HTML rendering created 2025-09-06 byMichael Kerrisk, author ofThe Linux Programming Interface. For details of in-depthLinux/UNIX system programming training courses that I teach, lookhere. Hosting byjambit GmbH. |  |
PCRE2SYNTAX(3) Library Functions ManualPCRE2SYNTAX(3)PCRE2 - Perl-compatible regular expressions (revised API)
The full syntax and semantics of the regular expression patterns that are supported by PCRE2 are described in thepcre2pattern documentation. This document contains a quick-reference summary of the pattern syntax followed by the syntax of replacement strings in substitution function. The full description of the latter is in thepcre2apidocumentation.
\x where x is non-alphanumeric is a literal x \Q...\E treat enclosed characters as literal Note that white space inside \Q...\E is always treated as literal, even if PCRE2_EXTENDED is set, causing most other white space to be ignored. Note also that PCRE2's handling of \Q...\E has some differences from Perl's. See thepcre2patterndocumentation for details.
With one exception, wherever brace characters { and } are required to enclose data for constructions such as \g{2} or \k{name}, space and/or horizontal tab characters that follow { or precede } are allowed and are ignored. In the case of quantifiers, they may also appear before or after the comma. The exception is \u{...} which is not Perl-compatible and is recognized only when PCRE2_EXTRA_ALT_BSUX is set. This is an ECMAScript compatibility feature, and follows ECMAScript's behaviour. This table applies to ASCII and Unicode environments. An unrecognized escape sequence causes an error. \a alarm, that is, the BEL character (hex 07) \cx "control-x", where x is a non-control ASCII character \e escape (hex 1B) \f form feed (hex 0C) \n newline (hex 0A) \r carriage return (hex 0D) \t tab (hex 09) \0dd character with octal code 0dd \ddd character with octal code ddd, or backreference \o{ddd..} character with octal code ddd.. \N{U+hh..} character with Unicode code point hh.. (Unicode mode only) \xhh character with hex code hh \x{hh..} character with hex code hh.. \N{U+hh..} is synonymous with \x{hh..} but is not supported in environments that use EBCDIC code (mainly IBM mainframes). Note that \N not followed by an opening curly bracket has a different meaning (see below). If PCRE2_ALT_BSUX or PCRE2_EXTRA_ALT_BSUX is set ("ALT_BSUX mode"), the following are also recognized: \U the character "U" \uhhhh character with hex code hhhh \u{hh..} character with hex code hh.. but only for EXTRA_ALT_BSUX When \x is not followed by {, one or two hexadecimal digits are read, but in ALT_BSUX mode \x must be followed by two hexadecimal digits to be recognized as a hexadecimal escape; otherwise it matches a literal "x". Likewise, if \u (in ALT_BSUX mode) is not followed by four hexadecimal digits or (in EXTRA_ALT_BSUX mode) a sequence of hex digits in curly brackets, it matches a literal "u". Note that \0dd is always an octal code. The treatment of backslash followed by a non-zero digit is complicated; for details see the section "Non-printing characters" in thepcre2pattern documentation, where details of escape processing in EBCDIC environments are also given. . any character except newline; in dotall mode, any character whatsoever \C one code unit, even in UTF mode (best avoided) \d a decimal digit \D a character that is not a decimal digit \h a horizontal white space character \H a character that is not a horizontal white space character \N a character that is not a newline \p{xx} a character with thexx property \P{xx} a character without thexx property \R a newline sequence \s a white space character \S a character that is not a white space character \v a vertical white space character \V a character that is not a vertical white space character \w a "word" character \W a "non-word" character \X a Unicode extended grapheme cluster \C is dangerous because it may leave the current matching point in the middle of a UTF-8 or UTF-16 character. The application can lock out the use of \C by setting the PCRE2_NEVER_BACKSLASH_C option. It is also possible to build PCRE2 with the use of \C permanently disabled. By default, \d, \s, and \w match only ASCII characters, even in UTF-8 mode or in the 16-bit and 32-bit libraries. However, if locale-specific matching is happening, \s and \w may also match characters with code points in the range 128-255. If the PCRE2_UCP option is set, the behaviour of these escape sequences is changed to use Unicode properties and they match many more characters, but there are some option settings that can restrict individual sequences to matching only ASCII characters. Property descriptions in \p and \P are matched caselessly; hyphens, underscores, and ASCII white space characters are ignored, in accordance with Unicode's "loose matching" rules. For example, \p{Bidi_Class=al} is the same as \p{ bidi class = AL }.C Other Cc Control Cf Format Cn Unassigned Co Private use Cs Surrogate L Letter Lc Cased letter, the union of Ll, Lu, and Lt L& Synonym of Lc Ll Lower case letter Lm Modifier letter Lo Other letter Lt Title case letter Lu Upper case letter M Mark Mc Spacing mark Me Enclosing mark Mn Non-spacing mark N Number Nd Decimal number Nl Letter number No Other number P Punctuation Pc Connector punctuation Pd Dash punctuation Pe Close punctuation Pf Final punctuation Pi Initial punctuation Po Other punctuation Ps Open punctuation S Symbol Sc Currency symbol Sk Modifier symbol Sm Mathematical symbol So Other symbol Z Separator Zl Line separator Zp Paragraph separator Zs Space separator From release 10.45, when caseless matching is set, Ll, Lu, and Lt are all equivalent to Lc.
