgbouncer.ini
pgbouncer.exe --unregservice pgbouncer.ini
Description
pgbouncer is aPostgres Pro connection pooler. Any target application can be connected topgbouncer as if it were aPostgres Pro server, andpgbouncer will create a connection to the actual server, or it will reuse one of its existing connections.
The aim ofpgbouncer is to lower the performance impact of opening new connections toPostgres Pro.
In order not to compromise transaction semantics for connection pooling,pgbouncer supports several types of pooling when rotating connections:
- Session pooling
Most polite method. When a client connects, a server connection will be assigned to it for the whole duration the client stays connected. When the client disconnects, the server connection will be put back into the pool. This is the default method.
- Transaction pooling
A server connection is assigned to a client only during a transaction. Whenpgbouncer notices that transaction is over, the server connection will be put back into the pool.
- Statement pooling
Most aggressive method. The server connection will be put back into the pool immediately after a query completes. Multi-statement transactions are disallowed in this mode as they would break.
The administration interface ofpgbouncer consists of some newSHOW commands available when connected to a special“virtual” databasepgbouncer.
Quick Start
Basic setup and usage is as follows.
Create a
pgbouncer.inifile. Details in thepgbouncer(5)man page. Simple example:[databases]template1 = host=127.0.0.1 port=5432 dbname=template1[pgbouncer]listen_port = 6543listen_addr = 127.0.0.1auth_type = md5auth_file = userlist.txtlogfile = pgbouncer.logpidfile = pgbouncer.pidadmin_users = someuser
Create a
userlist.txtfile that contains the users allowed in:"someuser" "same_password_as_in_server"
Launchpgbouncer:
$ pgbouncer -d pgbouncer.ini
Note
The above command does not work on Windows systems. Instead,pgbouncer must be launched as a service that first needs to be registered, as follows:
pgbouncer --regservice
Have your application (or the
psqlclient) connect topgbouncer instead of directly to thePostgres Pro server:$ psql -p 6543 -U someuser template1
Managepgbouncer by connecting to the special administration databasepgbouncer and issuing
SHOW HELP;to begin:$ psql -p 6543 -U someuser pgbouncerpgbouncer=# SHOW HELP;NOTICE: Console usageDETAIL: SHOW [HELP|CONFIG|DATABASES|FDS|POOLS|CLIENTS|SERVERS|SOCKETS|LISTS|VERSION|...] SET key = arg RELOAD PAUSE SUSPEND RESUME SHUTDOWN [...]
If you made changes to the
pgbouncer.inifile, you can reload it with:pgbouncer=# RELOAD;
Options
-dRun in the background. Without it, the process will run in the foreground.
Note
Does not work on Windows,pgbouncer needs to run as service there.
-RDo an online restart. That means connecting to the running process, loading the open sockets from it, and then using them. If there is no active process, boot normally.
-uuserSwitch to the given user on startup.
-vIncrease verbosity. Can be used multiple times.
-qBe quiet: do not log to
stdout. This does not affect logging verbosity, only thatstdoutis not to be used. For use ininit.dscripts.-VShow version.
-hShow short help.
--regserviceWin32: Register to run as Windows service. The
service_nameconfiguration parameter value is used as the name to register under.--unregserviceWin32: Unregister Windows service.
Admin Console
The console is available by connecting as normal to the databasepgbouncer:
$ psql -p 6543 pgbouncer
Only users listed in the configuration parametersadmin_users orstats_users are allowed to log in to the console. (Except whenauth_mode=any, then any user is allowed in as astats_user.)
