pnpm gets its configuration from the command line, environment variables, and.npmrc files.

Thepnpm config command can be used to update and edit the contents of theuser and global.npmrc files.

4개의 관련된 파일은 다음과 같습니다.

• per-project configuration file (/path/to/my/project/.npmrc)
• per-workspace configuration file (the directory that contains thepnpm-workspace.yaml file)
• per-user configuration file (~/.npmrc)
• global configuration file (/etc/npmrc)

All.npmrc files are anINI-formatted list ofkey = value parameters.

Values in the.npmrc files may contain env variables using the${NAME} syntax. 환경 변수의 기본값을 지정할 수도 있습니다. Using${NAME-fallback} will returnfallback ifNAME isn't set.${NAME:-fallback} will returnfallback ifNAME isn't set, or is an empty string.

의존성 호이스팅 설정​

hoist​

• Default:true
• Type:boolean

Whentrue, all dependencies are hoisted tonode_modules/.pnpm/node_modules. This makesunlisted dependencies accessible to all packages insidenode_modules.

hoist-workspace-packages​

• Default:true
• Type:boolean

Whentrue, packages from the workspaces are symlinked to either<workspace_root>/node_modules/.pnpm/node_modules or to<workspace_root>/node_modules depending on other hoisting settings (hoist-pattern andpublic-hoist-pattern).

hoist-pattern​

• Default:['*']
• Type:string[]

Tells pnpm which packages should be hoisted tonode_modules/.pnpm/node_modules. 기본적으로 모든 패키지는 호이스팅됩니다, 하지만 유령 의존성을 갖는 잘못된 패키지를 알고 있다면 이 옵션을 이용해 유령 의존성을 호이스팅할 수 있습니다. (권장)

예를 들어:

hoist-pattern[]=*eslint*
hoist-pattern[]=*babel*

You may also exclude patterns from hoisting using!.

예를 들어:

hoist-pattern[]=*types*
hoist-pattern[]=!@types/react

public-hoist-pattern​

• Default:[]
• Type:string[]

Unlikehoist-pattern, which hoists dependencies to a hidden modules directoryinside the virtual store,public-hoist-pattern hoists dependencies matchingthe pattern to the root modules directory. 루트 모듈 디렉토리에 대한 호이스팅은 애플리케이션 코드가 해결 전략을 부적절하게 수정하더라도 유령 의존성에 액세스할 수 있음을 의미합니다.

이 설정은 의존성을 제대로 해결하지 못하는 일부 결함이 있는 플러그형 도구를 처리할 때 유용합니다.

예를 들어:

public-hoist-pattern[]=*plugin*

Note: Settingshamefully-hoist totrue is the same as settingpublic-hoist-pattern to*.

You may also exclude patterns from hoisting using!.

예를 들어:

public-hoist-pattern[]=*types*
public-hoist-pattern[]=!@types/react

shamefully-hoist​

• Default:false
• Type:Boolean

By default, pnpm creates a semistrictnode_modules, meaning dependencies haveaccess to undeclared dependencies but modules outside ofnode_modules do not.이 레이아웃을 사용하면 생태계의 대부분의 패키지가 문제 없이 작동합니다.However, if some tooling only works when the hoisted dependencies are in theroot ofnode_modules, you can set this totrue to hoist them for you.

Node-Modules 설정​

modules-dir​

• Default:node_modules
• Type:path

The directory in which dependencies will be installed (instead ofnode_modules).

node-linker​

• Default:isolated
• Type:isolated,hoisted,pnp

노드 패키지 설치에 사용해야 하는 링커를 정의합니다.

• isolated - dependencies are symlinked from a virtual store atnode_modules/.pnpm.
• hoisted - a flatnode_modules without symlinks is created. Same as thenode_modules created by npm or Yarn Classic. 이 설정을 사용하면 Yarn의 라이브러리 중 하나가 호이스팅에 사용됩니다. 이 설정을 사용해야 하는 정당한 이유:
  1. 여러분의 도구가 심볼릭 링크와 잘 작동하지 않습니다. A React Native project will most probably only work if you use a hoistednode_modules.
  2. 여러분의 프로젝트가 서버리스 호스팅 제공업체에 배포됩니다. 일부 서버리스 공급자 (예: AWS Lambda)는 심볼릭 링크를 지원하지 않습니다. 이 문제에 대한 대안 솔루션은 배포 전에 애플리케이션을 번들로 묶는 것입니다.
  3. If you want to publish your package with"bundledDependencies".
  4. If you are running Node.js with the--preserve-symlinks flag.
• pnp - nonode_modules. Plug'n'Play is an innovative strategy for Node that isused by Yarn Berry. It is recommended to also setsymlink setting tofalse when usingpnp asyour linker.

