Pod::Checker, podchecker() - check pod documents for syntax errors
use Pod::Checker;$syntax_okay = podchecker($filepath, $outputpath, %options);my $checker = new Pod::Checker %options;$checker->parse_from_file($filepath, \*STDERR);$filepath is the input POD to read and$outputpath is where to write POD syntax error messages. Either argument may be a scalar indicating a file-path, or else a reference to an open filehandle. If unspecified, the input-file it defaults to\*STDIN, and the output-file defaults to\*STDERR.
This function can take a hash of options:
Turn warnings on/off.val is usually 1 for on, but higher values trigger additional warnings. See"Warnings".
podchecker will perform syntax checking of Perl5 POD format documentation.
Curious/ambitious users are welcome to propose additional features they wish to see inPod::Checker andpodchecker and verify that the checks are consistent withperlpod.
The following checks are currently performed:
Unknown '=xxxx' commands, unknown 'X<...>' interior-sequences, and unterminated interior sequences.
Check for proper balancing of=begin and=end. The contents of such a block are generally ignored, i.e. no syntax checks are performed.
Check for proper nesting and balancing of=over,=item and=back.
Check for same nested interior-sequences (e.g.L<...L<...>...>).
Check for malformed or non-existing entitiesE<...>.
Check for correct syntax of hyperlinksL<...>. Seeperlpod for details.
Check for unresolved document-internal links. This check may also reveal misspelled links that seem to be internal links but should be links to something else.
empty =headn
A heading (=head1 or=head2) without any text? That ain't no heading!
=over on lineN without closing =back
The=over command does not have a corresponding=back before the next heading (=head1 or=head2) or the end of the file.
=item without previous =over
=back without previous =over
An=item or=back command has been found outside a=over/=back block.
No argument for =begin
A=begin command was found that is not followed by the formatter specification.
=end without =begin
A standalone=end command was found.
Nested =begin's
There were at least two consecutive=begin commands without the corresponding=end. Only one=begin may be active at a time.
=for without formatter specification
There is no specification of the formatter after the=for command.
unresolved internal linkNAME
The given link toNAME does not have a matching node in the current POD. This also happened when a single word node name is not enclosed in"".
Unknown command "CMD"
An invalid POD command has been found. Valid are=head1,=head2,=head3,=head4,=over,=item,=back,=begin,=end,=for,=pod,=cut
Unknown interior-sequence "SEQ"
An invalid markup command has been encountered. Valid are:B<>,C<>,E<>,F<>,I<>,L<>,S<>,X<>,Z<>
nested commandsCMD<...CMD<...>...>
Two nested identical markup commands have been found. Generally this does not make sense.
garbled entitySTRING
TheSTRING found cannot be interpreted as a character entity.
Entity number out of range
An entity specified by number (dec, hex, oct) is out of range (1-255).
malformed link L<>
The link found cannot be parsed because it does not conform to the syntax described inperlpod.
nonempty Z<>
TheZ<> sequence is supposed to be empty.
empty X<>
The index entry specified contains nothing but whitespace.
Spurious text after =pod / =cut
The commands=pod and=cut do not take any arguments.
Spurious character(s) after =back
The=back command does not take any arguments.
These may not necessarily cause trouble, but indicate mediocre style.
multiple occurrence of link targetname
The POD file has some=item and/or=head commands that have the same text. Potential hyperlinks to such a text cannot be unique then. This warning is printed only with warning level greater than one.
line containing nothing but whitespace in paragraph
There is some whitespace on a seemingly empty line. POD is very sensitive to such things, so this is flagged.vi users switch on thelist option to avoid this problem.
previous =item has no contents
There is a list=item right above the flagged line that has no text contents. You probably want to delete empty items.
preceding non-item paragraph(s)
A list introduced by=over starts with a text or verbatim paragraph, but continues with=items. Move the non-item paragraph out of the=over/=back block.
=item type mismatch (one vs.two)
A list started with e.g. a bullet-like=item and continued with a numbered one. This is obviously inconsistent. For most translators the type of thefirst=item determines the type of the list.
N unescaped<> in paragraph
Angle brackets not written as<lt> and<gt> can potentially cause errors as they could be misinterpreted as markup commands. This is only printed when the -warnings level is greater than 1.
Unknown entity
A character entity was found that does not belong to the standard ISO set or the POD specialsverbar andsol.
