| US99528A (en) | | 1870-02-08 | | Francis b |
| US113634A (en) | | 1871-04-11 | | Improvement in metallic cartridges |
| US130679A (en) | | 1872-08-20 | | Signor to himself and alfred a |
| US159665A (en) | | 1875-02-09 | | Improvement in metallic cartridges |
| US169807A (en) | | 1875-11-09 | | N cartridges |
| US207248A (en) | | 1878-08-20 | | Improvement in cartridges for fire-arms |
| US462611A (en) | | 1891-11-03 | | Pijskre ambjorx comte de sparre |
| US475008A (en) | | 1892-05-17 | | Cartridge |
| US498857A (en) | | 1893-06-06 | | Cartridge |
| US498856A (en) | | 1893-06-06 | | Cartridge-shell |
| DE16742C (en) | 1881-06-15 | 1882-01-11 | E. RlVE, Premier-Lieut. a. d. in Porta bei Minden | Devices on projectiles in order to set them in rotation through the opposing air resistance |
| US640856A (en) | 1899-07-03 | 1900-01-09 | Charles A Bailey | Cartridge. |
| US676000A (en) | 1899-07-18 | 1901-06-11 | Hermann Henneberg | Cartridge. |
| US662137A (en) | 1900-03-10 | 1900-11-20 | Winfred Castor | Combination gun-cartridge. |
| US743242A (en) | 1903-04-29 | 1903-11-03 | William C Bush | Gun-cartridge. |
| US905358A (en) | 1906-11-23 | 1908-12-01 | Peters Cartridge Company | Shell. |
| US865979A (en) | 1907-05-24 | 1907-09-10 | Best Ammunition Company | Cartridge. |
| US869046A (en) | 1907-08-06 | 1907-10-22 | Charles A Bailey | Cartridge. |
| US957171A (en) | 1908-12-14 | 1910-05-03 | Adam Loeb | Shell for cartridges. |
| US963911A (en) | 1909-10-27 | 1910-07-12 | Gottlob E Loeble | Cartridge. |
| US1060817A (en) | 1912-11-25 | 1913-05-06 | Western Cartridge Co | Cartridge. |
| US1060818A (en) | 1912-11-25 | 1913-05-06 | Western Cartridge Co | Cartridge. |
| US1064907A (en) | 1913-04-04 | 1913-06-17 | Union Metallic Cartridge Co | Paper-tube shot-shell. |
| US1187464A (en) | 1915-08-14 | 1916-06-13 | John W Offutt | Cartridge-case. |
| US1936905A (en) | 1931-10-12 | 1933-11-28 | Alonzo F Gaidos | Refillable shell for firearms |
| US1940657A (en) | 1933-01-28 | 1933-12-19 | Remington Arms Co Inc | Ammunition |
| US2294822A (en) | 1939-03-01 | 1942-09-01 | Albree George Norman | Cartridge |
| US2465962A (en) | 1945-04-28 | 1949-03-29 | Henry B Allen | Protection of bore surfaces of guns |
| US2654319A (en) | 1950-12-26 | 1953-10-06 | Jack W Roske | Sectional cartridge |
| US2823611A (en) | 1952-07-02 | 1958-02-18 | Richard P Thayer | Base for shell case |
| US2936709A (en) | 1952-12-16 | 1960-05-17 | Olin Mathieson | Ammunition |
| US2953990A (en) | 1953-12-11 | 1960-09-27 | Olin Mathieson | Ammunition |
| GB783023A (en) | 1954-09-04 | 1957-09-18 | Marcel Luc Amedee Paulve | Improvements in or relating to a method of making sporting cartridge cases having a synthetic body or bottom and cartridges obtained thereby |
| US2972947A (en) | 1954-09-30 | 1961-02-28 | Vincent G Fitzsimmons | Ammunition cartridge cases |
| US2918868A (en) | 1955-04-30 | 1959-12-29 | Ringdal Lars | Cartridge |
| US2862446A (en) | 1955-08-15 | 1958-12-02 | Kupag Kumststoff Patent Verwal | Cartridge |
| US3034433A (en) | 1958-11-03 | 1962-05-15 | Gronn Karl | Cartridge cases |
| US3099958A (en) | 1960-01-12 | 1963-08-06 | Remington Arms Co Inc | Firearm cartridges |
| US4173186A (en) | 1960-07-07 | 1979-11-06 | The United States Of America As Represented By The Secretary Of The Army | Ammunition |
| US3159701A (en) | 1960-12-12 | 1964-12-01 | George L Herter | Injection molding of plastic ammunition case |
| US3242789A (en) | 1962-04-02 | 1966-03-29 | Olin Mathieson | Method of making plastic cartridge case |
| US3170401A (en) | 1962-09-11 | 1965-02-23 | Walter T Johnson | Cartridge case |
| US3157121A (en) | 1963-04-05 | 1964-11-17 | Remington Arms Co Inc | Shotshell |
| US3288066A (en) | 1964-03-10 | 1966-11-29 | Dynamit Nobel Ag | Cartridge case |
| FR1412414A (en) | 1964-03-27 | 1965-10-01 | Gevelot Sa | Shooting cartridge |
| US3292538A (en) | 1964-04-18 | 1966-12-20 | Dynamit Nobel Ag | Practice ammunition |
| US3171350A (en) | 1964-04-27 | 1965-03-02 | Olin Mathieson | Biaxially oriented plastic shotshell |
| US3256815A (en) | 1964-08-19 | 1966-06-21 | John K Davidson | Shotgun shells |
| US3332352A (en) | 1965-11-24 | 1967-07-25 | Remington Arms Co Inc | Coating for plastic shotshells |
| US3446146A (en) | 1965-12-28 | 1969-05-27 | Dynamit Nobel Ag | Artillery cartridge |
| US3444777A (en) | 1967-03-20 | 1969-05-20 | Frederick A Lage | Method for loading a shot shell |
| US3485170A (en) | 1967-11-29 | 1969-12-23 | Remington Arms Co Inc | Expendable case ammunition |
| US3485173A (en) | 1968-02-06 | 1969-12-23 | Us Army | Variable centroid projectile |
| US3491691A (en) | 1968-03-07 | 1970-01-27 | Vawter Ammunition Inc | Shell casing and its method of manufacture |
| US3565008A (en) | 1968-06-26 | 1971-02-23 | Olin Mathieson | Plastic shotshell and method |
| US3590740A (en) | 1968-11-12 | 1971-07-06 | Herter Inc S | Plastic shot shell and base wad |
| US3690256A (en) | 1969-02-01 | 1972-09-12 | Oskar Schnitzer | Cartridge case |
| US3614929A (en) | 1969-04-21 | 1971-10-26 | Herter Inc S | Plastic shotgun shell |
| US3609904A (en) | 1969-05-07 | 1971-10-05 | Remington Arms Co Inc | Extractable plastic cartridge |
| US3756156A (en) | 1969-12-02 | 1973-09-04 | Dynamit Nobel Ag | Bottom wad for cartridge cases, especially shot cartridge cases |
| US3659528A (en) | 1969-12-24 | 1972-05-02 | Texas Instruments Inc | Composite metal cartridge case |
| US3688699A (en) | 1970-01-12 | 1972-09-05 | Federal Cartridge Corp | Self-retaining reload capsule for shotgun shells |
| US3745924A (en) | 1970-03-30 | 1973-07-17 | Remington Arms Co Inc | Plastic cartridge case |
| US3866536A (en) | 1970-11-12 | 1975-02-18 | Albert J Greenberg | Controlled expansion projectile |
| US3749021A (en) | 1970-12-18 | 1973-07-31 | Gulf & Western Ind Prod Co | Metal coated plastic cartridge case and method of manufacture |
| US3768413A (en) | 1972-03-10 | 1973-10-30 | Olin Corp | Electric and impact primer |
| US3797396A (en) | 1972-03-15 | 1974-03-19 | Us Army | Reinforced lightweight cartridge |
| US3765297A (en) | 1972-06-06 | 1973-10-16 | Us Army | Non-eroding, lightweight cartridge cases |
| US3874294A (en) | 1973-01-02 | 1975-04-01 | Remington Arms Co Inc | Plastic cartridge case for high pressure center fire ammunition having multi-component stamped metal head |
| US3955506A (en) | 1973-01-26 | 1976-05-11 | Rheinmetall G.M.B.H. | Propulsive-charge case |
| US3842739A (en) | 1973-05-31 | 1974-10-22 | Remington Arms Co Inc | Metallic mouth for a plastic cartridge case |
| US3977326A (en) | 1975-02-06 | 1976-08-31 | Remington Arms Company, Inc. | Composite cartridge casing and method of assembly |
| US3990366A (en) | 1975-02-06 | 1976-11-09 | Remington Arms Company, Inc. | Composite ammunition casing with forward metallic portion |
| US4005630A (en) | 1975-02-25 | 1977-02-01 | Nathan A. Adler | Apparatus for separating a bullet from a cartridge case |
| US4020763A (en) | 1975-04-29 | 1977-05-03 | Antonio Iruretagoyena | Cartridge construction |
| US4157684A (en) | 1975-09-23 | 1979-06-12 | Clausser Karl C | Safety filler for underloaded firearm cartridge |
| US4147107A (en) | 1976-02-17 | 1979-04-03 | Kupag Kunststoff-Patent-Verwaltungs Ag | Ammunition cartridge |
| US4132173A (en) | 1976-05-08 | 1979-01-02 | Ziger, S.A. | Cartridge case assembly |
| US4187271A (en) | 1977-04-18 | 1980-02-05 | Owens-Corning Fiberglas Corporation | Method of making same |