symlink​

• Default:true
• Type:Boolean

Whensymlink is set tofalse, pnpm creates a virtual store directory withoutany symlinks. It is a useful setting together withnode-linker=pnp.

enable-modules-dir​

• Default:true
• Type:Boolean

Whenfalse, pnpm will not write any files to the modules directory(node_modules). 이것은 모듈 디렉토리가 사용자 공간 (FUSE) 의 파일 시스템으로 마운트될 때 유용합니다. There is an experimental CLI that allows you tomount a modules directory with FUSE:@pnpm/mount-modules.

virtual-store-dir​

• Default:node_modules/.pnpm
• Types:path

저장소에 대한 링크가 있는 디렉토리입니다.프로젝트의 모든 직접 및 간접 의존성이 이 디렉토리에 연결됩니다.

이것은 Windows에서 긴 경로 문제를 해결할 수 있는 유용한 설정입니다. Ifyou have some dependencies with very long paths, you can select a virtual storein the root of your drive (for instanceC:\my-project-store).

Or you can set the virtual store to.pnpm and add it to.gitignore. 이렇게 하면 의존성 경로가 한 디렉토리 더 높기 때문에 스택 트레이스를 더 깔끔하게 만들 수 있습니다.

NOTE: the virtual store cannot be shared between several projects. 모든 프로젝트에는 자체 가상 저장소가 있어야 합니다(루트가 공유되는 워크스페이스 제외).

virtual-store-dir-max-length​

• 기본값:
  • On Linux/macOS:120
  • On Windows:60
• Types:number

Sets the maximum allowed length of directory names inside the virtual store directory (node_modules/.pnpm). You may set this to a lower number if you encounter long path issues on Windows.

package-import-method​

• Default:auto
• Type:auto,hardlink,copy,clone,clone-or-copy

Controls the way packages are imported from the store (if you want to disable symlinks insidenode_modules, then you need to change thenode-linker setting, not this one).

• auto - try to clone packages from the store. 복제가 지원되지 않으면 저장소에서 패키지를 하드링크합니다. 복제도, 연결도 불가능하면 복사로 대체합니다.
• hardlink - hard link packages from the store
• clone-or-copy - try to clone packages from the store. 복제가 지원되지 않으면 복사로 대체합니다.
• copy - copy packages from the store
• clone - clone (AKA copy-on-write or reference link) packages from the store

node_modules에 패키지를 작성할 때 복제가 가장 좋은 방법입니다. 가장 빠르고 안전한 방법입니다. 복제를 사용하면 node_modules에서 파일을 편집할 수 있으며, 이는 중앙 content-addressable 저장소에서 수정되지 않습니다.

불행히도 모든 파일 시스템이 복제를 지원하는 것은 아닙니다. 최고의 pnpm 경험을 위해 CoW(Copy-On-Write) 파일 시스템(예: Linux에서 Ext4 대신 Btrfs)을 사용하는 것이 좋습니다.

modules-cache-max-age​

• Default:10080 (7 days in minutes)
• Type:number

모듈 디렉토리에서 고아 패키지를 제거해야 하는 시간(분)입니다.pnpm은 모듈 디렉토리에 패키지 캐시를 유지합니다. 이렇게 하면 브랜치를 전환하거나 의존성을 다운그레이드할 때 설치 속도가 향상됩니다.

dlx-cache-max-age​

• Default:1440 (1 day in minutes)
• Type:number

The time in minutes after which dlx cache expires.After executing a dlx command, pnpm keeps a cache that omits the installation step for subsequent calls to the same dlx command.

Store Settings​

store-dir​

• 기본값:
  • If the$PNPM_HOME env variable is set, then$PNPM_HOME/store
  • If the$XDG_DATA_HOME env variable is set, then$XDG_DATA_HOME/pnpm/store
  • On Windows:~/AppData/Local/pnpm/store
  • On macOS:~/Library/pnpm/store
  • On Linux:~/.local/share/pnpm/store
• Type:path

모든 패키지가 저장되는 디스크 위치입니다.

