Utility model content
In order to solve the above-mentioned technical problem, the utility model provides a kind of air fryer easy to carry, is convenient to removeMigration is dynamic, and will not occur the problem of sliding and injuring customer by a crashing object when carrying, and the practicality is more preferable.
In order to reach the utility model aim, the utility model provides a kind of air fryer easy to carry, including underPortion penetrates through and shell, lower front inner casing, fryer component and bottom cover with second opening of the lower front with the first opening,The inner casing is mounted in the shell, and the bottom cover lid is mounted in the lower part of the shell, and the inner casing includes upper cavity underCavity, second opening communicate on the front side wall of the lower chamber and with first opening, and the fryer component is certainlyFirst opening and second opening are mounted in the lower chamber in which can push and pull；The bottom cover includes bottom cover bottom wall and bottomLid side wall, the bottom cover sidewall slope setting, and the angle formed between the bottom cover side wall and bottom cover bottom wall is 120 ~ 165Degree.
Optionally, the bottom cover side wall extends to form obliquely from the bottom cover bottom wall edge.
Optionally, the bottom cover Sidewall Height is between 25mm to 50mm.
Optionally, attacker's slot is symmetrically arranged at left and right sides of the bottom cover side wall, the notch inclination of attacker's slot is arranged downward.
Optionally, the distance between the inner top surface of attacker's slot and the bottom cover bottom wall are 15 ~ 30mm.
Optionally, the angle formed between the inner top surface and medial surface of attacker's slot is 90 ~ 120 degree.
Optionally, anti-slip part is equipped in attacker's slot, the anti-slip part is for increasing attacker's slot inner surface frictionPower.
Optionally, the anti-slip part is the convex ribs of multiple strips, multiple convex ribs parallel arrangements or arranged in a crossed manner.
Optionally, the anti-slip part is multiple salient points of dispersed placement.
Optionally, the length of attacker's slot is 60 ~ 120mm, width is 15 ~ 40mm, the length of the convex ribs is 30 ~120mm, width and height are 0.5 ~ 3mm.
Compared with prior art, air fryer easy to carry provided by the utility model, including lower part perforation and front sideShell, lower front inner casing, fryer component and bottom cover with second opening of the lower part with the first opening, the inner casing installationIn the shell, the bottom cover lid is mounted in the lower part of the shell, and bottom cover includes bottom cover bottom wall and bottom cover side wall, bottom cover side wallThe angle for being obliquely installed, and being formed between bottom cover side wall and bottom cover bottom wall is 120 ~ 165 degree, and such finger is easier to stretch into bottom coverIn gap between supporting surface where side wall and bottom cover bottom wall, and the upward component bigger that finger is bestowed, it is easier to it holds upAir fryer prevents air fryer from sliding, and is obliquely installed the mode of bottom cover side wall relative to being vertically arranged bottom cover side wallMode is also convenient for moulding when injection molding, also saves raw material when making bottom cover, can reduce the manufacture difficulty and manufacturing cost of bottom cover.If the angle formed between bottom cover side wall and bottom cover bottom wall be less than 120 degree, then bottom cover angle of sides is larger, finger bestow toOn component it is smaller, air fryer is not easy to lift up, is easy to slide；If the angle formed between bottom cover side wall and bottom cover bottom wallDegree is more than 165 degree, then the gap between bottom cover side wall and bottom cover bottom wall place supporting surface is smaller, and finger is not easy to stretch into.
Further, bottom cover side wall extends to form obliquely from bottom cover bottom wall edge, it is ensured that the aesthetics of bottom cover entirety；AndAnd bottom cover side wall and bottom cover bottom wall select injection molding manner integral production at manufacture craft is also simple.
Further, bottom cover Sidewall Height is between 25mm to 50mm so that bottom cover side wall and supporting surface where bottom cover bottom wallBetween formed gap it is relatively reasonable, in this way when carrying air fryer, finger can extend into bottom cover side wall and supporting surfaceBetween hold the lateral surface of bottom cover side wall in the gap that is formed, then palm buttresses the outer surface of shell again, such mode is notCan be in the presence of that air fryer falls off and injures customer by a crashing object when carrying, the practicality is more preferable；If the height of bottom cover side wall is smallWhen 25mm, the gap that is formed between supporting surface where bottom cover side wall and bottom cover bottom wall it is smaller, even if finger is extend between thisAlso it is not easy to exert a force in gap, is unfavorable for carrying air fryer, if the height of bottom cover side wall is more than 50mm, then entire bottom coverVolume it is larger, the connection gap between bottom cover and shell can be made to be in higher position, seriously affect aesthetics.