| US4179992A (en) | 1978-04-04 | 1979-12-25 | The United States Of America As Represented By The Secretary Of The Army | Primer-igniter for gun propellants |
| US4353304A (en) | 1978-07-27 | 1982-10-12 | Dynamit Nobel Aktiengesellschaft | Propellant charge igniter |
| US4276830A (en) | 1979-01-16 | 1981-07-07 | Pastora Alice Julio C | Cartridge case |
| US4228724A (en) | 1979-05-29 | 1980-10-21 | Leich Robert A | Ammunition loader |
| US4483251A (en) | 1981-11-05 | 1984-11-20 | Don Spalding | Cartridge for small arms |
| US4719859A (en) | 1982-10-15 | 1988-01-19 | Dynamit Nobel Aktiengesellschaft | Training cartridge |
| US4475435A (en) | 1983-02-25 | 1984-10-09 | Mantel Machine Products, Inc. | In line bullet feeder |
| US4614157A (en) | 1983-07-05 | 1986-09-30 | Olin Corporation | Plastic cartridge case |
| US4679505A (en) | 1984-11-30 | 1987-07-14 | Federal Cartridge Corporation | 00 buckshot shotshell |
| US4598445A (en) | 1985-01-02 | 1986-07-08 | Johnel M. O'Connor | Two component cartridge case and method of assembly |
| US4763576A (en) | 1985-03-08 | 1988-08-16 | Angus Chemical Company | Detonating energy transmittal device |
| US4726296A (en) | 1985-04-22 | 1988-02-23 | Action Manufacturing Company | Stress modulator ring and microgrooved base for an ammunition cartridge having a plastic case |
| US4718348A (en) | 1986-05-16 | 1988-01-12 | Ferrigno John E | Grooved projectiles |
| US4867065A (en) | 1987-09-19 | 1989-09-19 | Rheinmetal Gmbh | Training cartridge |
| US5033386A (en) | 1988-02-09 | 1991-07-23 | Vatsvog Marlo K | Composite cartridge for high velocity rifles and the like |
| US5151555A (en) | 1988-02-09 | 1992-09-29 | Vatsvog Marlo K | Composite cartridge for high velocity rifles and the like |
| US5259288A (en) | 1988-02-09 | 1993-11-09 | Vatsvog Marlo K | Pressure regulating composite cartridge |
| US5021206A (en) | 1988-12-12 | 1991-06-04 | Olin Corporation | Method of molding a dual plastic shotshell casing |
| US4970959A (en) | 1989-08-15 | 1990-11-20 | Olin Corporation | Collapsible basewad |
| US5063853A (en) | 1990-02-27 | 1991-11-12 | Steyr-Daimler-Puch Ag | Cartridge case |
| US5090327A (en) | 1990-02-27 | 1992-02-25 | Steyr-Daimler-Puch Ag | Cartridge with flash tube |
| US5247888A (en) | 1990-06-25 | 1993-09-28 | Societe Nationale Des Poudres Et Explosifs | Semi combustible cartridge |
| US5127331A (en) | 1991-03-25 | 1992-07-07 | Olin Corporation | Reduced recoil compression formed shotshell casing |
| US5265540A (en) | 1991-07-31 | 1993-11-30 | Giat Industries | Ammunition, in particular of the telescoped type |
| US6004682A (en) | 1991-09-09 | 1999-12-21 | Avery Dennison Corporation | In-mold label film and method |
| US5165040A (en) | 1991-12-23 | 1992-11-17 | General Dynamics Corp., Air Defense Systems Division | Pre-stressed cartridge case |
| US5237930A (en) | 1992-02-07 | 1993-08-24 | Snc Industrial Technologies, Inc. | Frangible practice ammunition |
| USD345676S (en) | 1992-07-06 | 1994-04-05 | Biffle John M | Cup holder |
| US5433148A (en) | 1993-03-12 | 1995-07-18 | Giat Industries | Casing for a telescoped-type munition |
| US5563365A (en) | 1993-08-09 | 1996-10-08 | The United States Of America As Represented By The Secretary Of The Army | Case base/combustible cartridge case joint |
| US5535495A (en) | 1994-11-03 | 1996-07-16 | Gutowski; Donald A. | Die cast bullet manufacturing process |
| US5961200A (en) | 1995-01-30 | 1999-10-05 | Friis; Mogens | Lamp for use in connection with an object storage system |
| US5616642A (en) | 1995-04-14 | 1997-04-01 | West; Harley L. | Lead-free frangible ammunition |
| US5679920A (en) | 1995-08-03 | 1997-10-21 | Federal Hoffman, Inc. | Non-toxic frangible bullet |
| US5770815A (en) | 1995-08-14 | 1998-06-23 | The United States Of America As Represented By The Secretary Of The Navy | Ammunition cartridge with reduced propellant charge |
| US5950063A (en) | 1995-09-07 | 1999-09-07 | Thermat Precision Technology, Inc. | Method of powder injection molding |
| USD380650S (en) | 1996-03-06 | 1997-07-08 | Norris Daniel A | Carrier for supporting a large drink cup in an automotive cup holder |
| US6257149B1 (en) | 1996-04-03 | 2001-07-10 | Cesaroni Technology, Inc. | Lead-free bullet |
| US6048379A (en) | 1996-06-28 | 2000-04-11 | Ideas To Market, L.P. | High density composite material |
| US5758445A (en) | 1996-07-16 | 1998-06-02 | Casull; Richard J. | Chamber for a firearm |
| US5979331A (en) | 1996-07-16 | 1999-11-09 | Casull; Richard J. | Cartridge for a firearm |
| US6257148B1 (en) | 1997-01-24 | 2001-07-10 | Patria Vammas Oy | Arrangement for supporting mortar shell into barrel |
| US5798478A (en) | 1997-04-16 | 1998-08-25 | Cove Corporation | Ammunition projectile having enhanced flight characteristics |
| US5969288A (en) | 1997-05-07 | 1999-10-19 | Cheddite France | Cartridge case, especially for a smooth bore gun |
| US6272993B1 (en) | 1997-12-11 | 2001-08-14 | R.A. Brands, Llc | Electric primer |
| US6070532A (en) | 1998-04-28 | 2000-06-06 | Olin Corporation | High accuracy projectile |
| US6523476B1 (en) | 1998-10-29 | 2003-02-25 | Dynamit Nobel Gmbh Explosivstoff Und Systemtechnik | Ammunition with a shell whose wall consists of combustible or consumable wound body |
| WO2000034732A1 (en) | 1998-12-08 | 2000-06-15 | Kay Clough Mark Hamilton | Ammunition |
| US6357357B1 (en) | 1999-01-05 | 2002-03-19 | Alliant Techsystems Inc. | Propulsion system |
| US6845716B2 (en) | 1999-01-15 | 2005-01-25 | Natec, Inc. | Ammunition articles with plastic components and method of making ammunition articles with plastic components |
| US6752084B1 (en) | 1999-01-15 | 2004-06-22 | Amtech, Inc. | Ammunition articles with plastic components and method of making ammunition articles with plastic components |
| US7441504B2 (en) | 1999-01-15 | 2008-10-28 | Development Capital Management Company | Base for a cartridge casing body for an ammunition article, a cartridge casing body and an ammunition article having such base, wherein the base is made from plastic, ceramic, or a composite material |
| US20050257712A1 (en) | 1999-01-15 | 2005-11-24 | Natec, Inc. | A base for a cartridge casing body for an ammunition article, a cartridge casing body and an ammunition article having such base, wherein the base is made from plastic, ceramic, or a composite material |
| US6460464B1 (en) | 1999-07-19 | 2002-10-08 | Henkel Loctite Corporation | Adhesive for ring seal in center fire ammunition |
| US20040200340A1 (en) | 1999-08-04 | 2004-10-14 | Robinson Peter W. | Slug for industrial ballistic tool |
| US6408764B1 (en) | 1999-09-16 | 2002-06-25 | Rheinmetall W & M Gmbh | Case base for large-caliber ammunition |
| US6708621B1 (en) | 1999-10-13 | 2004-03-23 | Giat Industries | Igniting device for a propellant charge |
| US6450099B1 (en) | 1999-10-13 | 2002-09-17 | Giat Industries | Device to fasten a sealing base onto an ammunition case and base adapted to this fastening device |
| US7458322B2 (en) | 1999-10-25 | 2008-12-02 | Mark A. Westrom | Cartridge for a firearm |
| USD435626S (en) | 2000-02-08 | 2000-12-26 | Benini Joseph C | Bullet |
| US9103641B2 (en) | 2000-02-23 | 2015-08-11 | Orbital Atk, Inc. | Reactive material enhanced projectiles and related methods |
| US6283035B1 (en) | 2000-04-06 | 2001-09-04 | Knight Armamant Company | Reduced propellant ammunition cartridges |
| US6375971B1 (en) | 2000-04-28 | 2002-04-23 | Ballistic Technologies, Inc. | Medicament dosing ballistic implant of improved accuracy |
