feature - Perl pragma to enable new features
use feature qw(say switch);given ($foo) { when (1) { say "\$foo == 1" } when ([2,3]) { say "\$foo == 2 || \$foo == 3" } when (/^a[bc]d$/) { say "\$foo eq 'abd' || \$foo eq 'acd'" } when ($_ > 100) { say "\$foo > 100" } default { say "None of the above" }}use feature ':5.10'; # loads all features available in perl 5.10use v5.10; # implicitly loads :5.10 feature bundleIt is usually impossible to add new syntax to Perl without breaking some existing programs. This pragma provides a way to minimize that risk. New syntactic constructs, or new semantic meanings to older constructs, can be enabled byuse feature 'foo', and will be parsed only when the appropriate feature pragma is in scope. (Nevertheless, theCORE:: prefix provides access to all Perl keywords, regardless of this pragma.)
Like other pragmas (use strict, for example), features have a lexical effect.use feature qw(foo) will only make the feature "foo" available from that point to the end of the enclosing block.
{ use feature 'say'; say "say is available here";}print "But not here.\n";no featureFeatures can also be turned off by usingno feature "foo". This too has lexical effect.
use feature 'say';say "say is available here";{ no feature 'say'; print "But not here.\n";}say "Yet it is here.";no feature with no features specified will reset to the default group. To disableall features (an unusual request!) useno feature ':all'.
use feature 'say' tells the compiler to enable the Perl 6 stylesay function.
See"say" in perlfunc for details.
This feature is available starting with Perl 5.10.
use feature 'state' tells the compiler to enablestate variables.
See"Persistent Private Variables" in perlsub for details.
This feature is available starting with Perl 5.10.
WARNING: Because thesmartmatch operator is experimental, Perl will warn when you use this feature, unless you have explicitly disabled the warning:
no warnings "experimental::smartmatch";use feature 'switch' tells the compiler to enable the Perl 6 given/when construct.
See"Switch Statements" in perlsyn for details.
This feature is available starting with Perl 5.10.
use feature 'unicode_strings' tells the compiler to use Unicode rules in all string operations executed within its scope (unless they are also within the scope of eitheruse locale oruse bytes). The same applies to all regular expressions compiled within the scope, even if executed outside it. It does not change the internal representation of strings, but only how they are interpreted.
no feature 'unicode_strings' tells the compiler to use the traditional Perl rules wherein the native character set rules is used unless it is clear to Perl that Unicode is desired. This can lead to some surprises when the behavior suddenly changes. (See"The "Unicode Bug"" in perlunicode for details.) For this reason, if you are potentially using Unicode in your program, theuse feature 'unicode_strings' subpragma isstrongly recommended.
This feature is available starting with Perl 5.12; was almost fully implemented in Perl 5.14; and extended in Perl 5.16 to coverquotemeta.
Under theunicode_eval feature, Perl'seval function, when passed a string, will evaluate it as a string of characters, ignoring anyuse utf8 declarations.use utf8 exists to declare the encoding of the script, which only makes sense for a stream of bytes, not a string of characters. Source filters are forbidden, as they also really only make sense on strings of bytes. Any attempt to activate a source filter will result in an error.
Theevalbytes feature enables theevalbytes keyword, which evaluates the argument passed to it as a string of bytes. It dies if the string contains any characters outside the 8-bit range. Source filters work withinevalbytes: they apply to the contents of the string being evaluated.
Together, these two features are intended to replace the historicaleval function, which has (at least) two bugs in it, that cannot easily be fixed without breaking existing programs:
eval behaves differently depending on the internal encoding of the string, sometimes treating its argument as a string of bytes, and sometimes as a string of characters.
Source filters activated withineval leak out into whicheverfile scope is currently being compiled. To give an example with the CPAN moduleSemi::Semicolons:
BEGIN { eval "use Semi::Semicolons; # not filtered here " }# filtered here!evalbytes fixes that to work the way one would expect:
use feature "evalbytes";BEGIN { evalbytes "use Semi::Semicolons; # filtered " }# not filteredThese two features are available starting with Perl 5.16.
This provides the__SUB__ token that returns a reference to the current subroutine orundef outside of a subroutine.
This feature is available starting with Perl 5.16.
This feature supports the legacy$[ variable. See"$[" in perlvar andarybase. It is on by default but disabled underuse v5.16 (see"IMPLICIT LOADING", below).