No items in =over
The list opened with=over does not contain any items.
No argument for =item
=item without any parameters is deprecated. It should either be followed by* to indicate an unordered list, by a number (optionally followed by a dot) to indicate an ordered (numbered) list or simple text for a definition list.
empty section in previous paragraph
The previous section (introduced by a=head command) does not contain any text. This usually indicates that something is missing. Note: A=head1 followed immediately by=head2 does not trigger this warning.
Verbatim paragraph in NAME section
The NAME section (=head1 NAME) should consist of a single paragraph with the script/module name, followed by a dash `-' and a very short description of what the thing is good for.
=headn without preceding higher level
For example if there is a=head2 in the POD file prior to a=head1.
There are some warnings with respect to malformed hyperlinks:
ignoring leading/trailing whitespace in link
There is whitespace at the beginning or the end of the contents of L<...>.
(section) in '$page' deprecated
There is a section detected in the page name of L<...>, e.g.L<passwd(2)>. POD hyperlinks may point to POD documents only. Please writeC<passwd(2)> instead. Some formatters are able to expand this to appropriate code. For links to (builtin) functions, please sayL<perlfunc/mkdir>, without ().
alternative text/node '%s' contains non-escaped | or /
The characters| and/ are special in the L<...> context. Although the hyperlink parser does its best to determine which "/" is text and which is a delimiter in case of doubt, one ought to escape these literal characters like this:
/ E<sol>| E<verbar>podchecker returns the number of POD syntax errors found or -1 if there were no POD commands at all found in the file.
See"SYNOPSIS"
While checking, this module collects document properties, e.g. the nodes for hyperlinks (=headX,=item) and index entries (X<>). POD translators can use this feature to syntax-check and get the nodes in a first pass before actually starting to convert. This is expensive in terms of execution time, but allows for very robust conversions.
Since PodParser-1.24 thePod::Checker module uses only thepoderror method to print errors and warnings. The summary output (e.g. "Pod syntax OK") has been dropped from the module and has been included inpodchecker (the script). This allows users ofPod::Checker to control completely the output behavior. Users ofpodchecker (the script) get the well-known behavior.
Pod::Checker->new( %options )Return a reference to a new Pod::Checker object that inherits from Pod::Parser and is used for calling the required methods later. The following options are recognized:
-warnings => num Print warnings ifnum is true. The higher the value ofnum, the more warnings are printed. Currently there are only levels 1 and 2.
-quiet => num Ifnum is true, do not print any errors/warnings. This is useful when Pod::Checker is used to munge POD code into plain text from within POD formatters.
$checker->poderror( @args )$checker->poderror( {%opts}, @args )Internal method for printing errors and warnings. If no options are given, simply prints "@_". The following options are recognized and used to form the output:
-msgA message to print prior to@args.
-lineThe line number the error occurred in.
-fileThe file (name) the error occurred in.
-severityThe error level, should be 'WARNING' or 'ERROR'.
$checker->num_errors()Set (if argument specified) and retrieve the number of errors found.
$checker->num_warnings()Set (if argument specified) and retrieve the number of warnings found.
$checker->name()Set (if argument specified) and retrieve the canonical name of POD as found in the=head1 NAME section.
$checker->node()Add (if argument specified) and retrieve the nodes (as defined by=headX and=item) of the current POD. The nodes are returned in the order of their occurrence. They consist of plain text, each piece of whitespace is collapsed to a single blank.
$checker->idx()Add (if argument specified) and retrieve the index entries (as defined byX<>) of the current POD. They consist of plain text, each piece of whitespace is collapsed to a single blank.
$checker->hyperlink()Add (if argument specified) and retrieve the hyperlinks (as defined byL<>) of the current POD. They consist of a 2-item array: line number andPod::Hyperlink object.
Please report bugs usinghttp://rt.cpan.org.
Brad Appleton <bradapp@enteract.com> (initial version), Marek Rouchal <marekr@cpan.org>
Based on code forPod::Text::pod2text() written by Tom Christiansen <tchrist@mox.perl.com>
Perldoc Browser is maintained by Dan Book (DBOOK). Please contact him via theGitHub issue tracker oremail regarding any issues with the site itself, search, or rendering of documentation.
The Perl documentation is maintained by the Perl 5 Porters in the development of Perl. Please contact them via thePerl issue tracker, themailing list, orIRC to report any issues with the contents or format of the documentation.