Further, attacker's slot is symmetrically arranged at left and right sides of bottom cover side wall, the notch inclination of attacker's slot is arranged downward, justIt exerts a force upwards after finger stretches into, more conducively carries air fryer.
Further, attacker's slot is symmetrically arranged at left and right sides of bottom cover side wall, customer carries air fryer by two handsWhen, two hand positions are symmetrical, more effortless；The notch inclination of attacker's slot is arranged downward, is fried more convenient for finger stretches into carry airPot, and it is relatively labor-saving.
Further, the distance between the inner top surface of attacker's slot and bottom cover bottom wall are 15 ~ 30mm, the structure of manufactured bottom coverIt is more beautiful, and finger is also easy to extend into attacker's slot；The distance between the inner top surface of attacker's slot and bottom cover bottom wall are less than15mm, then crossing pinkie because of distance cannot quickly even be not easy to stretch into attacker's slot；The inner top surface of attacker's slot and bottom cover bottomThe distance between wall is more than 30mm, then attacker's groove location is excessively high, and the structure of bottom cover is unsightly.
Further, the angle formed between the inner top surface and medial surface of attacker's slot is 90 ~ 120 degree, it is ensured that finger stretches intoThere is best feel during carrying air fryer after attacker's slot；The angle formed between the inner top surface and medial surface of attacker's slotDegree is less than 90 degree and does not either meet ergonomics optimal design more than 120 degree, and air is carried after finger stretches into attacker's slotFeel can decline during fryer.
Further, anti-slip part is equipped in attacker's slot, finger is stretched into attacker's slot and held in the palm in anti-slip part, can increase handRefer to the frictional force between the cell wall of attacker's slot, effectively prevent finger slippage, is more advantageous to customer and carries air fryer.
Further, the length of attacker's slot 31 is 60 ~ 120mm（It is preferred that 60 ~ 80mm）, width be 15 ~ 40mm（It is preferred that 20 ~30mm）, it is adapted to the palmus degree and hand joint length of ordinary people, more seems beautiful.
Further, anti-slip part is the convex ribs of multiple strips, and the length of convex ribs is 30 ~ 120mm, is more than attacker's slot 31 1As length so that customer be not easy hold to shiny surface, width and highly be 0.5 ~ 3mm, fin height is excessively high to be influencedHolding feel, experience is poor, and fin height is too small not to have antiskid effect.
Other features and advantages of the utility model will illustrate in the following description, also, partly from specificationIn become apparent, or understood by implementing the utility model.The purpose of this utility model and other advantages can pass throughSpecifically noted structure is realized and is obtained in specification, claims and attached drawing.
Specific implementation mode
To make the purpose of this utility model, technical solution and advantage be more clearly understood, below in conjunction with attached drawing to thisThe embodiment of utility model is described in detail.It should be noted that in the absence of conflict, the implementation in the utility modelFeature in example and embodiment mutually can be combined arbitrarily.
Many details are elaborated in the following description in order to fully understand the utility model, still, this practicalityIt is novel to be implemented different from mode described here using other, therefore, the scope of protection of the utility model not byThe limitation of following public specific embodiment.
The air fryer easy to carry of some embodiments of the utility model is described below in conjunction with the accompanying drawings.
The air fryer easy to carry of the present embodiment, as shown in Figures 1 to 4, including lower part perforation and lower front toolThere are the shell 1 of the first opening 11, lower front that there is inner casing 7, fryer component 2 and the bottom cover 3 of the second opening, the inner casing 7 to pacifyIn the shell 1, for the lid of the bottom cover 3 mounted in the lower part of the shell 1, the inner casing 7 includes upper cavity 71 and lower chamber72, second opening communicates on the front side wall of the lower chamber 72 and with first opening 11, the fryer component2 are mounted in the lower chamber 72 in which can push and pull from first opening 11 and second opening；As shown in figure 3, the bottomLid 3 includes bottom cover bottom wall 35 and bottom cover sidewall 34, and the bottom cover sidewall 34 is obliquely installed, and bottom cover sidewall 34 and bottom cover bottom wall 35Between the angle that is formed be 135 degree, finger is easier to stretch into the gap between bottom cover sidewall 34 and supporting surface, and finger is appliedThe upward component bigger given, it is easier to hold up air fryer, prevent air fryer from sliding.Certainly, angle can also be 120Degree, 140 degree or 165 degree, achievable the purpose of this utility model, objective without departing from the utility model design philosophy,This is repeated no more, and all should belong to the protection range of the utility model interior.