Additionally, the user name The Shows statistics. In this and related commands, the total figures are since process start, the averages are updated every Statistics are presented per database. Total number ofSQL transactions pooled bypgbouncer. Subset of Subset of Like S, for server. User namepgbouncer uses to connect to server. Database name. State of thepgbouncer server connection, one of IP address ofPostgres Pro server. Port ofPostgres Pro server. Connection start address on local machine. Connection start port on local machine. When the connection was made. When last request was issued. Current waiting time in seconds. Microsecond part of the current waiting time. 1 if the connection will be closed as soon as possible, because a configuration file reload or DNS update changed the connection information or Address of internal object for this connection. Used as unique ID. Address of client connection the server is paired with. PID of backend server process. In case connection is made over Unix socket and OS supports getting process ID info, its OSPID. Otherwise it's extracted from cancel packet the server sent, which should be thePID in case the server isPostgres Pro, but it's a random number in case the server is anotherpgbouncer. A string with TLS connection information, or empty if not using TLS. C, for client. Client connected user. Database name. State of the client connection, one of IP address of client. Port client is connected to. Connection end address on local machine. Connection end port on local machine. Timestamp of connect time. Timestamp of latest client request. Current waiting time in seconds. Microsecond part of the current waiting time. Not used for clients. Address of internal object for this connection. Used as unique ID. Address of server connection the client is paired with. Process ID, in case client connects over Unix socket and OS supports getting it. A string with TLS connection information, or empty if not using TLS. A new pool entry is made for each couple of (database, user). Database name. User name. Client connections that are linked to server connection and can process queries. Client connections have sent queries but have not yet got a server connection. Server connections that linked to a client. Server connections that are unused and immediately usable for client queries. Server connections that have been idle for more than Server connections that are currently running either Server connections currently in the process of logging in. How long the first (oldest) client in the queue has waited, in seconds. If this starts increasing, then the current pool of servers does not handle requests quickly enough. The reason may be either an overloaded server or just too small of a Microsecond part of the maximum waiting time. The pooling mode in use. Show following internal information, in columns (not rows): Count of databases. Count of users. Count of pools. Count of free clients. Count of used clients. Count of clients in Count of free servers. Count of used servers. Count of DNS names in the cache. Count of DNS zones in the cache. Count of in-flight DNS queries. Not used. The user name. The user's override Name of configured database entry. Hostpgbouncer connects to. Portpgbouncer connects to. Actual database namepgbouncer connects to. When the user is part of the connection string, the connection betweenpgbouncer andPostgres Pro is forced to the given user, whatever the client user. Maximum number of server connections. Maximum number of additional connections for this database. The database's override pool_mode, or Maximum number of allowed connections for this database, as set by Current number of connections for this database. 1 if this database is currently paused, else 0. 1 if this database is currently disabled, else 0. Internal command — shows list of file descriptors (FDs) in use with internal state attached to them. When the connected user has the user name This does not work on Windows systems. This command also blocks the internal event loop, so it should not be used whilepgbouncer is in use. File descriptor numeric value. One of User of the connection using the FD. Database of the connection using the FD. IP address of the connection using the FD, Port used by the connection using the FD. Cancel key for this connection. File descriptor for corresponding server/client. Shows low-level information about sockets or only active sockets. This includes the information shown under Show the current configuration settings, one per row, with the following columns: Configuration variable name. Configuration value. Either Shows low-level information about the current sizes of various internal memory allocations. The information presented is subject to change. Show host names inDNS cache. Host name. How many seconds until next lookup. Comma separated list of addresses. pgbouncer tries to disconnect from all servers, first waiting for all queries to complete. The command will not return before all queries are finished. To be used at the time of database restart. If database name is given, only that database will be paused. New client