Kovalchuk et al., 2024
ViewHTML| Publication | Publication Date | Title |
|---|---|---|
| Hippler et al. | Angular dependence of plasma parameters and film properties during high power impulse magnetron sputtering for deposition of Ti and TiO2 layers | |
| Priyadarshini et al. | Compact tool for deposition of composition spread alloy films | |
| JP2637509B2 (en) | Novel diamond-like carbon film and method for producing the same | |
| Mayr et al. | An (ultra) high-vacuum compatible sputter source for oxide thin film growth | |
| Kovalchuk et al. | Low power silicon evaporation source—Construction, performances, and applications | |
| Imashuku | In situ determination of sputtered Ni–Cu film composition from emission intensities | |
| Vesel et al. | Fundamentals of thin film depth profiling by glow discharge optical emission spectroscopy | |
| Veletas et al. | Bismuth surface segregation and disorder analysis of quaternary (Ga, In)(As, Bi)/InP alloys | |
| Methaapanon et al. | Portable atomic layer deposition reactor for in situ synchrotron photoemission studies | |
| Ramos et al. | Surface temperature of a 2 in. Ti target during DC magnetron sputtering | |
| Hasegawa et al. | Reduction of contact resistance at terminations of bismuth wire arrays | |
| Furlan et al. | Influence of substrate temperature and film thickness on thermal, electrical, and structural properties of HPPMS and DC magnetron sputtered Ge thin films | |
| Shrestha et al. | Combination of thermal and electric properties’ measurement techniques in a single setup suitable for radioactive materials in controlled environments and based on the 3ω approach | |
| Pieper et al. | Versatile system for the temperature-controlled preparation of oxide crystal surfaces | |
| Annese et al. | Ultrahigh-vacuum organic molecular-beam deposition system for in situ growth and characterization | |
| Kakati et al. | Effect of oxygen on the characteristics of radio frequency planar magnetron sputtering plasma used for aluminum oxide deposition | |
| Reguer et al. | Structural and electrical studies of conductive nanowires prepared by focused ion beam induced deposition | |
| Kusaba et al. | A new emissive-probe method for electron temperature measurement in radio-frequency plasmas | |
| Oka et al. | Leveraging oxide reactive sputtering for thermal insulation in laser-heated diamond anvil cell | |
| Okamoto et al. | Thermal conductivity measurement of Si/(Ge+ Au) artificial superlattice thin film | |
| Welzel et al. | Patterned anvils for high pressure measurements at low temperature | |
| Levesque et al. | Double sublimation system to deposit molecules from solid organic compounds onto a cryogenic substrate: Thymine on solid argon | |
| Laws Calley et al. | In situ Auger probe enabling epitaxy composition control of alloys by elemental surface analysis | |
| Hemmi et al. | Low cost photoelectron yield setup for surface process monitoring | |
| Kang et al. | Assessing the thermal conductivity of non-uniform thin-films: Nanocrystalline Cu composites incorporating carbon nanotubes |