| US6810816B2 (en) | 2000-06-07 | 2004-11-02 | Carl J. Rennard | Ammunition tracking system |
| RU2172467C1 (en) | 2000-07-05 | 2001-08-20 | 61 Научно-исследовательский испытательный институт железнодорожных войск | Press for unloading of cartridges |
| US6649095B2 (en) | 2000-11-06 | 2003-11-18 | Frederick J. Buja | Method and apparatus for controlling a mold melt-flow process using temperature sensors |
| USD447209S1 (en) | 2001-01-10 | 2001-08-28 | Sinterfire Inc. | Cartridge |
| USD455052S1 (en) | 2001-02-15 | 2002-04-02 | The Thermos Company | Can holder |
| USD455320S1 (en) | 2001-04-18 | 2002-04-09 | Ceramic Development International | Can holder |
| US6840149B2 (en) | 2001-05-15 | 2005-01-11 | Doris Nebel Beal Inter Vivos Patent Trust | In-situ formation of cap for ammunition projectile |
| US6644204B2 (en) | 2001-05-18 | 2003-11-11 | Giat Industries | Base for ammunition intended to receive an electrical igniter squib |
| US7231519B2 (en) | 2001-06-06 | 2007-06-12 | International Business Machines Corporation | Secure inter-node communication |
| US7232473B2 (en) | 2001-10-16 | 2007-06-19 | International Non-Toxic Composite | Composite material containing tungsten and bronze |
| US20030127011A1 (en) | 2002-01-04 | 2003-07-10 | Brad Mackerell | Low observable ammunition casing |
| US6672219B2 (en) | 2002-01-04 | 2004-01-06 | Tti Armory, L.L.C. | Low observable ammunition casing |
| US20030131751A1 (en) | 2002-01-11 | 2003-07-17 | Brad Mackerell | Subsonic and reduced velocity ammunition cartridges |
| US6796243B2 (en) | 2002-03-26 | 2004-09-28 | Rheinmetall W & M Gmbh | Cartridge |
| US7353756B2 (en) | 2002-04-10 | 2008-04-08 | Accutec Usa | Lead free reduced ricochet limited penetration projectile |
| US7299750B2 (en) | 2002-04-30 | 2007-11-27 | Ruag Ammotec Gmbh | Partial fragmentation and deformation bullets having an identical point of impact |
| US20040074412A1 (en) | 2002-10-21 | 2004-04-22 | Kightlinger Paul E. | Cartridge and chamber for firearm |
| US20100212533A1 (en) | 2002-10-21 | 2010-08-26 | Michael Brunn | Flare-bang projectile |
| US7204191B2 (en) | 2002-10-29 | 2007-04-17 | Polytech Ammunition Company | Lead free, composite polymer based bullet and method of manufacturing |
| US7213519B2 (en) | 2002-10-29 | 2007-05-08 | Polytech Ammunition Company | Composite polymer based cartridge case having an overmolded metal cup, polymer plug base assembly |
| US7000547B2 (en) | 2002-10-31 | 2006-02-21 | Amick Darryl D | Tungsten-containing firearm slug |
| US7014284B2 (en) | 2003-01-16 | 2006-03-21 | Morton William Bill | Ammunition having surface indicia and method of manufacture |
| US7056091B2 (en) | 2003-04-09 | 2006-06-06 | Powers Charles S | Propeller hub assembly having overlap zone with optional removable exhaust ring and sized ventilation plugs |
| US7383776B2 (en) | 2003-04-11 | 2008-06-10 | Amick Darryl D | System and method for processing ferrotungsten and other tungsten alloys, articles formed therefrom and methods for detecting the same |
| US20050081704A1 (en) | 2003-05-29 | 2005-04-21 | Nabil Husseini | Ammunition articles and method of making ammunition articles |
| US7059234B2 (en) | 2003-05-29 | 2006-06-13 | Natec, Inc. | Ammunition articles and method of making ammunition articles |
| US20050056183A1 (en) | 2003-09-11 | 2005-03-17 | Meshirer Milton S. | Ammunition articles comprising light-curable moisture-preventative sealant and method of manufacturing same |
| US7032492B2 (en) | 2003-09-11 | 2006-04-25 | Milton S. Meshirer | Ammunition articles comprising light-curable moisture-preventative sealant and method of manufacturing same |
| US20070056343A1 (en) | 2003-10-01 | 2007-03-15 | Gianluigi Cremonesi | Die set, machine and method for forming die-pressed cartridge cases |
| US7165496B2 (en) | 2003-11-06 | 2007-01-23 | Reynolds S Paul | Piston head cartridge for a firearm |
| US20060260500A1 (en) | 2004-02-06 | 2006-11-23 | Engel John W | High-pressure fixed munition for low-pressure launching system |
| US7461597B2 (en) | 2004-04-28 | 2008-12-09 | Combined Systems Inc. | Waterproof cartridge seal |
| US20060027125A1 (en) | 2004-04-28 | 2006-02-09 | Michael Brunn | Waterproof cartridge seal |
| USD540710S1 (en) | 2004-07-28 | 2007-04-17 | Philippe Charrin | Flower arrangement holder |
| US20060278116A1 (en) | 2004-09-02 | 2006-12-14 | T & P Game Recovery, Llc | Firearm ammunition for tracking wounded prey |
| US8813650B2 (en) | 2005-03-07 | 2014-08-26 | Solvay Advanced Polymers, L.L.C. | Ammunition casing |
| US8850985B2 (en) | 2005-03-07 | 2014-10-07 | Solvay Advanced Polymers, L.L.C. | Polymeric material suitable for making ammunition cartridge casings |
| US7750091B2 (en) | 2005-03-07 | 2010-07-06 | Solvay Advanced Polymers, L.L.C. | Polyphenylene-poly(aryl ether sulfone) blends, articles and method |
| US20130014665A1 (en) | 2005-03-07 | 2013-01-17 | Solvay Advanced Polymers, L.L.C. | Ammunition casing |
| US8240252B2 (en) | 2005-03-07 | 2012-08-14 | Nikica Maljkovic | Ammunition casing |
| US7585166B2 (en) | 2005-05-02 | 2009-09-08 | Buja Frederick J | System for monitoring temperature and pressure during a molding process |
| US20150268020A1 (en) | 2005-05-16 | 2015-09-24 | Hornady Manufacturing Company | Cartridge and bullet with controlled expansion |
| US20060283345A1 (en) | 2005-06-16 | 2006-12-21 | Feldman Paul H | Surveillance projectile |
| US20070214992A1 (en) | 2005-07-22 | 2007-09-20 | Snc Technologies Corp. | Thin walled, two component cartridge casing |
| WO2007014024A2 (en) | 2005-07-22 | 2007-02-01 | Snc Technologies Corp. | Thin walled and two component cartridge case |
| US20070214993A1 (en) | 2005-09-13 | 2007-09-20 | Milan Cerovic | Systems and methods for deploying electrodes for electronic weaponry |
| US7610858B2 (en) | 2005-12-27 | 2009-11-03 | Chung Sengshiu | Lightweight polymer cased ammunition |
| US20070181029A1 (en) | 2006-02-08 | 2007-08-09 | Gunsandmore.Info Llc | Method and apparatus for propelling a pellet or BB using a shock-sensitive explosive cap |
| US20070267587A1 (en) | 2006-05-18 | 2007-11-22 | Paul Russell Dalluge | Method and rotary valve actuator to apply increased torque proximate the open or closed position of a valve |
| US20100258023A1 (en) | 2006-05-24 | 2010-10-14 | Reynolds George L | Delayed extraction and a firearm cartridge case |
| US7841279B2 (en) | 2006-05-24 | 2010-11-30 | Reynolds George L | Delayed extraction and a firearm cartridge case |
| US7380505B1 (en) | 2006-06-29 | 2008-06-03 | Shiery Jeffrey C | Muzzleloading firearm projectile |
| US7392746B2 (en) | 2006-06-29 | 2008-07-01 | Hansen Richard D | Bullet composition |
| US9200157B2 (en) | 2006-09-06 | 2015-12-01 | Solvay Advanced Polymers, L.L.C. | Aromatic polycarbonate composition |
| USD583927S1 (en) | 2006-12-14 | 2008-12-30 | Mckeon Products, Inc. | Ear plug |
| US8443729B2 (en) | 2007-02-22 | 2013-05-21 | Hornady Manufacturing Company | Cartridge for a firearm |
| US7930977B2 (en) | 2007-02-26 | 2011-04-26 | Klein John M | Non-lethal projectile ammunition |
| US8056232B2 (en) | 2007-07-24 | 2011-11-15 | Pratt & Whitney Canada Corp. | Method for manufacturing of fuel nozzle floating collar |
| US20120199033A1 (en) | 2007-09-17 | 2012-08-09 | George Evan Bybee | Coated ammunition and methods of making |
| USD626619S1 (en) | 2008-05-22 | 2010-11-02 | Frank Gogol | Projectile |
| US8511233B2 (en) | 2008-06-11 | 2013-08-20 | Norma Precision Ab | Projectile for fire arms |