connections to a paused database will wait until Reject all new client connections on the given database. Allow new client connections after a previous Close each open server connection for the given database, or all databases, after it is released (according to the pooling mode), even if its lifetime is not up yet. New server connections can be made immediately and will connect as necessary according to the pool size settings. This command is useful when the server connection setup has changed, for example to perform a gradual switchover to a new server. It is not necessary to run this command when the connection string in After this command is run, there could be an extended period where some server connections go to an old destination and some server connections go to a new destination. This is likely only sensible when switching read-only traffic between read-only replicas, or when switching between nodes of a multimaster replication setup. If all connections need to be switched at the same time, Immediately drop all client and server connections on given database. New client connections to a killed database will wait until All socket buffers are flushed andpgbouncer stops listening for data on them. The command will not return before all buffers are empty. To be used at the time ofpgbouncer online reboot. New client connections to a suspended database will wait until Resume work from previous Thepgbouncer process will exit. Thepgbouncer process will reload its configuration file and update changeable settings. PgBouncer notices when a configuration file reload changes the connection parameters of a database definition. An existing server connection to the old destination will be closed when the server connection is next released (according to the pooling mode), and new server connections will immediately use the updated connection parameters. Wait until all server connections, either of the specified database or of all databases, have cleared the Changes a configuration setting (see alsothe section called “SHOW CONFIG”). For example: (Note that this command is run on thepgbouncer admin console and setspgbouncer settings. A Reload config. Same as issuing the command Safe shutdown. Same as issuing Immediate shutdown. Same as issuing Same as issuing Same as issuing From the libevent documentation: It is possible to disable support for By setting the environment variable The configuration file is in the Specifies log file. Log file is kept open so after rotation Default: not set Specifies the PID file. Without a Default: not set Specifies list of addresses, where to listen for TCP connections. You may also use Addresses can be specified numerically (IPv4/IPv6) or by name. Default: not set Which port to listen on. Applies to both TCP and Unix sockets. Default: 6432 Specifies location for Unix sockets. Applies to both listening socket and server connections. If set to an empty string, Unix sockets are disabled. Required for online reboot (-R) to work. Note: Not supported on Windows systems. Default: /tmp File system mode for Unix socket. Default: 0777 Group name to use for Unix socket. Default: not set If set, specifies the Unix user to change to after startup. Works only ifpgbouncer is started as root or if it's already running as given user. Note: Not supported on Windows systems. Default: not set The name of the file to load user names and passwords from. Seethe section called “Authentication File Format” for details. Default: not set HBA configuration file to use when Default: not set How to authenticate users. Pluggable Authentication Modules (PAM) method is used to authenticate users, Actual authentication type is loaded from Client must connect overTLS connection with valid client certificate. Username is then taken from CommonName field from certificate. Use MD5-based password check. This is the default authentication method. Use password check with SCRAM-SHA-256. Clear-text password is sent over wire. Deprecated. No authentication is done. Username must still exist in Like the Query to load user's password from database. Direct access to Note that the query is run inside target database, so if a function is used it needs to be installed into each database. Default: If Direct access to Default: not set Specifies when a server connection can be reused by other clients. Server is released back to pool after client disconnects. Default. Server is released back to pool after transaction finishes. Server is released back to pool after query finishes. Long transactions spanning multiple statements are disallowed in this mode. Maximum number of client connections allowed. When increased, the file descriptor limits should also be increased. Note that actual number of file descriptors used is more than If a database user is specified in connect string (all users connect under same username), the theoretical maximum is: The theoretical maximum should be never reached, unless somebody deliberately crafts special load for it. Still, it means you should set the number of file descriptors to a safely high number. Search for Default: 100 How many server connections to allow per user/database