In the present embodiment, bottom cover sidewall 34 height is 30mm.Since bottom cover sidewall 34 is obliquely installed, and bottom cover sidewall 34Height between 25mm between 50mm, therefore in this way when carrying air fryer, finger can extend into bottom cover sidewall 34 withThe lateral surface of bottom cover sidewall 34 is held in the gap formed between supporting surface, then palm buttresses the outer surface of shell 1 again, thisThe upward component that kind mode finger is bestowed is larger, will not be in the presence of that air fryer falls off and injures customer by a crashing object when carrying,The practicality is more preferable；And the mode for being obliquely installed bottom cover sidewall 34 is also convenient for relative to the mode for being vertically arranged bottom cover sidewall 34Moulding when injection molding, also saves raw material when making bottom cover 3, can reduce the manufacture difficulty and manufacturing cost of bottom cover 3.
Wherein, the fryer component 2 includes panel 21, fryer, fried blue and handle 22, and handle 22 passes through company with fried blue phaseFishplate bar is fixed together；Display screen 4 is provided on shell 1, display screen 4 is located at the top of the first opening 11.In handle 22Lower part be provided with grab, fryer corresponding position is provided with the snap groove corresponding to grab, complains and quarrel loudly when being combined with fry basket connection, blocksFastener enters in snap groove, and fryer and fry basket is made to be fixed together, and with that 22 can be easy to fryer of taking by doing and illustrating, culinary art is facilitated to graspMake；Handle 22 is provided with the button that control fryer is detached with fry basket above, and button links with grab, by lower button, grab and buttonAccess slot is detached from, and handle 22 can drive fry basket to be separated on fryer.
Handle 22 is in inverted l shape, and the upper surface of handle 22 is plane, and a through-hole is offered in plane, and button setting existsIn through-hole, it is bonded the protective cover for being provided on handle 22 and covering button.
The bottom cover sidewall 34 and the bottom cover bottom wall 35 are an integral structure, and the bottom cover sidewall 34 is from the bottom cover bottom35 edge of wall extends to form obliquely, and manufacture craft is simple, can be fabricated to by injection molding manner.
As shown in Figure 1, the angle formed between the bottom cover sidewall 34 and bottom cover bottom wall 35 is 135 degree.
As shown in Figure 1 to Figure 3, attacker's slot 31, the slot of attacker's slot 31 are symmetrically arranged at left and right sides of the bottom cover sidewall 34Mouth tilts to be arranged downward.
It is symmetrical arranged at left and right sides of bottom cover sidewall 34 there are two attacker's slot 31, the notch of two attacker's slots 31 tilts court and divides intoIt sets, carries air fryer more convenient for the finger of two hands stretches into, and relatively labor-saving, it is fried more conducively to carry mobile airPot.
As shown in figures 1 and 3, the distance between the inner top surface of attacker's slot 31 and the bottom cover bottom wall 35 are 20mm,Ensure that finger can smoothly stretch into attacker's slot 31, more conducively carries air fryer.
Certainly, the distance between the inner top surface of attacker's slot 31 and bottom cover bottom wall 35 can also be 15mm, 25cm, 30cm etc.,The purpose of this utility model can be achieved, objective is without departing from the design philosophy of the utility model, and details are not described herein, should all belong toIn in the scope of protection of the utility model.
As shown in Figure 1 to Figure 3, the angle formed between the inner top surface and medial surface of attacker's slot 31 is 90 degree, it is ensured thatFinger stretches into after attacker's slot 31 carry air fryer during there is best feel.
Certainly, the angle formed between the inner top surface and medial surface of attacker's slot 31 can also be 100 degree, 110 degree eitherMore than 120 degree, can be achieved the purpose of this utility model, objective without departing from the utility model design philosophy, herein no longerIt repeats, all should belong to the protection range of the utility model interior.
Anti-slip part 32 is equipped in attacker's slot 31, the anti-slip part 32 is for increasing 31 inner surface friction of attacker's slotPower.
Anti-slip part 32 is equipped in attacker's slot 31, finger is stretched into attacker's slot 31 and held in the palm in anti-slip part 32, can increase handRefer to the frictional force between the cell wall of attacker's slot 31, effectively prevent finger slippage, is better protected from air fryer landing.
