Movatterモバイル変換

This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.

DESCRIPTION top

Thestrptime() function shall convert the character string pointed to bybuf to values which are stored in thetmstructure pointed to bytm, using the format specified byformat. The format is composed of zero or more directives. Each directive is composed of one of the following: one or more white-space characters (as specified byisspace()); an ordinary character (neither'%'nor a white-space character); or a conversion specification. Each conversion specification is introduced by the'%'character after which the following appear in sequence: * An optional flag, the zero character ('0') or the <plus-sign> character ('+'), which is ignored. * An optional field width. If a field width is specified, it shall be interpreted as a string of decimal digits that will determine the maximum number of bytes converted for the conversion rather than the number of bytes specified below in the description of the conversion specifiers. * An optionalEorOmodifier. * A terminating conversion specifier character that indicates the type of conversion to be applied. The conversions are determined using theLC_TIME category of the current locale. The application shall ensure that there is white- space or other non-alphanumeric characters between any two conversion specifications unless all of the adjacent conversion specifications convert a known, fixed number of characters. In the following list, the maximum number of characters scanned (excluding the one matching the next directive) is as follows: * If a maximum field width is specified, then that number * Otherwise, the pattern"{x}"indicates that the maximum isx * Otherwise, the pattern"[x,y]"indicates that the value shall fall within the range given (both bounds being inclusive), and the maximum number of characters scanned shall be the maximum required to represent any value in the range without leading zeros and without a leading <plus-sign> The following conversion specifiers are supported. The results are unspecified if a modifier is specified with a flag or with a minimum field width, or if a field width is specified for any conversion specifier other thanCorY. a The day of the week, using the locale's weekday names; either the abbreviated or full name may be specified. A Equivalent to%a. b The month, using the locale's month names; either the abbreviated or full name may be specified. B Equivalent to%b. c Replaced by the locale's appropriate date and time representation. C All but the last two digits of the year {2}; leading zeros shall be permitted but shall not be required. A leading'+'or'-'character shall be permitted before any leading zeros but shall not be required. d The day of the month [01,31]; leading zeros shall be permitted but shall not be required. D The date as%m/%d/%y. e Equivalent to%d. h Equivalent to%b. H The hour (24-hour clock) [00,23]; leading zeros shall be permitted but shall not be required. I The hour (12-hour clock) [01,12]; leading zeros shall be permitted but shall not be required. j The day number of the year [001,366]; leading zeros shall be permitted but shall not be required. m The month number [01,12]; leading zeros shall be permitted but shall not be required. M The minute [00,59]; leading zeros shall be permitted but shall not be required. n Any white space. p The locale's equivalent of a.m. or p.m. r 12-hour clock time using the AM/PM notation ift_fmt_ampm is not an empty string in theLC_TIME portion of the current locale; in the POSIX locale, this shall be equivalent to%I:%M:%S %p. R The time as%H:%M. S The seconds [00,60]; leading zeros shall be permitted but shall not be required. t Any white space. T The time as%H:%M:%S. U The week number of the year (Sunday as the first day of the week) as a decimal number [00,53]; leading zeros shall be permitted but shall not be required. w The weekday as a decimal number [0,6], with 0 representing Sunday. W The week number of the year (Monday as the first day of the week) as a decimal number [00,53]; leading zeros shall be permitted but shall not be required. x The date, using the locale's date format. X The time, using the locale's time format. y The last two digits of the year. Whenformat contains neither aCconversion specifier nor aYconversion specifier, values in the range [69,99] shall refer to years 1969 to 1999 inclusive and values in the range [00,68] shall refer to years 2000 to 2068 inclusive; leading zeros shall be permitted but shall not be required. A leading'+'or'-'character shall be permitted before any leading zeros but shall not be required.Note:It is expected that in a future version of this standard the default century inferred from a 2-digit year will change. (This would apply to all commands accepting a 2-digit year as input.) Y The full year {4}; leading zeros shall be permitted but shall not be required. A leading'+'or'-'character shall be permitted before any leading zeros but shall not be required. % Replaced by%.Modified Conversion Specifiers Some conversion specifiers can be modified by theEandOmodifier characters to indicate that an alternative format or specification should be used rather than the one normally used by the unmodified conversion specifier. If the alternative format or specification does not exist in the current locale, the behavior shall be as if the unmodified conversion specification were used. %Ec The locale's alternative appropriate date and time representation. %EC The name of the base year (period) in the locale's alternative representation. %Ex The locale's alternative date representation. %EX The locale's alternative time representation. %Ey The offset from%EC(year only) in the locale's alternative representation. %EY The full alternative year representation. %Od The day of the month using the locale's alternative numeric symbols; leading zeros shall be permitted but shall not be required. %Oe Equivalent to%Od. %OH The hour (24-hour clock) using the locale's alternative numeric symbols. %OI The hour (12-hour clock) using the locale's alternative numeric symbols. %Om The month using the locale's alternative numeric symbols. %OM The minutes using the locale's alternative numeric symbols. %OS The seconds using the locale's alternative numeric symbols. %OU The week number of the year (Sunday as the first day of the week) using the locale's alternative numeric symbols. %Ow The number of the weekday (Sunday=0) using the locale's alternative numeric symbols. %OW The week number of the year (Monday as the first day of the week) using the locale's alternative numeric symbols. %Oy The year (offset from%C) using the locale's alternative numeric symbols. A conversion specification composed of white-space characters is executed by scanning input up to the first character that is not white-space (which remains unscanned), or until no more characters can be scanned. A conversion specification that is an ordinary character is executed by scanning the next character from the buffer. If the character scanned from the buffer differs from the one comprising the directive, the directive fails, and the differing and subsequent characters remain unscanned. A series of conversion specifications composed of%n,%t, white- space characters, or any combination is executed by scanning up to the first character that is not white space (which remains unscanned), or until no more characters can be scanned. Any other conversion specification is executed by scanning characters until a character matching the next directive is scanned, or until no more characters can be scanned. These characters, except the one matching the next directive, are then compared to the locale values associated with the conversion specifier. If a match is found, values for the appropriatetm structure members are set to values corresponding to the locale information. Case is ignored when matching items inbuf such as month or weekday names. If no match is found,strptime() fails and no more characters are scanned.