저장소는 항상 설치가 발생하는 동일한 디스크에 있어야 합니다. 따라서 디스크당 하나의 저장소가 있도록 합니다. 현재 디스크에 홈 디렉토리가 있으면, 그 안에 저장소가 생성됩니다. 디스크에 홈이 없으면 파일 시스템의 루트에서 저장소가 생성됩니다. Forexample, if installation is happening on a filesystem mounted at/mnt,then the store will be created at/mnt/.pnpm-store. Windows 시스템도 마찬가지입니다.

다른 디스크에서 저장소를 설정할 수 있지만, 이 경우 pnpm은 하드 링크 대신 저장소에서 패키지를 복사합니다. 하드 링크는 동일한 파일 시스템에서만 가능하기 때문입니다.

verify-store-integrity​

• Default:true
• Type:Boolean

By default, if a file in the store has been modified, the content of this file is checked before linking it to a project'snode_modules. Ifverify-store-integrity is set tofalse, files in the content-addressable store will not be checked during installation.

use-running-store-server​

• Default:false
• Type:Boolean

Only allows installation with a store server. If no store server is running,installation will fail.

strict-store-pkg-content-check​

• Default:true
• Type:Boolean

Some registries allow the exact same content to be published under different package names and/or versions. This breaks the validity checks of packages in the store. To avoid errors when verifying the names and versions of such packages in the store, you may set thestrict-store-pkg-content-check setting tofalse.

Lockfile 설정​

lockfile​

• Default:true
• Type:Boolean

When set tofalse, pnpm won't read or generate apnpm-lock.yaml file.

prefer-frozen-lockfile​

• Default:true
• Type:Boolean

When set totrue and the availablepnpm-lock.yaml satisfies thepackage.json dependencies directive, a headless installation is performed. Aheadless installation skips all dependency resolution as it does not need tomodify the lockfile.

lockfile-include-tarball-url​

• Default:false
• Type:Boolean

Add the full URL to the package's tarball to every entry inpnpm-lock.yaml.

git-branch-lockfile​

• Default:false
• Type:Boolean

When set totrue, the generated lockfile name after installation will be namedbased on the current branch name to completely avoid merge conflicts. For example,if the current branch name isfeature-foo, the corresponding lockfile name willbepnpm-lock.feature-foo.yaml instead ofpnpm-lock.yaml. It is typically usedin conjunction with the command line argument--merge-git-branch-lockfiles or bysettingmerge-git-branch-lockfiles-branch-pattern in the.npmrc file.

merge-git-branch-lockfiles-branch-pattern​

• Default:null
• Type:Array or null

이 설정은 현재 분기 이름을 확인하여 모든 깃 브랜치의 lockfile을 병합할지 여부를 결정합니다. By default, you need to manually pass the--merge-git-branch-lockfiles command line parameter. 이 구성을 사용하면 이 프로세스가 자동으로 완료됩니다.

예를 들어:

merge-git-branch-lockfiles-branch-pattern[]=main
merge-git-branch-lockfiles-branch-pattern[]=release*

You may also exclude patterns using!.

peers-suffix-max-length​

• Default:1000
• Type:number

Max length of the peer IDs suffix added to dependency keys in the lockfile. If the suffix is longer, it is replaced with a hash.

Registry & Authentication Settings​

registry​

• Default:https://registry.npmjs.org/
• Type:url

The base URL of the npm package registry (trailing slash included).

<scope>:registry​

The npm registry that should be used for packages of the specified scope. Forexample, setting@babel:registry=https://example.com/packages/npm/will enforce that when you usepnpm add @babel/core, or any@babel scopedpackage, the package will be fetched fromhttps://example.com/packages/npminstead of the default registry.

<URL>:_authToken​

Define the authentication bearer token to use when accessing the specifiedregistry. 예시:

//registry.npmjs.org/:_authToken=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

You may also use an environment variable. 예시:

//registry.npmjs.org/:_authToken=${NPM_TOKEN}

Or you may just use an environment variable directly, without changing.npmrc at all:

npm_config_//registry.npmjs.org/:_authToken=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

<URL>:tokenHelper​

A token helper is an executable which outputs an auth token. This can be used in situations where the authToken is not a constant value but is something that refreshes regularly, where a script or other tool can use an existing refresh token to obtain a new access token.