Xan Alphanumeric: union of properties L and N Xps POSIX space: property Z or tab, NL, VT, FF, CR Xsp Perl space: property Z or tab, NL, VT, FF, CR Xuc Universally-named character: one that can be represented by a Universal Character Name Xwd Perl word: property Xan or underscore Perl and POSIX space are now the same. Perl added VT to its space character set at release 5.18.
Unicode defines a number of binary properties, that is, properties whose only values are true or false. You can obtain a list of those that are recognized by \p and \P, along with their abbreviations, by running this command: pcre2test -LP
Many script names and their 4-letter abbreviations are recognized in \p{sc:...} or \p{scx:...} items, or on their own with \p (and also \P of course). You can obtain a list of these scripts by running this command: pcre2test -LS \p{Bidi_Class:<class>} matches a character with the given class \p{BC:<class>} matches a character with the given class The recognized classes are: AL Arabic letter AN Arabic number B paragraph separator BN boundary neutral CS common separator EN European number ES European separator ET European terminator FSI first strong isolate L left-to-right LRE left-to-right embedding LRI left-to-right isolate LRO left-to-right override NSM non-spacing mark ON other neutral PDF pop directional format PDI pop directional isolate R right-to-left RLE right-to-left embedding RLI right-to-left isolate RLO right-to-left override S segment separator WS white space[...] positive character class [^...] negative character class [x-y] range (can be used for hex characters) [[:xxx:]] positive POSIX named set [[:^xxx:]] negative POSIX named set alnum alphanumeric alpha alphabetic ascii 0-127 blank space or tab cntrl control character digit decimal digit graph printing, excluding space lower lower case letter print printing, including space punct printing, excluding alphanumeric space white space upper upper case letter word same as \w xdigit hexadecimal digit In PCRE2, POSIX character set names recognize only ASCII characters by default, but some of them use Unicode properties if PCRE2_UCP is set. You can use \Q...\E inside a character class. When PCRE2_ALT_EXTENDED_CLASS is set, UTS#18 extended character classes may be used, allowing nested character classes, combined using set operators. [x&&[^y]] UTS#18 extended character class x||y set union (OR) x&&y set intersection (AND) x--y set difference (AND NOT) x~~y set symmetric difference (XOR)
(?[...]) Perl extended character class (?[\p{Thai} & \p{Nd}]) operators; white space ignored (?[(x - y) & z]) parentheses for grouping (?[ [^3] & \p{Nd} ]) [...] is a nested ordinary class (?[ [:alpha:] - [z] ]) POSIX set is allowed outside [...] (?[ \d - [3] ]) backslash-escaped set is allowed outside [...] (?[ !\n & [:ascii:] ]) backslash-escaped character is allowed outside [...] all other characters or ranges must be enclosed in [...] x|y, x+y set union (OR) x&y set intersection (AND) x-y set difference (AND NOT) x^y set symmetric difference (XOR) !x set complement (NOT) Inside a Perl extended character class, [...] switches mode to be interpreted as an ordinary character class. Outside of a nested [...], the only items permitted are backslash-escapes, POSIX sets, operators, and parentheses. Inside a nested ordinary class, ^ has its usual meaning (inverts the class when used as the first character); outside of a nested class, ^ is the XOR operator. ? 0 or 1, greedy ?+ 0 or 1, possessive ?? 0 or 1, lazy * 0 or more, greedy *+ 0 or more, possessive *? 0 or more, lazy + 1 or more, greedy ++ 1 or more, possessive +? 1 or more, lazy {n} exactly n {n,m} at least n, no more than m, greedy {n,m}+ at least n, no more than m, possessive {n,m}? at least n, no more than m, lazy {n,} n or more, greedy {n,}+ n or more, possessive {n,}? n or more, lazy {,m} zero up to m, greedy {,m}+ zero up to m, possessive {,m}? zero up to m, lazy\b word boundary \B not a word boundary ^ start of subject also after an internal newline in multiline mode (after any newline if PCRE2_ALT_CIRCUMFLEX is set) \A start of subject $ end of subject also before newline at end of subject also before internal newline in multiline mode \Z end of subject also before newline at end of subject \z end of subject \G first matching position in subject
\K set reported start of match From release 10.38 \K is not permitted by default in lookaround assertions, for compatibility with Perl. However, if the PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK option is set, the previous behaviour is re-enabled. When this option is set, \K is honoured in positive assertions, but ignored in negative ones.
expr|expr|expr...