EXAMPLES top

Convert a Date-Plus-Time String to Broken-Down Time and Then intoSeconds The following example demonstrates the use ofstrptime() to convert a string into broken-down time. The broken-down time is then converted into seconds since the Epoch usingmktime(). #include <time.h> ... struct tm tm; time_t t; if (strptime("6 Dec 2001 12:33:45", "%d %b %Y %H:%M:%S", &tm) == NULL) /* Handle error */; printf("year: %d; month: %d; day: %d;\n", tm.tm_year, tm.tm_mon, tm.tm_mday); printf("hour: %d; minute: %d; second: %d\n", tm.tm_hour, tm.tm_min, tm.tm_sec); printf("week day: %d; year day: %d\n", tm.tm_wday, tm.tm_yday); tm.tm_isdst = -1; /* Not set by strptime(); tells mktime() to determine whether daylight saving time is in effect */ t = mktime(&tm); if (t == -1) /* Handle error */; printf("seconds since the Epoch: %ld\n", (long) t);"

APPLICATION USAGE top

Several ``equivalent to'' formats and the special processing of white-space characters are provided in order to ease the use of identicalformat strings forstrftime() andstrptime(). It should be noted that dates constructed by thestrftime() function with the%Yor%C%yconversion specifiers may have values larger than 9999. If thestrptime() function is used to read such values using%C%yor%Y, the year values will be truncated to four digits. Applications should use%+w%yor%+xYwithw andx set large enough to contain the full value of any years that will be printed or scanned. See also the APPLICATION USAGE section instrftime(3p). It is unspecified whether multiple calls tostrptime() using the sametmstructure will update the current contents of the structure or overwrite all contents of the structure. Conforming applications should make a single call tostrptime() with a format and all data needed to completely specify the date and time being converted.

Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online athttp://www.opengroup.org/unix/online.html . Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, seehttps://www.kernel.org/doc/man-pages/reporting_bugs.html .IEEE/The Open Group 2017STRPTIME(3P)