The configuration for the path to the helper must be an absolute path, with no arguments. In order to be secure, it is only permitted to set this value in the user.npmrc. Otherwise a project could place a value in a project's local.npmrc and run arbitrary executables.

Setting a token helper for the default registry:

tokenHelper=/home/ivan/token-generator

Setting a token helper for the specified registry:

//registry.corp.com:tokenHelper=/home/ivan/token-generator

Request Settings​

ca​

• Default:The npm CA certificate
• Type:String, Array or null

레지스트리에 대한 SSL 연결을 위해 신뢰되는 인증 기관 서명 인증서입니다. Values should be in PEM format (AKA"Base-64 encoded X.509 (.CER)"). 예시:

ca="-----BEGIN CERTIFICATE-----\nXXXX\nXXXX\n-----END CERTIFICATE-----"

Set to null to only allow known registrars, or to a specific CA cert to trustonly that specific signing authority.

Multiple CAs can be trusted by specifying an array of certificates:

ca[]="..."
ca[]="..."

See also thestrict-ssl config.

cafile​

• Default:null
• Type:path

A path to a file containing one or multiple Certificate Authority signingcertificates. Similar to theca setting, but allows for multiple CAs, as wellas for the CA information to be stored in a file instead of being specified viaCLI.

<URL>:cafile​

Define the path to a Certificate Authority file to use when accessing the specifiedregistry. 예시:

//registry.npmjs.org/:cafile=ca-cert.pem

cert​

• Default:null
• Type:String

A client certificate to pass when accessing the registry. Values should be inPEM format (AKA "Base-64 encoded X.509 (.CER)"). 예시:

cert="-----BEGIN CERTIFICATE-----\nXXXX\nXXXX\n-----END CERTIFICATE-----"

It is not the path to a certificate file.

<URL>:certfile​

Define the path to a certificate file to use when accessing the specifiedregistry. 예시:

//registry.npmjs.org/:certfile=server-cert.pem

key​

• Default:null
• Type:String

A client key to pass when accessing the registry. Values should be in PEM format(AKA "Base-64 encoded X.509 (.CER)"). 예시:

key="-----BEGIN PRIVATE KEY-----\nXXXX\nXXXX\n-----END PRIVATE KEY-----"

It is not the path to a key file (and there is nokeyfile option).

This setting contains sensitive information. Don't write it to a local.npmrc file committed to the repository.

<URL>:keyfile​

Define the path to a client key file to use when accessing the specifiedregistry. 예시:

//registry.npmjs.org/:keyfile=server-key.pem

git-shallow-hosts​

• Default:['github.com', 'gist.github.com', 'gitlab.com', 'bitbucket.com', 'bitbucket.org']
• Type:string[]

When fetching dependencies that are Git repositories, if the host is listed in this setting, pnpm will use shallow cloning to fetch only the needed commit, not all the history.

https-proxy​

• Default:null
• Type:url

A proxy to use for outgoing HTTPS requests. If theHTTPS_PROXY,https_proxy,HTTP_PROXY orhttp_proxy environment variables are set, their values will beused instead.

If your proxy URL contains a username and password, make sure to URL-encode them.예를 들어:

https-proxy=https://use%21r:pas%2As@my.proxy:1234/foo

Do not encode the colon (:) between the username and password.

http-proxy​

proxy​

• Default:null
• Type:url

A proxy to use for outgoing http requests. If the HTTP_PROXY or http_proxyenvironment variables are set, proxy settings will be honored by the underlyingrequest library.

local-address​

• Default:undefined
• Type:IP Address

The IP address of the local interface to use when making connections to the npmregistry.

maxsockets​

• Default:network-concurrency x 3
• Type:Number

The maximum number of connections to use per origin (protocol/host/port combination).

noproxy​

• Default:null
• Type:String

A comma-separated string of domain extensions that a proxy should not be used for.

strict-ssl​

• Default:true
• Type:Boolean

Whether or not to do SSL key validation when making requests to the registry viaHTTPS.

See also theca option.

network-concurrency​

• Default:16
• Type:Number

Controls the maximum number of HTTP(S) requests to process simultaneously.

fetch-retries​

• Default:2
• Type:Number

How many times to retry if pnpm fails to fetch from the registry.

fetch-retry-factor​

• Default:10
• Type:Number

The exponential factor for retry backoff.

fetch-retry-mintimeout​

• Default:10000 (10 seconds)
• Type:Number

The minimum (base) timeout for retrying requests.

fetch-retry-maxtimeout​

• Default:60000 (1 minute)
• Type:Number

The maximum fallback timeout to ensure the retry factor does not make requeststoo long.

fetch-timeout​

• Default:60000 (1 minute)
• Type:Number

The maximum amount of time to wait for HTTP requests to complete.

