Et roterbart og styrbart boreverktøy (10) har et bøyelig motor- statorhus (21) og eventuelt et bøyelig lagerhus (19). De bøyelige partier kan ha en redusert ytterdiameter eller øket innerdiameter, og de kan være utført av et materiale med forholdsvis høy flytegrense og lav elastisitetsmodul. Det er også vist en fremgangsmåte for bruk av verktøyet (10) til å bore alle seksjoner (5, 8, 9, 11, 13) av en avviks-brønnboring (3) fra avgreningen til den ønskete skråvinkel i et mål-reservoar. Verktøyet (10) har bare en vinkel, såsom en vinkel-rørdel (14), hvorved det kan rotere for boring av et rett hull og for å øke krumningsradien til et buet hull. Verktøyet (10) har også en fluiddrevet motor (12) som gjør det operabelt i operasjons-glidefasen for boring av en kort krumningsradius. Bøyeligheten gjør det mulig å anvende boreverktøyet (10) rundt krappere kurver, og roterbarheten setter verktøyet istand til å bore i begge operasjons- borefasene for fullføring av alle seksjoner av side-brønnboringen med et : enkelt verktøy.A rotatable and controllable drilling tool (10) has a flexible motor stator housing (21) and optionally a flexible bearing housing (19). The flexible portions may have a reduced outer diameter or increased inner diameter, and may be made of a material with relatively high yield strength and low modulus of elasticity. Also shown is a method of using the tool (10) to drill all sections (5, 8, 9, 11, 13) of a deviation wellbore (3) from the branch to the desired inclination angle in a target reservoir. The tool (10) has only one angle, such as an angular pipe portion (14), whereby it can rotate for drilling a straight hole and for increasing the radius of curvature of a curved hole. The tool (10) also has a fluid driven motor (12) which makes it operable in the operating slip phase for drilling a short radius of curvature. The flexibility makes it possible to use the drilling tool (10) around tighter curves, and the rotatability enables the tool to drill in both operational drilling phases to complete all sections of the side wellbore with a single tool.