This feature is available under this name starting with Perl 5.16. In previous versions, it was simply on all the time, and this pragma knew nothing about it.
use feature 'fc' tells the compiler to enable thefc function, which implements Unicode casefolding.
See"fc" in perlfunc for details.
This feature is available from Perl 5.16 onwards.
WARNING: This feature is still experimental and the implementation may change in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:
no warnings "experimental::lexical_subs";This enables declaration of subroutines viamy sub foo,state sub foo andour sub foo syntax. See"Lexical Subroutines" in perlsub for details.
This feature is available from Perl 5.18 onwards.
WARNING: This feature is still experimental and the implementation may change in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:
no warnings "experimental::postderef";The 'postderef' feature allows the use ofpostfix dereference syntax. For example, it will make the following two statements equivalent:
my @x = @{ $h->{a} };my @x = $h->{a}->@*;The 'postderef_qq' feature extends this, for array and scalar dereference, to working inside of double-quotish interpolations.
This feature is available from Perl 5.20 onwards.
WARNING: This feature is still experimental and the implementation may change in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:
no warnings "experimental::signatures";This enables unpacking of subroutine arguments into lexical variables by syntax such as
sub foo ($left, $right) {return $left + $right; }See"Signatures" in perlsub for details.
This feature is available from Perl 5.20 onwards.
WARNING: This feature is still experimental and the implementation may change in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:
no warnings "experimental::refaliasing";This enables aliasing via assignment to references:
\$a = \$b; # $a and $b now point to the same scalar\@a = \@b; # to the same array\%a = \%b;\&a = \&b;foreach \%hash (@array_of_hash_refs) { ...}See"Assigning to References" in perlref for details.
This feature is available from Perl 5.22 onwards.
WARNING: This feature is still experimental and the implementation may change in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:
no warnings "experimental::bitwise";This makes the four standard bitwise operators (& | ^ ~) treat their operands consistently as numbers, and introduces four new dotted operators (&. |. ^. ~.) that treat their operands consistently as strings. The same applies to the assignment variants (&= |= ^= &.= |.= ^.=).
See"Bitwise String Operators" in perlop for details.
This feature is available from Perl 5.22 onwards.
It's possible to load multiple features together, using afeature bundle. The name of a feature bundle is prefixed with a colon, to distinguish it from an actual feature.
use feature ":5.10";The following feature bundles are available:
bundle features included--------- -----------------:default array_base:5.10 say state switch array_base:5.12 say state switch unicode_strings array_base:5.14 say state switch unicode_strings array_base:5.16 say state switch unicode_strings unicode_eval evalbytes current_sub fc:5.18 say state switch unicode_strings unicode_eval evalbytes current_sub fc:5.20 say state switch unicode_strings unicode_eval evalbytes current_sub fc:5.22 say state switch unicode_strings unicode_eval evalbytes current_sub fcThe:default bundle represents the feature set that is enabled before anyuse feature orno feature declaration.
Specifying sub-versions such as the0 in5.14.0 in feature bundles has no effect. Feature bundles are guaranteed to be the same for all sub-versions.
use feature ":5.14.0"; # same as ":5.14"use feature ":5.14.1"; # same as ":5.14"Instead of loading feature bundles by name, it is easier to let Perl do implicit loading of a feature bundle for you.
There are two ways to load thefeature pragma implicitly:
By using the-E switch on the Perl command-line instead of-e. That will enable the feature bundle for that version of Perl in the main compilation unit (that is, the one-liner that follows-E).
By explicitly requiring a minimum Perl version number for your program, with theuse VERSION construct. That is,
use v5.10.0;will do an implicit
no feature ':all';use feature ':5.10';and so on. Note how the trailing sub-version is automatically stripped from the version.
But to avoid portability warnings (see"use" in perlfunc), you may prefer:
use 5.010;with the same effect.
If the required version is older than Perl 5.10, the ":default" feature bundle is automatically loaded instead.
Perldoc Browser is maintained by Dan Book (DBOOK). Please contact him via theGitHub issue tracker oremail regarding any issues with the site itself, search, or rendering of documentation.
The Perl documentation is maintained by the Perl 5 Porters in the development of Perl. Please contact them via thePerl issue tracker, themailing list, orIRC to report any issues with the contents or format of the documentation.