pair. Can be overridden in the per-database configuration. Default: 20 Add more server connections to pool if below this number. Improves behavior when usual load suddenly comes back after a period of total inactivity. Default: 0 (disabled) How many additional connections to allow to a pool. The 0 value disables this parameter. Default: 0 (disabled) If a client has not been serviced in this many seconds,pgbouncer enables use of additional connections from reserve pool. The 0 value disables this parameter. Default: 5.0 Do not allow more than this many connections per-database (regardless of pool — i.e. user). It should be noted that when you hit the limit, closing a client connection to one pool will not immediately allow a server connection to be established for another pool, because the server connection for the first pool is still open. Once the server connection closes (due to idle timeout), a new server connection will immediately be opened for the waiting pool. Default: unlimited Do not allow more than this many connections per-user (regardless of pool — i.e. user). It should be noted that when you hit the limit, closing a client connection to one pool will not immediately allow a server connection to be established for another pool, because the server connection for the first pool is still open. Once the server connection closes (due to idle timeout), a new server connection will immediately be opened for the waiting pool. By default,pgbouncer reuses server connections in LIFO (last-in, first-out) manner, so that few connections get the most load. This gives best performance if you have a single server serving a database. But if there isTCP round-robin behind a database IP, then it is better ifpgbouncer also uses connections in that manner, thus achieving uniform load. Default: 0 By default,pgbouncer allows only parameters it can keep track of in startup packets — All other parameters will raise an error. To allow other parameters, they can be specified here, so thatpgbouncer knows that they are handled by admin and it can ignore them. Default: empty Disable Simple Query protocol (PQexec). Unlike Extended Query protocol, Simple Query allows multiple queries in one packet, which allows some classes of SQL-injection attacks. Disabling it can improve security. Obviously this means only clients that exclusively use Extended Query protocol will stay working. Default: 0 Add the client host address and port to the application name setting set on connection start. This helps in identifying the source of bad queries, etc. This logic applies only on start of connection, if Default: 0 Show location of current configuration file. Changing it will makepgbouncer use another configuration file for next Default: file from command line. Used on win32 service registration. Default: pgbouncer Alias for Sets how often the averages shown in various Default: 60 Togglessyslog on/off. On Windows systems,eventlog is used instead. Default: 0 Under what name to send logs tosyslog. Default: Under what facility to send logs tosyslog. Possibilities: Default: daemon Log successful logins. Default: 1 Log disconnections with reasons. Default: 1 Log error messages pooler sends to clients. Default: 1 Period for writing aggregated stats into log. Default: 60 Write aggregated statistics into the log, every Default: 1 Increase verbosity. Mirrors "-v" switch on command line. Using "-v -v" on command line is same as Default: 0 Comma-separated list of database users that are allowed to connect and run all commands on console. Ignored when Default: empty Comma-separated list of database users that are allowed to connect and run read-only queries on console. That means all SHOW commands except SHOW FDS. Default: empty. Query sent to server on connection release, before making it available to other clients. At that moment no transaction is in progress so it should not include The query is supposed to clean any changes made to database session so that next client gets connection in well-defined state. Default is When transaction pooling is used, the Default: DISCARD ALL Whether It is workaround for broken setups that run apps that use session features over transaction-pooledpgbouncer. It changes non-deterministic breakage to deterministic breakage — client always lose their state after each transaction. Default: 0 How long to keep released connections available for immediate re-use, without running sanity-check queries on it. If 0 then the query is always run. Default: 30.0 Simple do-nothing query to check if the server connection is alive. If an empty string, then sanity checking is disabled. Default: SELECT 1; Disconnect a server in session pooling mode immediately or after the end of the current transaction if it is in If because of this setting a server connection is closed before the end of the client session, the client connection is also closed. This ensures that the client notices that the session has been interrupted. This setting makes connection configuration changes take effect sooner if session pooling and long-running sessions are used. The downside is that client sessions are liable to be