(...) capture group (?<name>...) named capture group (Perl) (?'name'...) named capture group (Perl) (?P<name>...) named capture group (Python) (?:...) non-capture group (?|...) non-capture group; reset group numbers for capture groups in each alternative In non-UTF modes, names may contain underscores and ASCII letters and digits; in UTF modes, any Unicode letters and Unicode decimal digits are permitted. In both cases, a name must not start with a digit.
(?>...) atomic non-capture group (*atomic:...) atomic non-capture group
(?#....) comment (not nestable)
Changes of these options within a group are automatically cancelled at the end of the group. (?a) all ASCII options (?aD) restrict \d to ASCII in UCP mode (?aS) restrict \s to ASCII in UCP mode (?aW) restrict \w to ASCII in UCP mode (?aP) restrict all POSIX classes to ASCII in UCP mode (?aT) restrict POSIX digit classes to ASCII in UCP mode (?i) caseless (?J) allow duplicate named groups (?m) multiline (?n) no auto capture (?r) restrict caseless to either ASCII or non-ASCII (?s) single line (dotall) (?U) default ungreedy (lazy) (?x) ignore white space except in classes or \Q...\E (?xx) as (?x) but also ignore space and tab in classes (?-...) unset the given option(s) (?^) unset imnrsx options (?aP) implies (?aT) as well, though this has no additional effect. However, it means that (?-aP) also implies (?-aT) and disables all ASCII restrictions for POSIX classes. Unsetting x or xx unsets both. Several options may be set at once, and a mixture of setting and unsetting such as (?i-x) is allowed, but there may be only one hyphen. Setting (but no unsetting) is allowed after (?^ for example (?^in). An option setting may appear at the start of a non-capture group, for example (?i:...). The following are recognized only at the very start of a pattern or after one of the newline or \R sequences or options with similar syntax. More than one of them may appear. For the first three, d is a decimal number. (*LIMIT_DEPTH=d) set the backtracking limit to d (*LIMIT_HEAP=d) set the heap size limit to d * 1024 bytes (*LIMIT_MATCH=d) set the match limit to d (*CASELESS_RESTRICT) set PCRE2_EXTRA_CASELESS_RESTRICT when matching (*NOTEMPTY) set PCRE2_NOTEMPTY when matching (*NOTEMPTY_ATSTART) set PCRE2_NOTEMPTY_ATSTART when matching (*NO_AUTO_POSSESS) no auto-possessification (PCRE2_NO_AUTO_POSSESS) (*NO_DOTSTAR_ANCHOR) no .* anchoring (PCRE2_NO_DOTSTAR_ANCHOR) (*NO_JIT) disable JIT optimization (*NO_START_OPT) no start-match optimization (PCRE2_NO_START_OPTIMIZE) (*TURKISH_CASING) set PCRE2_EXTRA_TURKISH_CASING when matching (*UTF) set appropriate UTF mode for the library in use (*UCP) set PCRE2_UCP (use Unicode properties for \d etc) Note that LIMIT_DEPTH, LIMIT_HEAP, and LIMIT_MATCH can only reduce the value of the limits set by the caller ofpcre2_match()orpcre2_dfa_match(), not increase them. LIMIT_RECURSION is an obsolete synonym for LIMIT_DEPTH. The application can lock out the use of (*UTF) and (*UCP) by setting the PCRE2_NEVER_UTF or PCRE2_NEVER_UCP options, respectively, at compile time.
These are recognized only at the very start of the pattern or after option settings with a similar syntax. (*CR) carriage return only (*LF) linefeed only (*CRLF) carriage return followed by linefeed (*ANYCRLF) all three of the above (*ANY) any Unicode newline sequence (*NUL) the NUL character (binary zero)
These are recognized only at the very start of the pattern or after option setting with a similar syntax. (*BSR_ANYCRLF) CR, LF, or CRLF (*BSR_UNICODE) any Unicode newline sequence
(?=...) ) (*pla:...) ) positive lookahead (*positive_lookahead:...) ) (?!...) ) (*nla:...) ) negative lookahead (*negative_lookahead:...) ) (?<=...) ) (*plb:...) ) positive lookbehind (*positive_lookbehind:...) ) (?<!...) ) (*nlb:...) ) negative lookbehind (*negative_lookbehind:...) ) Each top-level branch of a lookbehind must have a limit for the number of characters it matches. If any branch can match a variable number of characters, the maximum for each branch is limited to a value set by the caller ofpcre2_compile()or defaulted. The default is set when PCRE2 is built (ultimate default 255). If every branch matches a fixed number of characters, the limit for each branch is 65535 characters.