Wherein, as depicted in figs. 1 and 2, the anti-slip part 32 is the convex ribs of multiple strips, multiple convex ribs parallel arrangement orIt is arranged in a crossed manner, and the length of attacker's slot 31 is 80mm, width 30mm, is adapted to the palmus degree and hand joint of ordinary peopleLength；The length of the convex ribs is 50mm（More than 31 general length of attacker's slot so that customer, which is not easy to hold, arrives shiny surface）、Width and height are 2mm, and fin height is excessively high to influence holding feel, and experience is poor, fin height is too small do not have it is anti-skiddingEffect.
Certainly, the length of attacker's slot can also be 60mm, 90mm, 120mm etc., width 15mm, 40mm etc.；The length of convex ribsDegree can also be 40mm, 80mm etc., highly can also be 0.5mm, 1mm, 3mm etc.；The purpose of this utility model can be achieved,Objective is without departing from the design philosophy of the utility model, and details are not described herein, all should belong to the protection range of the utility model interior.
Either, the anti-slip part 32 is multiple salient points of dispersed placement（It can refer to shown in Fig. 3）, multiple bump designs atMatrix type structure etc.；The purpose of this utility model can be achieved in both examples above, and objective is without departing from the utility modelDesign philosophy, details are not described herein, all should belong to the protection range of the utility model interior.
The rear portion of bottom cover 3 is provided with the heat emission hole 33 of cold air, and shell 1 is an integral structure hood-like.Bottom cover sidewall 34Upper end be aligned with the lower end of shell 1.
As shown in figure 4, being provided with hot air apparatus 5 in the upper cavity 71, the hot air apparatus 5 includes heating element, windFan 52 and motor, the heating element include snail electrothermal tube 51, and the fan 52 is set to the snail electric heatingThe top of pipe 51, and the fan 52 includes blade and lower blade, lower blade is used for blowing hot-air, and blade is used for cooling airThe control unit 6 of fryer, the control unit 6 include master control borad, and master control borad is by the rotation of SCR control motor, to driveFan 52 rotates, and thermal cut-off is electrically connected with master control borad, and thermal cut-off is close to the setting of snail electrothermal tube 51, when being abnormalWhen, thermal cut-off can fuse at the first time, and product safety is effectively ensured.
It is understood that bottom cover sidewall 34 height can also be 25mm, 28mm, 32mm, 35mm, 40mm, 43mm, 48mmOr 50mm, as long as between 25mm between 50mm, capable of realizing that finger easily extend into bottom cover sidewall 34 and bottom cover bottom wallThe lateral surface of bottom cover sidewall 34 is held in the gap formed between the supporting surface of place.
In conclusion air fryer easy to carry provided by the utility model, the setting of bottom cover sidewall slope, and bottom cover sideThe height of wall is not less than 25mm, and in this way when carrying air fryer, finger can extend into shape between bottom cover side wall and supporting surfaceAt gap in and hold the lateral surface of bottom cover side wall, then palm buttresses the outer surface of shell again, and such mode will not removeIt is in the presence of that air fryer falls off and injures customer by a crashing object when fortune, the practicality is more preferable；And it is obliquely installed the mode of bottom cover side wallIt is also convenient for moulding when injection molding relative to the mode for being vertically arranged bottom cover side wall, also raw material is saved when making bottom cover, can reduceThe manufacture difficulty and manufacturing cost of bottom cover.
Term " installation ", " connected ", " connection ", " fixation " etc. shall be understood in a broad sense in the description of the present invention,For example, " connection " may be fixed connection or may be dismantle connection, or integral connection；It can be directly connected, also may be usedWith indirectly connected through an intermediary.For the ordinary skill in the art, can understand as the case may be above-mentionedThe concrete meaning of term in the present invention.
In the description of this specification, the description of term " one embodiment ", " some embodiments ", " specific embodiment " etc.Mean that particular features, structures, materials, or characteristics described in conjunction with this embodiment or example are contained at least the one of the utility modelIn a embodiment or example.In the present specification, schematic expression of the above terms are not necessarily referring to identical embodimentOr example.Moreover, the particular features, structures, materials, or characteristics of description can be in any one or more embodiments or exampleIn can be combined in any suitable manner.
Although the embodiment disclosed by the utility model is as above, the content only the utility model for ease of understandingAnd the embodiment used, it is not limited to the utility model.Technical staff in any the utility model fields,Under the premise of not departing from the spirit and scope disclosed by the utility model, it can be carried out in the form and details of implementation anyModification and variation, but the scope of patent protection of the utility model, still should be subject to the scope of the claims as defined in the appended claims.