interrupted by a configuration change, so client applications will need logic to reconnect and reestablish session state. But note that no transactions will be lost, because running transactions are not interrupted, only idle sessions. Default: 0 The pooler will close an unused server connection that has been connected longer than this. Setting it to 0 means the connection is to be used only once, then closed. [seconds] Default: 3600.0 If a server connection has been idle more than this many seconds it will be dropped. If 0 then timeout is disabled. [seconds] Default: 600.0 If connection and login won't finish in this amount of time, the connection will be closed. [seconds] Default: 15.0 If login failed, because of failure from connect() or authentication that pooler waits this much before retrying to connect. [seconds] Default: 15.0 If a client connects but does not manage to login in this amount of time, it will be disconnected. Mainly needed to avoid dead connections stalling SUSPEND and thus online restart. [seconds] Default: 60.0 If the automatically created (via "*") database pools have been unused this many seconds, they are freed. The negative aspect of that is that their statistics are also forgotten. [seconds] Default: 3600.0 How long the DNS lookups can be cached. If a DNS lookup returns several answers,pgbouncer will robin-between them in the meantime. Actual DNS TTL is ignored. [seconds] Default: 15.0 How long error and NXDOMAIN DNS lookups can be cached. [seconds] Default: 15.0 Period to check if zone serial has changed. TLS mode to use for connections from clients.TLS connections are disabled by default. When enabled, PlainTCP. If client requestsTLS, it's ignored. Default. If client requestsTLS, it is used. If not, plainTCP is used. If client uses client-certificate, it is not validated. Same as Client must useTLS. If not, client connection is rejected. If client uses client-certificate, it is not validated. Client must useTLS with valid client certificate. Same as Private key forpgbouncer to accept client connections. Default: not set. Certificate for private key. Clients can validate it. Default: not set. Root certificate file to validate client certificates. Default: unset. WhichTLS protocol versions are allowed. Allowed values: Default: Default: Elliptic Curve name to use for ECDH key exchanges. Allowed values: Default: DHE key exchange type. Allowed values: Default: TLS mode to use for connections toPostgres Pro servers.TLS connections are disabled by default. PlainTCP.TLS is not even requested from server. Default. TLS connection is always requested first fromPostgres Pro, when refused connection will be established over plainTCP. Server certificate is not validated. Connection must go overTLS. If server rejects it, plainTCP is not attempted. Server certificate is not validated. Connection must go overTLS and server certificate must be valid according to Connection must go overTLS and server certificate must be valid according to Root certificate file to validatePostgres Pro server certificates. Default: unset. Private key forpgbouncer to authenticate againstPostgres Pro server. Default: not set. Certificate for private key.Postgres Pro server can validate it. Default: not set. Setting the following timeouts causes unexpected errors. Queries running longer than that are canceled. This should be used only with slightly smaller server-side Default: 0.0 (disabled) Maximum time queries are allowed to spend waiting for execution. If the query is not assigned to a server during that time, the client is disconnected. This is used to prevent unresponsive servers from grabbing up connections. [seconds] It also helps when server is down or database rejects connections for any reason. If this is disabled, clients will be queued infinitely. Default: 120 Client connections idling longer than this many seconds are closed. This should be larger than the client-side connection lifetime settings, and only used for network problems. [seconds] Default: 0.0 (disabled) If client has been in "idle in transaction" state longer, it will be disconnected. [seconds] Default: 0.0 (disabled) Internal buffer size for packets. Affects size ofTCP packets sent and general memory usage. Actuallibpq packets can be larger than this, so, no need to set it large. Default: 4096 Maximum size forPostgres Pro packets thatpgbouncer allows through. One packet is either one query or one result set row. Full result set can be larger. Default: 2147483647 Backlog argument for listen(2). Determines how many new unanswered connection attempts are kept in queue. When queue is full, further new connections are dropped. Default: 128 How many times to process data on one connection, before proceeding. Without this limit, one connection with a big result set can stallpgbouncer for a long time. One loop processes one Default: 5 How many seconds to wait for buffer flush during SUSPEND or reboot (-R). Connection is dropped if flush does not succeed. Default: 10 This contains key=value pairs where key will be taken as a database name and value as alibpq connect-string style list of key=value pairs. As actuallibpq