| US20090314178A1 (en) | 2008-06-12 | 2009-12-24 | South Joseph T | Lightweight cartridge case |
| US8156870B2 (en) | 2008-06-12 | 2012-04-17 | The United States Of America As Represented By The Secretary Of The Army | Lightweight cartridge case |
| US7568417B1 (en) | 2008-06-23 | 2009-08-04 | Lee Richard J | Device and method for pulling bullets from cartridges |
| US8540828B2 (en) | 2008-08-19 | 2013-09-24 | Alliant Techsystems Inc. | Nontoxic, noncorrosive phosphorus-based primer compositions and an ordnance element including the same |
| US20100101444A1 (en) | 2008-10-27 | 2010-04-29 | Schluckebier David K | Wad with ignition chamber |
| US9500453B2 (en) | 2008-10-27 | 2016-11-22 | Ra Brands, L.L.C. | Wad with ignition chamber |
| US8201867B2 (en) | 2009-02-16 | 2012-06-19 | Mjt Holdings Llc | Threaded hoist ring screw retainer |
| US8007370B2 (en) | 2009-03-10 | 2011-08-30 | Cobra Golf, Inc. | Metal injection molded putter |
| US20100234132A1 (en) | 2009-03-10 | 2010-09-16 | Acushnet Company | Metal injection molded putter |
| US20100275804A1 (en) | 2009-05-04 | 2010-11-04 | Roger Blaine Trivette | Plastic ammunition casing and method |
| US8186273B2 (en) | 2009-05-04 | 2012-05-29 | Roger Blaine Trivette | Plastic ammunition casing and method |
| US8408137B2 (en) | 2009-05-06 | 2013-04-02 | Vin Battaglia | Spiral case ammunition |
| US20100282112A1 (en) | 2009-05-06 | 2010-11-11 | Vin Battaglia | Spiral case ammunition |
| US20110179965A1 (en) | 2009-11-02 | 2011-07-28 | Mark Mason | Ammunition assembly |
| USD631699S1 (en) | 2009-11-19 | 2011-02-01 | Moreau Glen W | Cup |
| USD633166S1 (en) | 2010-01-15 | 2011-02-22 | Olin Corporation | Disc-shaped projectile for a shot shell |
| US8206522B2 (en) | 2010-03-31 | 2012-06-26 | Alliant Techsystems Inc. | Non-toxic, heavy-metal free sensitized explosive percussion primers and methods of preparing the same |
| US20120180685A1 (en) | 2010-05-26 | 2012-07-19 | Se-Hong O | Forty millimeter caliber exercise bullet |
| US20130076865A1 (en) | 2010-06-18 | 2013-03-28 | Canon Kabushiki Kaisha | Position/orientation measurement apparatus, processing method therefor, and non-transitory computer-readable storage medium |
| US20120024183A1 (en) | 2010-07-30 | 2012-02-02 | Mnp Corporation | Cartridge Base and Plastic Cartridge Case Assembly for Ammunition Cartridge |
| US8573126B2 (en) | 2010-07-30 | 2013-11-05 | Pcp Tactical, Llc | Cartridge base and plastic cartridge case assembly for ammunition cartridge |
| US9599443B2 (en) | 2010-07-30 | 2017-03-21 | Pcp Tactical, Llc | Base insert for polymer ammunition cartridges |
| US20170191812A1 (en) | 2010-07-30 | 2017-07-06 | Pcp Tactical, Llc | Base Insert for Polymer Ammunition Cartridges |
| US20120037029A1 (en) | 2010-08-14 | 2012-02-16 | Klement Daniel L | High visibility ammunition casings |
| US8978559B2 (en) | 2010-09-10 | 2015-03-17 | Nylon Corporation Of America, Inc. | Cartridge cases and base inserts therefor |
| US8522684B2 (en) | 2010-09-10 | 2013-09-03 | Nylon Corporation Of America, Inc. | Cartridge cases and base inserts therefor |
| US9091516B2 (en) | 2010-10-07 | 2015-07-28 | Nylon Corporation Of America, Inc. | Ammunition cartridge case bodies made with polymeric nanocomposite material |
| WO2012047615A1 (en) | 2010-10-07 | 2012-04-12 | Nylon Corporation Of America, Inc. | Ammunition cartridge case bodies made with polymeric nanocomposite material |
| CA2813634A1 (en) | 2010-10-07 | 2012-04-12 | Nylon Corporation Of America, Inc. | Ammunition cartridge case bodies made with polymeric nanocomposite material |
| EP2625486A4 (en) | 2010-10-07 | 2017-08-23 | Nylon Corporation Of America, Inc. | Ammunition cartridge case bodies made with polymeric nanocomposite material |
| US20130186294A1 (en) | 2010-10-07 | 2013-07-25 | Nylon Corporation Of America, Inc. | Ammunition cartridge case bodies made with polymeric nanocomposite material |
| EP2625486A1 (en) | 2010-10-07 | 2013-08-14 | Nylon Corporation Of America, Inc. | Ammunition cartridge case bodies made with polymeric nanocomposite material |
| US9631907B2 (en) | 2010-11-10 | 2017-04-25 | True Velocity, Inc. | Polymer ammunition cartridge having a wicking texturing |
| US20160349023A1 (en) | 2010-11-10 | 2016-12-01 | True Velocity, Inc. | Subsonic polymeric ammunition cartridge |
| US10480912B2 (en) | 2010-11-10 | 2019-11-19 | True Velocity Ip Holdings, Llc | Primer insert having a primer pocket groove |
| US10480911B2 (en) | 2010-11-10 | 2019-11-19 | True Velocity Ip Holdings, Llc | Primer insert having a primer pocket groove |
| US8561543B2 (en) | 2010-11-10 | 2013-10-22 | True Velocity, Inc. | Lightweight polymer ammunition cartridge casings |
| US20170089673A1 (en) | 2010-11-10 | 2017-03-30 | True Velocity, Inc. | Polymer ammunition having a projectile made by metal injection molding |
| US10466021B2 (en) | 2010-11-10 | 2019-11-05 | True Velocity Ip Holdings, Llc | Polymer cartridge having a primer insert with a primer pocket groove |
| US10466020B2 (en) | 2010-11-10 | 2019-11-05 | True Velocity Ip Holdings, Llc | Primer insert having a primer pocket groove |
| US20170089679A1 (en) | 2010-11-10 | 2017-03-30 | True Velocity, Inc. | Method of making a polymeric subsonic ammunition cartridge |
| US10458762B2 (en) | 2010-11-10 | 2019-10-29 | True Velocity Ip Holdings, Llc | Polymer ammunition having a primer insert with a primer pocket groove |
| US20190316886A1 (en) | 2010-11-10 | 2019-10-17 | True Velocity Ip Holdings, Llc | Method of Making a Primer Insert for Use in Polymer Ammunition |
| US20190310058A1 (en) | 2010-11-10 | 2019-10-10 | True Velocity Ip Holdings, Llc | Method of Making a Primer Insert for Use in Polymer Ammunition |
| US20170089674A1 (en) | 2010-11-10 | 2017-03-30 | True Velocity Inc. | Metal injection molded ammunition cartridge |
| US10488165B2 (en) | 2010-11-10 | 2019-11-26 | True Velocity Ip Holdings, Llc | Primer insert having a primer pocket groove |
| US20190310059A1 (en) | 2010-11-10 | 2019-10-10 | True Velocity Ip Holdings, Llc | Lightweight polymer ammunition cartridge casings |
| US20170089675A1 (en) | 2010-11-10 | 2017-03-30 | True Velocity, Inc. | Subsonic polymeric ammunition cartridge |
| US20190360788A1 (en) | 2010-11-10 | 2019-11-28 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition cartridge |
| US10429156B2 (en) | 2010-11-10 | 2019-10-01 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition cartridge |
| US10408582B2 (en) | 2010-11-10 | 2019-09-10 | True Velocity Ip Holdings, Llc | Polymer cartridge having a primer insert with a primer pocket groove |
| US20190376774A1 (en) | 2010-11-10 | 2019-12-12 | True Velocity Ip Holdings, Llc | One piece polymer ammunition cartridge having a primer insert and method of making the same |
| US10408592B2 (en) | 2010-11-10 | 2019-09-10 | True Velocity Ip Holdings, Llc | One piece polymer ammunition cartridge having a primer insert and methods of making the same |
| US20190257625A1 (en) | 2010-11-10 | 2019-08-22 | True Velocity Ip Holdings, Llc | Method of Making a Primer Insert for Use in Polymer Ammunition |
| US10359262B2 (en) | 2010-11-10 | 2019-07-23 | True Velocity Ip Holdings Llc | Polymer ammunition having a primer insert with a primer pocket groove |
| US20170080498A1 (en) | 2010-11-10 | 2017-03-23 | True Velocity, Inc. | Method of making a projectile by metal injection molding |
| US20170115105A1 (en) | 2010-11-10 | 2017-04-27 | True Velocity, Inc. | Method of making polymer ammunition having a primer diffuser |