Peer Dependency Settings​

auto-install-peers​

• Default:true
• Type:Boolean

Whentrue, any missing non-optional peer dependencies are automatically installed.

Version Conflicts​

If there are conflicting version requirements for a peer dependency from different packages, pnpm will not install any version of the conflicting peer dependency automatically. Instead, a warning is printed. For example, if one dependency requiresreact@^16.0.0 and another requiresreact@^17.0.0, these requirements conflict, and no automatic installation will occur.

Conflict Resolution​

In case of a version conflict, you'll need to evaluate which version of the peer dependency to install yourself, or update the dependencies to align their peer dependency requirements.

dedupe-peer-dependents​

• Default:true
• Type:Boolean

When this setting is set totrue, packages with peer dependencies will be deduplicated after peers resolution.

For instance, let's say we have a workspace with two projects and both of them havewebpack in their dependencies.webpack hasesbuild in its optional peer dependencies, and one of the projects hasesbuild in its dependencies. In this case, pnpm will link two instances ofwebpack to thenode_modules/.pnpm directory: one withesbuild and another one without it:

node_modules
  .pnpm
    webpack@1.0.0_esbuild@1.0.0
    webpack@1.0.0
project1
  node_modules
    webpack -> ../../node_modules/.pnpm/webpack@1.0.0/node_modules/webpack
project2
  node_modules
    webpack -> ../../node_modules/.pnpm/webpack@1.0.0_esbuild@1.0.0/node_modules/webpack
    esbuild

This makes sense becausewebpack is used in two projects, and one of the projects doesn't haveesbuild, so the two projects cannot share the same instance ofwebpack. However, this is not what most developers expect, especially since in a hoistednode_modules, there would only be one instance ofwebpack. Therefore, you may now use thededupe-peer-dependents setting to deduplicatewebpack when it has no conflicting peer dependencies (explanation at the end). In this case, if we setdedupe-peer-dependents totrue, both projects will use the samewebpack instance, which is the one that hasesbuild resolved:

node_modules
  .pnpm
    webpack@1.0.0_esbuild@1.0.0
project1
  node_modules
    webpack -> ../../node_modules/.pnpm/webpack@1.0.0_esbuild@1.0.0/node_modules/webpack
project2
  node_modules
    webpack -> ../../node_modules/.pnpm/webpack@1.0.0_esbuild@1.0.0/node_modules/webpack
    esbuild

What are conflicting peer dependencies? By conflicting peer dependencies we mean a scenario like the following one:

node_modules
  .pnpm
    webpack@1.0.0_react@16.0.0_esbuild@1.0.0
    webpack@1.0.0_react@17.0.0
project1
  node_modules
    webpack -> ../../node_modules/.pnpm/webpack@1.0.0/node_modules/webpack
    react (v17)
project2
  node_modules
    webpack -> ../../node_modules/.pnpm/webpack@1.0.0_esbuild@1.0.0/node_modules/webpack
    esbuild
    react (v16)

In this case, we cannot dedupewebpack aswebpack hasreact in its peer dependencies andreact is resolved from two different versions in the context of the two projects.

strict-peer-dependencies​

• Default:false
• Type:Boolean

If this is enabled, commands will fail if there is a missing or invalid peerdependency in the tree.

resolve-peers-from-workspace-root​

• Default:true
• Type:Boolean

When enabled, dependencies of the root workspace project are used to resolve peer dependencies of any projects in the workspace.It is a useful feature as you can install your peer dependencies only in the root of the workspace, and you can be sure that all projects in the workspace use the same versions of the peer dependencies.

CLI Settings​

[no-]color​

• Default:auto
• Type:auto,always,never

Controls colors in the output.