is not used, not all features fromlibpq can be used (service=, .pgpass). Database name can contain characters "*" acts as fallback database: if the exact name does not exist, its value is taken as connect string for requested database. Such automatically created database entries are cleaned up if they stay idle longer than the time specified in Destination database name. Default: same as client-side database name. Host name or IP address to connect to. Host names are resolved at connect time, the result is cached per Default: not set, meaning to use a Unix socket. Default: 5432 If Otherwisepgbouncer tries to log into the destination database with client username, meaning that there will be one pool per user. The length for If no password is specified here, the password from the Override of the global Set maximum size of pools for this database. If not set, the Set additional connections for this database. If not set, Query to be executed after a connection is established, but before allowing the connection to be used by any clients. If the query raises errors, they are logged but ignored otherwise. Set the pool mode specific to this database. If not set, the default pool_mode is used. Configure a database-wide maximum (i.e. all pools within the database will not have more than this many server connections). Ask specific Ask specific Ask specific This contains key=value pairs where the key will be taken as a user name and the value as alibpq connect-string style list of key=value pairs of configuration settings specific for this user. Only a few settings are available here. Set the pool mode to be used for all connections from this user. If not set, the database or default pool_mode is used. Configure a maximum for the user (i.e. all pools with the user will not have more than this many server connections). Thepgbouncer config file can contain include directives, which specify another configuration file to read and process. This allows for splitting the configuration file into physically separate parts. The include directives look like this: If the file name is not absolute path it is taken as relative to current working directory. pgbouncer needs its own user database. The users are loaded from a text file in following format: There should be at least two fields, surrounded by double quotes. The first field is the username and the second is either a plain-text, a MD5-hidden password, or a SCRAM secret.pgbouncer ignores the rest of the line. Postgres Pro MD5-hidden password format: So user Postgres Pro SCRAM secret format: The authentication file can be written by hand, but it's also useful to generate it from some other list of users and passwords. See It follows the format ofPostgres Pro Supported record types: Database field: Supports Username field: Supports Address field: Supported Auth-method field: Only methods supported bypgbouncer's Minimal config: Database defaults: Example of a secure function forpgbouncer is allowed to log in without password, if the login comes via the Unix socket and the client has same Unix useruid as the running process.Show Commands
SHOW commands output information. Each command is described below.SHOW STATS
stats_period. database total_xact_count total_query_countSHOW STATS_TOTALS
SHOW STATS showing the total values (total_).SHOW STATS_AVERAGES
SHOW STATS showing the average values (avg_).SHOW TOTALS
SHOW STATS but aggregated across all databases.SHOW SERVERS
type user database stateactive,used oridle. addr port local_addr local_port connect_time request_time wait wait_us close_neededRECONNECT was issued. ptr link remote_pid tlsSHOW CLIENTS
type user database stateactive,used,waiting oridle. addr port local_addr local_port connect_time request_time wait wait_us close_needed ptr link remote_pid tlsSHOW POOLS
database user cl_active cl_waiting sv_active sv_idle sv_usedserver_check_delay, so they needserver_check_query to run on them before they can be used again. sv_testedserver_reset_query orserver_check_query. sv_login maxwaitpool_size setting. maxwait_us pool_modeSHOW LISTS
databases users pools free_clients used_clients login_clientslogin state. free_servers used_servers dns_names dns_zones dns_queries dns_pendingSHOW USERS
name pool_modepool_mode, orNULL if the default will be used instead.SHOW DATABASES
name host port database force_user pool_size reserve_pool pool_modeNULL if the default will be used instead. max_connectionsmax_db_connections, either globally or per database. current_connections paused disabledSHOW FDS
pgbouncer, connects through the Unix socket and has the sameUID as the running process, the actual FDs are passed over the connection. This mechanism is used to do an online restart.Note
fd taskpooler,client orserver. user database addrunix if a Unix socket is used. port cancel linkNULL if idle.SHOW SOCKETS, SHOW ACTIVE_SOCKETS
SHOW CLIENTS andSHOW SERVERS as well as other more low-level information.SHOW CONFIG
key value changeableyes orno, shows if the variable can be changed while running. Ifno, the variable can be changed only at boot-time. UseSET to change a variable at run time.SHOW MEM
SHOW DNS_HOSTS