| US10352670B2 (en) | 2010-11-10 | 2019-07-16 | True Velocity Ip Holdings, Llc | Lightweight polymer ammunition cartridge casings |
| US10352664B2 (en) | 2010-11-10 | 2019-07-16 | True Velocity Ip Holdings, Llc | Method of making a primer insert for use in polymer ammunition |
| US10345088B2 (en) | 2010-11-10 | 2019-07-09 | True Velocity Ip Holdings, Llc | Method of making a primer insert for use in polymer ammunition |
| US20170082411A1 (en) | 2010-11-10 | 2017-03-23 | True Velocity, Inc. | Metal injection molded projectile |
| US20190204050A1 (en) | 2010-11-10 | 2019-07-04 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition cartridge |
| US20120111219A1 (en) | 2010-11-10 | 2012-05-10 | True Velocity, Inc. | Lightweight polymer ammunition cartridge casings |
| US20190170488A1 (en) | 2010-11-10 | 2019-06-06 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190376773A1 (en) | 2010-11-10 | 2019-12-12 | True Velocity Ip Holdings, Llc | Method of making a polymeric subsonic ammunition cartridge |
| US20190383590A1 (en) | 2010-11-10 | 2019-12-19 | True Velocity Ip Holdings, Llc | Polymer Cartridge Having a Primer Insert With a Primer Pocket Groove |
| US20190137234A1 (en) | 2010-11-10 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US9644930B1 (en) | 2010-11-10 | 2017-05-09 | True Velocity, Inc. | Method of making polymer ammunition having a primer diffuser |
| US20170153093A9 (en) | 2010-11-10 | 2017-06-01 | True Velocity, Inc. | Polymer ammunition having a wicking texturing |
| US20190137238A1 (en) | 2010-11-10 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137230A1 (en) | 2010-11-10 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge Nose |
| US20190137236A1 (en) | 2010-11-10 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190107375A1 (en) | 2010-11-10 | 2019-04-11 | True Velocity Ip Holdings, Llc | Method of making polymeric subsonic ammunition |
| US10254096B2 (en) | 2010-11-10 | 2019-04-09 | True Velocity Ip Holdings, Llc | Polymer ammunition having a MIM primer insert |
| US20170153099A9 (en) | 2010-11-10 | 2017-06-01 | True Velocity, Inc. | Method of making polymer ammunition having a wicking texturing |
| US10240905B2 (en) | 2010-11-10 | 2019-03-26 | True Velocity Ip Holdings, Llc | Polymer ammunition having a primer insert with a primer pocket groove |
| US10234253B2 (en) | 2010-11-10 | 2019-03-19 | True Velocity, Inc. | Method of making a polymer ammunition cartridge having a metal injection molded primer insert |
| US10234249B2 (en) | 2010-11-10 | 2019-03-19 | True Velocity Ip Holdings, Llc | Polymer ammunition having a primer insert with a primer pocket groove |
| US20190078862A1 (en) | 2010-11-10 | 2019-03-14 | True Velocity Ip Holdings, Llc | Polymer ammunition having a mim primer insert |
| US20160003595A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Method of making a polymer ammunition cartridge having a metal injection molded primer insert |
| US20160003596A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Method of making polymer ammunition having a metal injection molded primer insert |
| US20160003594A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Method of making polymer ammunition having a wicking texturing |
| US20160003601A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Metal injection molded primer insert for polymer ammunition |
| US20160003588A1 (en)* | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Polymer ammunition having a wicking texturing |
| US20160003597A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Method of making a polymer ammunition cartridge having a wicking texturing |
| US20160003589A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Lightweight polymer ammunition cartridge casings |
| US10190857B2 (en) | 2010-11-10 | 2019-01-29 | True Velocity Ip Holdings, Llc | Method of making polymeric subsonic ammunition |
| US20160003590A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Polymer ammunition cartridge having a metal injection molded primer insert |
| US20160003593A1 (en) | 2010-11-10 | 2016-01-07 | True Velocity, Inc. | Method of making a metal primer insert by injection molding |
| US20160033241A1 (en) | 2010-11-10 | 2016-02-04 | True Velocity, Inc. | A polymer ammunition having a mim primer insert |
| US20190025023A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190025022A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190025026A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Method of making a polymer ammunition cartridge |
| US20190025019A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190025024A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190025021A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190025020A1 (en) | 2010-11-10 | 2019-01-24 | True Velocity Ip Holdings, Llc | Subsonic polymeric ammunition with diffuser |
| US20190011239A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | Polymer Ammunition and Cartridge Primer Insert |
| US20190011235A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | One piece polymer ammunition cartridge having a primer insert and methods of making the same |
| US20170199018A9 (en) | 2010-11-10 | 2017-07-13 | True Velocity, Inc. | Subsonic polymeric ammunition |
| US20190011233A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | One piece polymer ammunition cartridge having a primer insert and methods of making the same |
| US20190011238A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | Polymer Ammunition and Cartridge Primer Insert |
| US20190011232A1 (en)* | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | One piece polymer ammunition cartridge having a primer insert and methods of making the same |
| US20190011237A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | Polymer Ammunition and Cartridge Primer Insert |
| US20190011236A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | Polymer Ammunition and Cartridge Primer Insert |
| US20190011241A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | Method of Making a Primer Insert for Use in Polymer Ammunition |
| US20190011240A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | Polymer Ammunition and Cartridge Primer Insert |
| US20190011234A1 (en) | 2010-11-10 | 2019-01-10 | True Velocity Ip Holdings, Llc | One piece polymer ammunition cartridge having a primer insert and methods of making the same |
| US9429407B2 (en) | 2010-11-10 | 2016-08-30 | True Velocity, Inc. | Lightweight polymer ammunition |
| US9441930B2 (en) | 2010-11-10 | 2016-09-13 | True Velocity, Inc. | Method of making lightweight polymer ammunition |
| US10145662B2 (en) | 2010-11-10 | 2018-12-04 | True Velocity Ip Holdings, Llc | Method of making polymer ammunition having a metal injection molded primer insert |
| US10081057B2 (en) | 2010-11-10 | 2018-09-25 | True Velocity, Inc. | Method of making a projectile by metal injection molding |
| US20170205217A9 (en) | 2010-11-10 | 2017-07-20 | True Velocity, Inc. | Method of making a polymer ammunition cartridge having a wicking texturing |
| US20180259310A1 (en) | 2010-11-10 | 2018-09-13 | True Velocity, Inc. | Method of Making a Primer Insert for Use in Polymer Ammunition |
| US10048049B2 (en) | 2010-11-10 | 2018-08-14 | True Velocity, Inc. | Lightweight polymer ammunition cartridge having a primer diffuser |
| US20160349028A1 (en) | 2010-11-10 | 2016-12-01 | True Velocity, Inc. | Method of making a polymeric subsonic ammunition cartridge |
| US20160349022A1 (en)* | 2010-11-10 | 2016-12-01 | True Velocity, Inc. | Subsonic polymeric ammunition |