• auto - output uses colors when the standard output is a terminal or TTY.
• always - ignore the difference between terminals and pipes. You’ll rarelywant this; in most scenarios, if you want color codes in your redirectedoutput, you can instead pass a--color flag to the pnpm command to force itto use color codes. The default setting is almost always what you’ll want.
• never - turns off colors. This is the setting used by--no-color.

loglevel​

• Default:info
• Type:debug,info,warn,error

Any logs at or higher than the given level will be shown.You can instead pass--silent to turn off all output logs.

use-beta-cli​

• Default:false
• Type:Boolean

Experimental option that enables beta features of the CLI. This means that youmay get some changes to the CLI functionality that are breaking changes, orpotentially bugs.

recursive-install​

• Default:true
• Type:Boolean

If this is enabled, the primary behaviour ofpnpm install becomes that ofpnpm install -r, meaning the install is performed on all workspace orsubdirectory packages.

Else,pnpm install will exclusively build the package in the currentdirectory.

engine-strict​

• Default:false
• Type:Boolean

If this is enabled, pnpm will not install any package that claims to not becompatible with the current Node version.

Regardless of this configuration, installation will always fail if a project(not a dependency) specifies an incompatible version in itsengines field.

npm-path​

• Type:path

The location of the npm binary that pnpm uses for some actions, like publishing.

package-manager-strict​

• Default:true
• Type:Boolean

If this setting is disabled, pnpm will not fail if a different package manager is specified in thepackageManager field ofpackage.json. When enabled, only the package name is checked (since pnpm v9.2.0), so you can still run any version of pnpm regardless of the version specified in thepackageManager field.

Alternatively, you can disable this setting by setting theCOREPACK_ENABLE_STRICT environment variable to0.

package-manager-strict-version​

• Default:false
• Type:Boolean

When enabled, pnpm will fail if its version doesn't exactly match the version specified in thepackageManager field ofpackage.json.

manage-package-manager-versions​

• Default:true
• Type:Boolean

When enabled, pnpm will automatically download and run the version of pnpm specified in thepackageManager field ofpackage.json. This is the same field used by Corepack. 예시:

{
"packageManager":"pnpm@9.3.0"
}

빌드 설정​

ignore-scripts​

• Default:false
• Type:Boolean

Do not execute any scripts defined in the projectpackage.json and itsdependencies.

ignore-dep-scripts​

• Default:false
• Type:Boolean

Do not execute any scripts of the installed packages. Scripts of the projects are executed.

child-concurrency​

• Default:5
• Type:Number

The maximum number of child processes to allocate simultaneously to buildnode_modules.

side-effects-cache​

• Default:true
• Type:Boolean

Use and cache the results of (pre/post)install hooks.

side-effects-cache-readonly​

• Default:false
• Type:Boolean

Only use the side effects cache if present, do not create it for new packages.

unsafe-perm​

• Default:false IF running as root, ELSEtrue
• Type:Boolean

Set to true to enable UID/GID switching when running package scripts.If set explicitly to false, then installing as a non-root user will fail.

node-options​

• Default:NULL
• Type:String

Options to pass through to Node.js via theNODE_OPTIONS environment variable. This does not impact how pnpm itself is executed but it does impact how lifecycle scripts are called.

verify-deps-before-run​

• Default:false
• Type:install,warn,error,prompt,false

This setting allows the checking of the state of dependencies before running scripts. The check runs onpnpm run andpnpm exec commands. The following values are supported:

• install - Automatically runs install ifnode_modules is not up to date.
• warn - Prints a warning ifnode_modules is not up to date.
• prompt - Prompts the user for permission to run install ifnode_modules is not up to date.
• error - Throws an error ifnode_modules is not up to date.
• false - Disables dependency checks.

strict-dep-builds​

Added in: v10.3.0

• Default:false
• Type:Boolean

Whenstrict-dep-builds is enabled, the installation will exit with a non-zero exit code if any dependencies have unreviewed build scripts (aka postinstall scripts).

Node.js Settings​

use-node-version​

• Default:undefined
• Type:semver

Specifies which exact Node.js version should be used for the project's runtime.pnpm will automatically install the specified version of Node.js and use it forrunningpnpm run commands or thepnpm node command.

This may be used instead of.nvmrc andnvm. Instead of the following.nvmrc file:

16.16.0

Use this.npmrc file:

use-node-version=16.16.0

This setting works only in a.npmrc file that is in the root of your workspace. If you need to specify a custom Node.js for a project in the workspace, use thepnpm.executionEnv.nodeVersion field ofpackage.json instead.

node-version​

• Default: the value returned bynode -v, without the v prefix
• Type:semver

The Node.js version to use when checking a package'sengines setting.