hostname ttl addrsProcess Controlling Commands
PAUSE [
db]RESUME is called.DISABLE
dbENABLE
dbDISABLE command.RECONNECT
dbpgbouncer.ini has been changed and reloaded (seeRELOAD) or when DNS resolution has changed, because then the equivalent of this command will be run automatically. This command is only necessary if something downstream ofpgbouncer routes the connections.PAUSE is recommended instead. To close server connections without waiting (for example, in emergency failover rather than gradual switchover scenarios), also considerKILL.KILL
dbRESUME is called.SUSPEND
RESUME is called.RESUME [
db]KILL,PAUSE, orSUSPEND command.SHUTDOWN
RELOAD
WAIT_CLOSE [
db]close_needed state (seethe section called “SHOW SERVERS”). This can be called after aRECONNECT orRELOAD to wait until the respective configuration change has been fully activated, for example in switchover scripts.Other Commands
SET
key =argSET log_connections = 1;SET server_check_query = 'select 2';
SET command run on another database will be passed to thePostgres Pro backend like any other SQL command.)Signals
SIGHUPRELOAD on the console. SIGINTPAUSE andSHUTDOWN on the console. SIGTERMSHUTDOWN on the console. SIGUSR1PAUSE on the console. SIGUSR2RESUME on the console.Libevent Settings
epoll,kqueue,devpoll,poll, orselect by setting the environment variableEVENT_NOEPOLL,EVENT_NOKQUEUE,EVENT_NODEVPOLL,EVENT_NOPOLL orEVENT_NOSELECT, respectively.EVENT_SHOW_METHOD,libevent displays the kernel notification method that it uses.pgbouncer.ini Configuration File.ini format. Section names are between "[" and "]". Lines starting with ";" or "#" are taken as comments and ignored. The characters ";" and "#" are not recognized when they appear later in the line.Generic Settings
logfilekill -HUP or on consoleRELOAD; should be done. Note: On Windows systems, the service must be stopped and started.pidfilepidfile, daemonization is not allowed.listen_addr* meaning "listen on all addresses". When not set, only Unix socket connections are allowed.listen_portunix_socket_dirunix_socket_modeunix_socket_groupuserauth_fileauth_hba_fileauth_type ishba. Supported from version 1.7 onwards.auth_type pamauth_file is ignored. This method is not compatible with databases usingauth_user option. Service name reported toPAM ispgbouncer. Also,PAM is still not supported inHBA configuration file. hbaauth_hba_file. This allows different authentication methods different access paths. Example: connection over Unix socket usespeer authentication method, connection overTCP must useTLS. Supported from version 1.7 onwards. cert md5auth_file may contain both MD5-encrypted or plain-text passwords. Ifmd5 is configured and a user has a SCRAM secret, then SCRAM authentication is used automatically instead. scram-sha-256auth_file has to contain SCRAM secrets or plain-text passwords. Note that SCRAM secrets can only be used for verifying the password of a client but not for logging into a server. To be able to use SCRAM on server connections, use plain-text passwords. plain trustauth_file. anytrust method, but the username given is ignored. Requires that all databases are configured to log in as specific user. Additionally, the console database allows any user to log in as admin.auth_querypg_shadow requires admin rights. It's preferable to use non-admin user that calls SECURITY DEFINER function instead.SELECT usename, passwd FROM pg_shadow WHERE usename=$1auth_userauth_user is set, any user not specified inauth_file will be queried through theauth_query query frompg_shadow in the database usingauth_user.auth_user's password will be taken fromauth_file.pg_shadow requires admin rights. It's preferable to use non-admin user that calls SECURITY DEFINER function instead.pool_mode session transaction statementmax_client_connmax_client_conn. If each user connects under its own username to server, theoretical maximum used is:max_client_conn + (max pool_size * total databases * total users)
max_client_conn + (max pool_size * total databases)
ulimit in your favorite shell man page. Note:ulimit does not apply in a Windows environment.default_pool_sizemin_pool_sizereserve_pool_sizereserve_pool_timeoutmax_db_connectionsmax_user_connectionsserver_round_robinignore_startup_parametersclient_encoding,datestyle,timezone andstandard_conforming_strings.disable_pqexecapplication_name_add_hostapplication_name is later changed withSET,pgbouncer does not change it again.conffileRELOAD /SIGHUP.service_namejob_nameservice_name.stats_periodSHOW commands are updated and how often aggregated statistics are written to the log (but seelog_stats). [seconds]Log Settings
syslogsyslog_identpgbouncer (program name)syslog_facilityauth,authpriv,daemon,user,local0-7.log_connectionslog_disconnectionslog_pooler_errorsstats_periodlog_statsstats_period. This can be disabled if external monitoring tools are used to grab the same data fromSHOW commands.verboseverbose=2 in configuration file.Console Access Control
admin_usersauth_type isany, in which case any username is allowed in as admin.stats_usersConnection Sanity Checks, Timeouts