| US10480915B2 (en) | 2010-11-10 | 2019-11-19 | True Velocity Ip Holdings, Llc | Method of making a polymeric subsonic ammunition cartridge |
| US9513096B2 (en) | 2010-11-10 | 2016-12-06 | True Velocity, Inc. | Method of making a polymer ammunition cartridge casing |
| US20160356588A1 (en) | 2010-11-10 | 2016-12-08 | True Velocity, Inc. | Primer diffuser for polymer ammunition cartridges |
| US10048052B2 (en) | 2010-11-10 | 2018-08-14 | True Velocity, Inc. | Method of making a polymeric subsonic ammunition cartridge |
| US20180224253A1 (en) | 2010-11-10 | 2018-08-09 | True Velocity, Inc. | Method of Making a Primer Insert for Use in Polymer Ammunition |
| US10041770B2 (en) | 2010-11-10 | 2018-08-07 | True Velocity, Inc. | Metal injection molded ammunition cartridge |
| US9933241B2 (en) | 2010-11-10 | 2018-04-03 | True Velocity, Inc. | Method of making a primer insert for use in polymer ammunition |
| US20160377399A1 (en) | 2010-11-10 | 2016-12-29 | True Velocity, Inc. | Method of making polymeric subsonic ammunition |
| US9546849B2 (en) | 2010-11-10 | 2017-01-17 | True Velocity, Inc. | Lightweight polymer ammunition cartridge casings |
| US9927219B2 (en) | 2010-11-10 | 2018-03-27 | True Velocity, Inc. | Primer insert for a polymer ammunition cartridge casing |
| US9885551B2 (en) | 2010-11-10 | 2018-02-06 | True Velocity, Inc. | Subsonic polymeric ammunition |
| US9835423B2 (en) | 2010-11-10 | 2017-12-05 | True Velocity, Inc. | Polymer ammunition having a wicking texturing |
| US20170299352A9 (en) | 2010-11-10 | 2017-10-19 | True Velocity, Inc. | Subsonic polymeric ammunition cartridge |
| US20150241183A1 (en) | 2011-01-14 | 2015-08-27 | Pcp Tactical, Llc | Overmolded high strength polymer-based cartridge casing for blank and subsonic ammunition |
| US8869702B2 (en) | 2011-01-14 | 2014-10-28 | Pcp Tactical, Llc | Variable inside shoulder polymer cartridge |
| US20160146585A1 (en) | 2011-01-14 | 2016-05-26 | Pcp Tactical Llc. | Narrowing high strength polymer-based cartridge casing for blank and subsonic ammunition |
| US20120180688A1 (en)* | 2011-01-14 | 2012-07-19 | Pcp Ammunition Company Llc | High strength polymer-based cartridge casing and manufacturing method |
| WO2012097317A2 (en) | 2011-01-14 | 2012-07-19 | Pcp Ammunition Company Llc | High strength polymer-based cartridge casing and manufacturing method |
| WO2012097317A3 (en) | 2011-01-14 | 2012-11-01 | Pcp Ammunition Company Llc | High strength polymer-based cartridge casing and manufacturing method |
| US20120180687A1 (en) | 2011-01-14 | 2012-07-19 | Pcp Ammunition Company Llc | High strength polymer-based cartridge casing for blank and subsonic ammunition |
| US20130014664A1 (en)* | 2011-01-14 | 2013-01-17 | PCP Ammunition Company, LLC | Narrowing high strength polymer-based cartridge casing for blank and subsonic ammunition |
| WO2012097320A1 (en) | 2011-01-14 | 2012-07-19 | Pcp Ammunition Company Llc | High strength polymer-based cartridge casing for blank and subsonic ammunition |
| US8875633B2 (en) | 2011-01-14 | 2014-11-04 | Pcp Tactical, Llc | Adhesive lip for a high strength polymer-based cartridge casing and manufacturing method |
| US9003973B1 (en) | 2011-01-14 | 2015-04-14 | Pcp Tactical, Llc | Narrowing high strength polymer-based cartridge casing for blank and subsonic ammunition |
| US8807008B2 (en) | 2011-01-14 | 2014-08-19 | Pcp Tactical, Llc | Polymer-based machine gun belt links and cartridge casings and manufacturing method |
| US8763535B2 (en) | 2011-01-14 | 2014-07-01 | Pcp Tactical, Llc | Narrowing high strength polymer-based cartridge casing for blank and subsonic ammunition |
| US20140060372A1 (en) | 2011-01-14 | 2014-03-06 | Pcp Tactical, Llc | Variable inside shoulder polymer cartridge |
| US8443730B2 (en) | 2011-01-14 | 2013-05-21 | Pcp Tactical, Llc | High strength polymer-based cartridge casing and manufacturing method |
| US8790455B2 (en) | 2011-01-19 | 2014-07-29 | Anatoli Borissov | Supersonic swirling separator 2 (Sustor2) |
| US20120291655A1 (en) | 2011-03-29 | 2012-11-22 | Jones Kenneth R | Spin Stabilized And/ Or Drag Stabilized, Blunt Impact Non-Lethal Projectile |
| US20140224144A1 (en) | 2011-07-06 | 2014-08-14 | Hans-Jurgen Neugebauer | Cartridge Casing And Method Of Manufacturing A Cartridge Casing |
| US9625241B2 (en) | 2011-07-06 | 2017-04-18 | Hans-Jurgen Neugebauer | Cartridge casing and method of manufacturing a cartridge casing |
| US20130008335A1 (en) | 2011-07-07 | 2013-01-10 | Menefee Iii James Y | Cartridge for multiplex load |
| USD800245S1 (en) | 2011-07-26 | 2017-10-17 | Ra Brands, L.L.C. | Firearm bullet |
| USD800244S1 (en) | 2011-07-26 | 2017-10-17 | Ra Brands, L.L.C. | Firearm bullet |
| US9366512B2 (en) | 2011-07-26 | 2016-06-14 | Ra Brands, L.L.C. | Multi-component bullet with core retention feature and method of manufacturing the bullet |
| USD800246S1 (en) | 2011-07-26 | 2017-10-17 | Ra Brands, L.L.C. | Firearm bullet |
| US9188412B2 (en) | 2011-07-28 | 2015-11-17 | Mac, Llc | Polymeric ammunition casing geometry |
| US9395165B2 (en) | 2011-07-28 | 2016-07-19 | Mac, Llc | Subsonic ammunition casing |
| US9335137B2 (en) | 2011-07-28 | 2016-05-10 | Mac, Llc | Polymeric ammunition casing geometry |
| US9182204B2 (en) | 2011-07-28 | 2015-11-10 | Mac, Llc | Subsonic ammunition casing |
| US8641842B2 (en) | 2011-08-31 | 2014-02-04 | Alliant Techsystems Inc. | Propellant compositions including stabilized red phosphorus, a method of forming same, and an ordnance element including the same |
| US20140261044A1 (en) | 2011-10-14 | 2014-09-18 | Lws Ammunition Llc | Bullets With Lateral Damage Stopping Power |
| US9213175B2 (en) | 2011-10-28 | 2015-12-15 | Craig B. Arnold | Microscope with tunable acoustic gradient index of refraction lens enabling multiple focal plan imaging |
| USD861118S1 (en) | 2011-11-09 | 2019-09-24 | True Velocity Ip Holdings, Llc | Primer insert |
| WO2013070250A1 (en) | 2011-11-09 | 2013-05-16 | True Velocity, Inc. | Lightweight polymer ammunition cartridge casings |
| USD828483S1 (en) | 2011-11-09 | 2018-09-11 | True Velocity Ip Holdings, Llc | Cartridge base insert |
| USD861119S1 (en) | 2011-11-09 | 2019-09-24 | True Velocity Ip Holdings, Llc | Ammunition cartridge |
| USD849181S1 (en) | 2011-11-09 | 2019-05-21 | True Velocity Ip Holdings, Llc | Cartridge primer insert |
| US9347457B2 (en) | 2011-11-16 | 2016-05-24 | Robert Bosch Gmbh | Liquid pump with axial thrust washer |
| US9157709B2 (en) | 2011-12-08 | 2015-10-13 | Setpoint Systems, Inc. | Apparatus, system, and method for manufacturing ammunition cartridge cases |
| US9683818B2 (en) | 2011-12-22 | 2017-06-20 | Polycase Ammunition, Llc | Polymer-based composite casings and ammunition containing the same, and methods of making and using the same |
| US20150075400A1 (en) | 2011-12-22 | 2015-03-19 | Polycase Ammunition, Llc | Polymer-Based Composite Casings and Ammunition Containing the Same, and Methods of Making and Using the Same |
| WO2013096848A1 (en) | 2011-12-22 | 2013-06-27 | LEMKE, Paul | Polymer-based composite casings and ammunition containing the same, and methods of making and using the same |
| USD715888S1 (en) | 2012-01-13 | 2014-10-21 | Pcp Tactical, Llc | Radiused insert |
| USD765214S1 (en) | 2012-01-13 | 2016-08-30 | Pcp Tactical, Llc | Radiused insert |
| USD689975S1 (en) | 2012-01-16 | 2013-09-17 | Alliant Techsystems Inc. | Practice projectile |