If you want to prevent contributors of your project from adding new incompatible dependencies, usenode-version andengine-strict in a.npmrc file at the root of the project:

node-version=12.22.0
engine-strict=true

This way, even if someone is using Node.js v16, they will not be able to install a new dependency that doesn't support Node.js v12.22.0.

node-mirror:<releaseDir>​

• Default:https://nodejs.org/download/<releaseDir>/
• Type:URL

Sets the base URL for downloading Node.js. The<releaseDir> portion of this setting can be any directory fromhttps://nodejs.org/download:release,rc,nightly,v8-canary, etc.

Here is how pnpm may be configured to download Node.js from Node.js mirror in China:

node-mirror:release=https://npmmirror.com/mirrors/node/
node-mirror:rc=https://npmmirror.com/mirrors/node-rc/
node-mirror:nightly=https://npmmirror.com/mirrors/node-nightly/

Workspace Settings​

link-workspace-packages​

• Default:false
• Type:true,false,deep

If this is enabled, locally available packages are linked tonode_modulesinstead of being downloaded from the registry. This is very convenient in amonorepo. If you need local packages to also be linked to subdependencies, youcan use thedeep setting.

Else, packages are downloaded and installed from the registry. However,workspace packages can still be linked by using theworkspace: range protocol.

inject-workspace-packages​

• Default:false
• Type:Boolean

Enables hard-linking of all local workspace dependencies instead of symlinking them. Alternatively, this can be achieved usingdependenciesMeta[].injected, which allows to selectively enable hard-linking for specific dependencies.

sync-injected-deps-after-scripts​

Added in: v10.5.0

• Default:undefined
• Type:String[]

Injected workspace dependencies are collections of hardlinks, which don't add or remove the files when their sources change. This causes problems in packages that need to be built (such as in TypeScript projects).

This setting is a list of script names. When any of these scripts are executed in a workspace package, the injected dependencies insidenode_modules will also be synchronized.

prefer-workspace-packages​

• Default:false
• Type:Boolean

If this is enabled, local packages from the workspace are preferred overpackages from the registry, even if there is a newer version of the package inthe registry.

This setting is only useful if the workspace doesn't usesave-workspace-protocol.

shared-workspace-lockfile​

• Default:true
• Type:Boolean

If this is enabled, pnpm creates a singlepnpm-lock.yaml file in the root ofthe workspace. This also means that all dependencies of workspace packages willbe in a singlenode_modules (and get symlinked to their packagenode_modulesfolder for Node's module resolution).

Advantages of this option:

• every dependency is a singleton
• faster installations in a monorepo
• fewer changes in code reviews as they are all in one file

save-workspace-protocol​

• Default:rolling
• Type:true,false,rolling

This setting controls how dependencies that are linked from the workspace are added topackage.json.

Iffoo@1.0.0 is in the workspace and you runpnpm add foo in another project of the workspace, below is howfoo will be added to the dependencies field. Thesave-prefix setting also influences how the spec is created.

include-workspace-root​

• Default:false
• Type:Boolean

When executing commands recursively in a workspace, execute them on the root workspace project as well.

ignore-workspace-cycles​

• Default:false
• Type:Boolean

When set totrue, no workspace cycle warnings will be printed.

disallow-workspace-cycles​

• Default:false
• Type:Boolean

When set totrue, installation will fail if the workspace has cycles.

Deploy Settings​

force-legacy-deploy​

• Default:false
• Type:Boolean

By default,pnpm deploy will try creating a dedicated lockfile from a shared lockfile for deployment. If this setting is set totrue, the legacydeploy behavior will be used.

Other Settings​

save-prefix​

• Default:'^'
• Type:'^','~',''

Configure how versions of packages installed to apackage.json file getprefixed.

For example, if a package has version1.2.3, by default its version is set to^1.2.3 which allows minor upgrades for that package, but afterpnpm config set save-prefix='~' it would be set to~1.2.3 which only allowspatch upgrades.

This setting is ignored when the added package has a range specified. Forinstance,pnpm add foo@2 will set the version offoo inpackage.json to2, regardless of the value ofsave-prefix.

tag​

• Default:latest
• Type:String

If youpnpm add a package and you don't provide a specific version, then itwill install the package at the version registered under the tag from thissetting.