server_reset_queryABORT orROLLBACK.DISCARD ALL which cleans everything, but that leaves next client no pre-cached state. It can be made lighter, e.g.DEALLOCATE ALL to just drop prepared statements, if application does not break when some state is kept around.server_reset_query is not used, as clients must not use any session-based features as each transaction ends up in different connection and thus gets different session state.server_reset_query_alwaysserver_reset_query should be run in all pooling modes. When this setting is off (default), theserver_reset_query will be run only in pools that are in sessions-pooling mode. Connections in transaction-pooling mode should not have any need for reset query.server_check_delayserver_check_queryserver_fast_closeclose_needed mode (set byRECONNECT,RELOAD that changes connection settings, or DNS change), rather than waiting for the session end. In statement or transaction pooling mode, this has no effect since that is the default behavior there.server_lifetimeserver_idle_timeoutserver_connect_timeoutserver_login_retryclient_login_timeoutautodb_idle_timeoutdns_max_ttldns_nxdomain_ttldns_zone_check_periodTLS Settings
client_tls_sslmodeclient_tls_key_file andclient_tls_cert_file must be also configured to set up key and certpgbouncer uses to accept client connections. disable allow preferallow. require verify-ca verify-fullverify-ca.client_tls_key_fileclient_tls_cert_fileclient_tls_ca_fileclient_tls_protocolstlsv1.0,tlsv1.1,tlsv1.2,tlsv1.3. Shortcuts:all (tlsv1.0,tlsv1.1,tlsv1.2,tlsv1.3),secure (tlsv1.2,tlsv1.3),legacy (all).allclient_tls_ciphersfastclient_tls_ecdhcurvenone (DH is disabled),auto (256-bit ECDH), curve name.autoclient_tls_dheparamsnone (DH is disabled),auto (2048-bit DH),legacy (1024-bit DH).autoserver_tls_sslmode disable prefer require verify-caserver_tls_ca_file. Server host name is not checked against certificate. verify-fullserver_tls_ca_file. Server host name must match certificate info.server_tls_ca_fileserver_tls_key_fileserver_tls_cert_fileserver_tls_protocolsDangerous Timeouts
query_timeoutstatement_timeout, to apply only for network problems. [seconds]query_wait_timeoutclient_idle_timeoutidle_transaction_timeoutLow-Level Network Settings
pkt_bufmax_packet_sizelisten_backlogsbuf_loopcntpkt_buf amount of data. 0 means no limit.suspend_timeouttcp_defer_acceptSection [databases]
_0-9A-Za-z without quoting. Names that contain other chars need to be quoted with standard SQL ident quoting: double quotes where "" is taken as single quote.autodb_idle_timeout parameter.dbnamehostdns_max_ttl parameter. When a host name's resolution changes, existing server connections are automatically closed when they are released (according to the pooling mode), and new server connections immediately use the new resolution. IfDNS returns several results, they are used in round-robin manner.portuseruser= is set, all connections to the destination database will be done with the specified user, meaning that there will be only one pool for this database.passwordpassword is limited to 160 characters maximum.auth_file orauth_query will be used.auth_userauth_user setting, if specified.pool_sizedefault_pool_size is used.reserve_poolreserve_pool_size is used.connect_querypool_modemax_db_connectionsclient_encodingclient_encoding from server.datestyledatestyle from server.timezonetimezone from server.Section [users]
pool_modemax_user_connectionsInclude Directive
%include
filenameAuthentication File Format
"username1" "password" ..."username2" "md5abcdef012342345" ..."username2" "SCRAM-SHA-256$
iterations:salt$storedkey:serverkey""md5" + md5(password + username)
admin with password1234 will have MD5-hidden passwordmd545f2603610af569b6155c45067268c6b.SCRAM-SHA-256$
iterations:salt$storedkey:serverkey./etc/mkauth.py for a sample script to generate the authentication file from thepg_shadow system table.HBA File Format
pg_hba.conf file described inSection 19.1.local,host,hostssl,hostnossl.all,sameuser, @file, multiple names. Not supported:replication,samerole,samegroup.all, @file, multiple names. Not supported:+groupname.IPv4,IPv6. Not supported: DNS names, domain prefixes.auth_type are supported, exceptany andpam, which only work globally. Username map (map=) parameter is not supported.Example
[databases]template1 = host=127.0.0.1 dbname=template1 auth_user=someuser[pgbouncer]pool_mode = sessionlisten_port = 6543listen_addr = 127.0.0.1auth_type = md5auth_file = users.txtlogfile = pgbouncer.logpidfile = pgbouncer.pidadmin_users = someuserstats_users = stat_collector
[databases]; foodb over Unix socketfoodb =; redirect bardb to bazdb on localhostbardb = host=127.0.0.1 dbname=bazdb; access to destination database will go with single userforcedb = host=127.0.0.1 port=300 user=baz password=foo client_encoding=UNICODE datestyle=ISO
auth_query:CREATE OR REPLACE FUNCTION pgbouncer.user_lookup(in i_username text, out uname text, out phash text)RETURNS record AS $$BEGIN SELECT usename, passwd FROM pg_catalog.pg_shadow WHERE usename = i_username INTO uname, phash; RETURN;END;$$ LANGUAGE plpgsql SECURITY DEFINER;REVOKE ALL ON FUNCTION pgbouncer.user_lookup(text) FROM public, pgbouncer;GRANT EXECUTE ON FUNCTION pgbouncer.user_lookup(text) TO pgbouncer;