| US9200880B1 (en) | 2012-03-09 | 2015-12-01 | Carolina PCA, LLC | Subsonic ammunication articles having a rigid outer casing or rigid inner core and methods for making the same |
| US9032855B1 (en) | 2012-03-09 | 2015-05-19 | Carolina PCA, LLC | Ammunition articles and methods for making the same |
| USD683419S1 (en) | 2012-04-12 | 2013-05-28 | Peter D. Rebar | Lead-free airgun pellet |
| US9377278B2 (en) | 2012-05-02 | 2016-06-28 | Darren Rubin | Biological active bullets, systems, and methods |
| US20130291711A1 (en) | 2012-05-03 | 2013-11-07 | Halliburton Energy Services, Inc. | Explosive Device Booster Assembly and Method of Use |
| US9921040B2 (en) | 2012-05-22 | 2018-03-20 | Darren Rubin | Longitudinally sectioned firearms projectiles |
| US9255775B1 (en) | 2012-05-22 | 2016-02-09 | Darren Rubin | Longitudinally sectioned firearms projectiles |
| US9212879B2 (en) | 2012-05-25 | 2015-12-15 | James Curtis Whitworth | Firearm cleaning shell |
| US8857343B2 (en) | 2012-05-29 | 2014-10-14 | Liberty Ammunition, Llc | High volume multiple component projectile assembly |
| USD675882S1 (en) | 2012-06-12 | 2013-02-12 | Irving R. Crockett | French fry carton holder and adaptor for use with vehicle cup holder |
| US20160003585A1 (en) | 2012-06-27 | 2016-01-07 | Aai Corporation | Ballistic sealing, component retention, and projectile launch control for an ammunition cartridge assembly |
| WO2014062256A2 (en) | 2012-07-13 | 2014-04-24 | Pcp Tactical, Llc | Narrowing high strength polymer-based cartridge casing for blank and subsonic ammunition |
| CN102901403B (en) | 2012-09-07 | 2014-06-25 | 中北大学 | Bullet puller of large-caliber machine gun bullet |
| CN102901403A (en) | 2012-09-07 | 2013-01-30 | 中北大学 | Bullet puller of large-caliber machine gun bullet |
| USD797880S1 (en) | 2012-09-28 | 2017-09-19 | Lws Ammunition Llc | Pistol cartridge |
| US8689696B1 (en) | 2013-02-21 | 2014-04-08 | Caneel Associates, Inc. | Composite projectile and cartridge with composite projectile |
| US20140311332A1 (en) | 2013-03-15 | 2014-10-23 | Alliant Techsystems Inc. | Combination gas operated rifle and subsonic cartridge |
| US20140260925A1 (en) | 2013-03-15 | 2014-09-18 | Cybernet Systems Corporation | Integrated polymer and metal case ammunition manufacturing system and method |
| US9170080B2 (en) | 2013-03-15 | 2015-10-27 | Alliant Techsystems Inc. | Reloading kit with lead free bullet composition |
| USD717909S1 (en) | 2013-06-21 | 2014-11-18 | Roger Dale Thrift | Jeweled ammunition |
| US20150033970A1 (en) | 2013-07-31 | 2015-02-05 | Mac, Llc | Engineered neck angle ammunition casing |
| US9759554B2 (en) | 2013-08-02 | 2017-09-12 | Omnivision Technologies, Inc. | Application specific, dual mode projection system and method |
| US9212876B1 (en) | 2013-08-30 | 2015-12-15 | The United States Of America As Represented By The Secretary Of The Army | Large caliber frangible projectile |
| US9389052B2 (en) | 2013-09-18 | 2016-07-12 | The United States Of America As Represented By The Secretary Of The Army | Jacketed bullet |
| US9658042B2 (en) | 2013-09-23 | 2017-05-23 | Hornady Manufacturing Company | Bullet with controlled fragmentation |
| US9857151B2 (en) | 2013-10-21 | 2018-01-02 | General Dynamics Ordnance and Tactical Systems—Canada, Inc. | Ring fire primer |
| US8893621B1 (en) | 2013-12-07 | 2014-11-25 | Rolando Escobar | Projectile |
| US9528799B2 (en) | 2014-01-13 | 2016-12-27 | Mac Llc | Neck polymeric ammunition casing geometry |
| US9784667B2 (en) | 2014-02-06 | 2017-10-10 | Ofi Testing Equipment, Inc. | High temperature fluid sample aging cell |
| US9989339B2 (en) | 2014-02-10 | 2018-06-05 | Ruag Ammotec Gmbh | Fragmenting projectile having projectile cores made of Pb or Pb-free materials having fragmentation in steps |
| US20170261294A1 (en) | 2014-02-10 | 2017-09-14 | Ruag Ammotec Gmbh | Fragmenting projectile having projectile cores made of pb or pb-free materials having fragmentation in steps |
| US20150226220A1 (en) | 2014-02-13 | 2015-08-13 | Pentair Flow Technologies, Llc | Pump and Electric Insulating Oil for Use Therein |
| US20160265886A1 (en) | 2014-03-18 | 2016-09-15 | Lonnie Aldrich | Reusable Plastic Ammunition Casing |
| US9453714B2 (en) | 2014-04-04 | 2016-09-27 | Mac, Llc | Method for producing subsonic ammunition casing |
| US9709368B2 (en) | 2014-04-30 | 2017-07-18 | G9 Holdings, Llc | Projectile with enhanced ballistics |
| US9329004B2 (en) | 2014-05-08 | 2016-05-03 | Scot M Pace | Munition having a reusable housing assembly and a removable powder chamber |
| US9254503B2 (en) | 2014-05-13 | 2016-02-09 | Tyler Ward | Enamel coated bullet, method of making an enamel coated bullet |
| USD754223S1 (en) | 2014-06-26 | 2016-04-19 | Sipdark Llc | Whiskey bullet |
| US20190025025A1 (en) | 2014-07-01 | 2019-01-24 | True Velocity Ip Holdings, Llc | Polymer ammunition cartridge having a metal injection molded primer insert |
| WO2016003817A1 (en) | 2014-07-01 | 2016-01-07 | True Velocity, Inc. | Lightweight polymer ammunition cartridge casings |
| USD752397S1 (en) | 2014-08-29 | 2016-03-29 | Yeti Coolers, Llc | Beverage holder |
| US20160102030A1 (en) | 2014-09-10 | 2016-04-14 | University Of Central Florida Research Foundation Inc. | Primer for Firearms and Other Munitions |
| US10124343B2 (en) | 2014-09-26 | 2018-11-13 | Kun Sheng Machine Co., Ltd. | Crusher with cutter assembly and cutter thereof |
| USD764624S1 (en) | 2014-10-13 | 2016-08-23 | Olin Corporation | Shouldered round nose bullet |
| US20160245626A1 (en) | 2014-11-14 | 2016-08-25 | Alcoa Inc. | Aluminum shotgun shell case, methods of making, and using the same |
| US20160209186A1 (en) | 2015-01-16 | 2016-07-21 | Snake River Machine, Inc. | Less-lethal munition and mechanical firing device |
| US9879954B2 (en) | 2015-01-16 | 2018-01-30 | Snake River Machine, Inc. | Less-lethal munition and mechanical firing device |
| USD773009S1 (en) | 2015-02-04 | 2016-11-29 | William R. Bowers | Case for an ammunition cartridge |
| US9337278B1 (en) | 2015-02-25 | 2016-05-10 | Triquint Semiconductor, Inc. | Gallium nitride on high thermal conductivity material device and method |
| USD774824S1 (en) | 2015-04-15 | 2016-12-27 | Kenneth John Gallagher | Inverted bottle dispenser base |
| USD778391S1 (en) | 2015-04-28 | 2017-02-07 | True Velocity, Inc. | Notched cartridge base insert |
| USD779021S1 (en) | 2015-04-28 | 2017-02-14 | True Velocity, Inc. | Cylindrically square cartridge base insert |
| USD780283S1 (en) | 2015-06-05 | 2017-02-28 | True Velocity, Inc. | Primer diverter cup used in polymer ammunition |
| US10260847B2 (en) | 2015-07-27 | 2019-04-16 | Shell Shock Technologies LLC | Fire arm casing and cartridge |
| US20170030690A1 (en) | 2015-07-27 | 2017-02-02 | Shell Shock Technologies Inc. | Fire Arm Casing and Cartridge |
| US20170030692A1 (en) | 2015-07-27 | 2017-02-02 | Shell Shock Technologies Inc. | Method of making a casing and cartridge for firearm |
| US9939236B2 (en) | 2015-07-27 | 2018-04-10 | Shell Shock Technologies, Llc | Method of making a casing and cartridge for firearm |
| USD813975S1 (en) | 2015-08-05 | 2018-03-27 | Mark White | Low volume subsonic bullet cartridge case |
| USD778394S1 (en) | 2015-08-07 | 2017-02-07 | True Velocity, Inc. | Projectile aperture wicking pattern |
| USD779024S1 (en) | 2015-08-07 | 2017-02-14 | True Velocity, Inc. | Projectile aperture wicking pattern |
| USD778393S1 (en) | 2015-08-07 | 2017-02-07 | True Velocity, Inc. | Projectile aperture wicking pattern |