This also sets the tag that is added to thepackage@version specified by thepnpm tag command if no explicit tag is given.

global-dir​

• 기본값:
  • If the$XDG_DATA_HOME env variable is set, then$XDG_DATA_HOME/pnpm/global
  • On Windows:~/AppData/Local/pnpm/global
  • On macOS:~/Library/pnpm/global
  • On Linux:~/.local/share/pnpm/global
• Type:path

Specify a custom directory to store global packages.

global-bin-dir​

• 기본값:
  • If the$XDG_DATA_HOME env variable is set, then$XDG_DATA_HOME/pnpm
  • On Windows:~/AppData/Local/pnpm
  • On macOS:~/Library/pnpm
  • On Linux:~/.local/share/pnpm
• Type:path

Allows to set the target directory for the bin files of globally installed packages.

state-dir​

• 기본값:
  • If the$XDG_STATE_HOME env variable is set, then$XDG_STATE_HOME/pnpm
  • On Windows:~/AppData/Local/pnpm-state
  • On macOS:~/.pnpm-state
  • On Linux:~/.local/state/pnpm
• Type:path

The directory where pnpm creates thepnpm-state.json file that is currently used only by the update checker.

cache-dir​

• 기본값:
  • If the$XDG_CACHE_HOME env variable is set, then$XDG_CACHE_HOME/pnpm
  • On Windows:~/AppData/Local/pnpm-cache
  • On macOS:~/Library/Caches/pnpm
  • On Linux:~/.cache/pnpm
• Type:path

The location of the cache (package metadata and dlx).

use-stderr​

• Default:false
• Type:Boolean

When true, all the output is written to stderr.

update-notifier​

• Default:true
• Type:Boolean

Set tofalse to suppress the update notification when using an older version of pnpm than the latest.

prefer-symlinked-executables​

• Default:true, whennode-linker is set tohoisted and the system is POSIX
• Type:Boolean

Create symlinks to executables innode_modules/.bin instead of command shims. This setting is ignored on Windows, where only command shims work.

ignore-compatibility-db​

• Default:false
• Type:Boolean

During installation the dependencies of some packages are automatically patched. If you want to disable this, set this config tofalse.

The patches are applied from Yarn's@yarnpkg/extensions package.

resolution-mode​

• Default:highest (waslowest-direct from v8.0.0 to v8.6.12)
• Type:highest,time-based,lowest-direct

Whenresolution-mode is set totime-based, dependencies will be resolved the following way:

1. Direct dependencies will be resolved to their lowest versions. So if there isfoo@^1.1.0 in the dependencies, then1.1.0 will be installed.
2. Subdependencies will be resolved from versions that were published before the last direct dependency was published.

With this resolution mode installations with warm cache are faster. It also reduces the chance of subdependency hijacking as subdependencies will be updated only if direct dependencies are updated.

This resolution mode works only with npm'sfull metadata. So it is slower in some scenarios. However, if you useVerdaccio v5.15.1 or newer, you may set theregistry-supports-time-field setting totrue, and it will be really fast.

Whenresolution-mode is set tolowest-direct, direct dependencies will be resolved to their lowest versions.

registry-supports-time-field​

• Default:false
• Type:Boolean

Set this totrue if the registry that you are using returns the "time" field in the abbreviated metadata. As of now, onlyVerdaccio from v5.15.1 supports this.

extend-node-path​

• Default:true
• Type:Boolean

Whenfalse, theNODE_PATH environment variable is not set in the command shims.

deploy-all-files​

• Default:false
• Type:Boolean

When deploying a package or installing a local package, all files of the package are copied. By default, if the package has a"files" field in thepackage.json, then only the listed files and directories are copied.

dedupe-direct-deps​

• Default:false
• Type:Boolean

When set totrue, dependencies that are already symlinked to the rootnode_modules directory of the workspace will not be symlinked to subprojectnode_modules directories.

dedupe-injected-deps​

• Default:true
• Type:Boolean

When this setting is enabled,dependencies that are injected will be symlinked from the workspace whenever possible. If the dependent project and the injected dependency reference the same peer dependencies, then it is not necessary to physically copy the injected dependency into the dependent'snode_modules; a symlink is sufficient.

optimistic-repeat-install​

Added in: v10.1.0

• Default:true
• Type:Boolean

When enabled, a fast check will be performed before proceeding to installation. This way a repeat install or an install on a project with everything up-to-date becomes a lot faster.