| USD778395S1 (en) | 2015-08-11 | 2017-02-07 | True Velocity, Inc. | Projectile aperture wicking pattern |
| US20170082409A1 (en) | 2015-09-18 | 2017-03-23 | True Velocity, Inc. | Subsonic polymeric ammunition |
| US9587918B1 (en) | 2015-09-24 | 2017-03-07 | True Velocity, Inc. | Ammunition having a projectile made by metal injection molding |
| US20180321023A1 (en)* | 2015-11-12 | 2018-11-08 | Randy S. Teig | Mechanically adaptable projectile and method of manufacturing the same |
| USD792200S1 (en) | 2015-11-19 | 2017-07-18 | Esr Performance Corp | Bullet lug nut cap |
| US10041777B1 (en) | 2016-03-09 | 2018-08-07 | True Velocity, Inc. | Three-piece primer insert having an internal diffuser for polymer ammunition |
| US20170261296A1 (en) | 2016-03-09 | 2017-09-14 | True Velocity, Inc. | Method of making a two-piece primer insert |
| US20190025036A1 (en) | 2016-03-09 | 2019-01-24 | True Velocity Ip Holdings, Llc | Polymer Ammunition Cartridge Having a Three-Piece Primer Insert |
| US20190025035A1 (en) | 2016-03-09 | 2019-01-24 | True Velocity Ip Holdings, Llc | Method of Making Polymer Ammunition Cartridge Having a Two-Piece Primer Insert |
| US10101140B2 (en) | 2016-03-09 | 2018-10-16 | True Velocity Ip Holdings, Llc | Polymer ammunition having a three-piece primer insert |
| US9506735B1 (en) | 2016-03-09 | 2016-11-29 | True Velocity, Inc. | Method of making polymer ammunition cartridges having a two-piece primer insert |
| US20180224256A1 (en) | 2016-03-09 | 2018-08-09 | True Velocity, Inc. | Polymer Ammunition Having a Three-Piece Primer Insert |
| US10054413B1 (en) | 2016-03-09 | 2018-08-21 | True Velocity, Inc. | Polymer ammunition having a three-piece primer insert |
| US9523563B1 (en) | 2016-03-09 | 2016-12-20 | True Velocity, Inc. | Method of making ammunition having a two-piece primer insert |
| US10048050B1 (en) | 2016-03-09 | 2018-08-14 | True Velocity, Inc. | Polymer ammunition cartridge having a three-piece primer insert |
| US20180224252A1 (en) | 2016-03-09 | 2018-08-09 | Msato, Llc | Pellet Shaped Marking Round for Air Rifles and Pistols |
| US9835427B2 (en) | 2016-03-09 | 2017-12-05 | True Velocity, Inc. | Two-piece primer insert for polymer ammunition |
| US10041776B1 (en) | 2016-03-09 | 2018-08-07 | True Velocity, Inc. | Three-piece primer insert having an internal diffuser for polymer ammunition |
| US10302403B2 (en) | 2016-03-09 | 2019-05-28 | True Velocity Ip Holdings, Llc | Method of making polymer ammunition cartridge having a two-piece primer insert |
| US10302404B2 (en) | 2016-03-09 | 2019-05-28 | True Vilocity IP Holdings, LLC | Method of making polymer ammunition cartridge having a two-piece primer insert |
| US9869536B2 (en) | 2016-03-09 | 2018-01-16 | True Velocity, Inc. | Method of making a two-piece primer insert |
| US10330451B2 (en) | 2016-03-09 | 2019-06-25 | True Velocity, Inc. | Three-piece primer insert having an internal diffuser for polymer ammunition |
| US20190204056A1 (en) | 2016-03-09 | 2019-07-04 | True Velocity Ip Holdings, Llc | Method Of Making Polymer Ammunition Cartridge Having A Two-Piece Primer Insert |
| US10041771B1 (en) | 2016-03-09 | 2018-08-07 | True Velocity, Inc. | Polymer Ammunition having a three-piece primer insert |
| US9518810B1 (en) | 2016-03-09 | 2016-12-13 | True Velocity, Inc. | Polymer ammunition cartridge having a two-piece primer insert |
| US20190212117A1 (en) | 2016-03-09 | 2019-07-11 | True Velocity Ip Holdings, Llc | Method Of Making Polymer Ammunition Cartridge Having A Two-Piece Primer Insert |
| US9964388B1 (en) | 2016-03-09 | 2018-05-08 | True Velocity, Inc. | Polymer ammunition cartridge having a two-piece primer insert |
| US10415943B2 (en) | 2016-03-09 | 2019-09-17 | True Velocity Ip Holdings, Llc | Polymer ammunition cartridge having a three-piece primer insert |
| US9551557B1 (en) | 2016-03-09 | 2017-01-24 | True Velocity, Inc. | Polymer ammunition having a two-piece primer insert |
| US20190242683A1 (en) | 2016-03-09 | 2019-08-08 | True Velocity Ip Holdings, Llc | Method of Making Polymer Ammunition Cartridge Having a Two-Piece Primer Insert |
| US20190242682A1 (en) | 2016-03-09 | 2019-08-08 | True Velocity Ip Holdings, Llc | Method of Making Polymer Ammunition Cartridge Having a Two-Piece Primer Insert |
| US20190106364A1 (en) | 2016-03-28 | 2019-04-11 | Adler Capital Llc | Gas propelled munitions anti-fouling system |
| USD832037S1 (en) | 2016-07-18 | 2018-10-30 | Kenneth John Gallagher | Bottle dispenser base |
| US20190242679A1 (en) | 2016-07-27 | 2019-08-08 | Shell Shock Technologies LLC | Fire Arm Casing for Resisting High Deflagration Pressure |
| USD821536S1 (en) | 2016-08-24 | 2018-06-26 | Silencerco, Llc | Projectile |
| US20180066925A1 (en) | 2016-09-07 | 2018-03-08 | Concurrent Technologies Corporation | Metal Injection Molded Cased Telescoped Ammunition |
| US20180106581A1 (en) | 2016-10-13 | 2018-04-19 | G2 Research Inc. | Predictably Fragmenting Projectiles Having Internally-Arranged Geometric Features |
| US20180292186A1 (en) | 2017-04-07 | 2018-10-11 | Pcp Tactical, Llc | Two-piece insert and/or flash tube for polymer ammunition cartridges |
| US20180306558A1 (en) | 2017-04-19 | 2018-10-25 | Pcp Tactical, Llc | Cartridge case having a neck with increased thickness |
| US20190137243A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137232A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge Nose |
| US20190137244A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137235A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137237A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| WO2019094544A1 (en) | 2017-11-09 | 2019-05-16 | True Velocity Ip Holdings, Llc | Multi-piece polymer ammunition, cartridge and components |
| US20200025536A1 (en) | 2017-11-09 | 2020-01-23 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137231A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge Nose |
| US20190137228A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-piece polymer ammunition cartridge |
| US20190137229A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge Nose |
| US20200025537A1 (en) | 2017-11-09 | 2020-01-23 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition, Cartridge and Components |
| US20190137241A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137233A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge Nose |
| US20190137240A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US10365074B2 (en) | 2017-11-09 | 2019-07-30 | True Velocity Ip Holdings, Llc | Multi-piece polymer ammunition cartridge |
| US20190137239A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US20190137242A1 (en) | 2017-11-09 | 2019-05-09 | True Velocity Ip Holdings, Llc | Multi-Piece Polymer Ammunition Cartridge |
| US10533830B2 (en) | 2017-11-09 | 2020-01-14 | True Velocity Ip Holdings, Llc | Multi-piece polymer ammunition cartridge nose |
| WO2019160742A2 (en) | 2018-02-14 | 2019-08-22 | True Velocity Ip Holdings, Llc | Device and method of determining the force required to remove a projectile from an ammunition cartridge |
| US20190249967A1 (en) | 2018-02-14 | 2019-08-15 | True Velocity Ip Holdings, Llc | Device and Method of Determining the Force Required to Remove a Projectile from an Ammunition Cartridge |
| US20200011645A1 (en) | 2018-07-06 | 2020-01-09 | True Velocity Ip Holdings, Llc | Multi-piece primer insert for polymer ammunition |
| US20200011646A1 (en) | 2018-07-06 | 2020-01-09 | True Velocity Ip Holdings, Llc | Three-piece primer insert for polymer ammunition |