These assertions are specific to PCRE2 and are not Perl- compatible. (?*...) ) (*napla:...) ) synonyms (*non_atomic_positive_lookahead:...) ) (?<*...) ) (*naplb:...) ) synonyms (*non_atomic_positive_lookbehind:...) )
This feature is not Perl-compatible. (*scan_substring:(grouplist)...) scan captured substring (*scs:(grouplist)...) scan captured substring The comma-separated list "grouplist" may identify groups in any of the following ways: n absolute reference +n relative reference -n relative reference <name> name 'name' name
(*script_run:...) ) script run, can be backtracked into (*sr:...) ) (*atomic_script_run:...) ) atomic script run (*asr:...) )
\n reference by number (can be ambiguous) \gn reference by number \g{n} reference by number \g+n relative reference by number (PCRE2 extension) \g-n relative reference by number \g{+n} relative reference by number (PCRE2 extension) \g{-n} relative reference by number \k<name> reference by name (Perl) \k'name' reference by name (Perl) \g{name} reference by name (Perl) \k{name} reference by name (.NET) (?P=name) reference by name (Python)(?R) recurse whole pattern (?n) call subroutine by absolute number (?+n) call subroutine by relative number (?-n) call subroutine by relative number (?&name) call subroutine by name (Perl) (?P>name) call subroutine by name (Python) \g<name> call subroutine by name (Oniguruma) \g'name' call subroutine by name (Oniguruma) \g<n> call subroutine by absolute number (Oniguruma) \g'n' call subroutine by absolute number (Oniguruma) \g<+n> call subroutine by relative number (PCRE2 extension) \g'+n' call subroutine by relative number (PCRE2 extension) \g<-n> call subroutine by relative number (PCRE2 extension) \g'-n' call subroutine by relative number (PCRE2 extension) The variants using parentheses (?...) may also specify a list of capture groups to return, which shall be retained in the calling subexpression if set during the recursion (this feature is not supported by Perl). (?R(grouplist)) recurse whole pattern, returning capture groups (PCRE2 extension) (?n(grouplist)) ) (?+n(grouplist)) ) call subroutine, returning capture groups (?-n(grouplist)) ) (PCRE2 extension) (?&name(grouplist)) ) (?P>name(grouplist)) ) The comma-separated list "grouplist" uses the same syntax as (*scan_substring:(grouplist)...), and may identify groups in any of the following ways: n absolute reference +n relative reference -n relative reference <name> name 'name' name
(?(condition)yes-pattern) (?(condition)yes-pattern|no-pattern) (?(n) absolute reference condition (?(+n) relative reference condition (PCRE2 extension) (?(-n) relative reference condition (PCRE2 extension) (?(<name>) named reference condition (Perl) (?('name') named reference condition (Perl) (?(name) named reference condition (PCRE2, deprecated) (?(R) overall recursion condition (?(Rn) specific numbered group recursion condition (?(R&name) specific named group recursion condition (?(DEFINE) define groups for reference (?(VERSION[>]=n.m) test PCRE2 version (?(assert) assertion condition Note the ambiguity of (?(R) and (?(Rn) which might be named reference conditions or recursion tests. Such a condition is interpreted as a reference condition if the relevant named group exists.All backtracking control verbs may be in the form (*VERB:NAME). For (*MARK) the name is mandatory, for the others it is optional. (*SKIP) changes its behaviour if :NAME is present. The others just set a name for passing back to the caller, but this is not a name that (*SKIP) can see. The following act immediately they are reached: (*ACCEPT) force successful match (*FAIL) force backtrack; synonym (*F) (*MARK:NAME) set name to be passed back; synonym (*:NAME) The following act only when a subsequent match failure causes a backtrack to reach them. They all force a match failure, but they differ in what happens afterwards. Those that advance the start- of-match point do so only if the pattern is not anchored. (*COMMIT) overall failure, no advance of starting point (*PRUNE) advance to next starting character (*SKIP) advance to current matching position (*SKIP:NAME) advance to position corresponding to an earlier (*MARK:NAME); if not found, the (*SKIP) is ignored (*THEN) local failure, backtrack to next alternation The effect of one of these verbs in a group called as a subroutine is confined to the subroutine call.
(?C) callout (assumed number 0) (?Cn) callout with numerical data n (?C"text") callout with string data The allowed string delimiters are ` ' " ^ % # $ (which are the same for the start and the end), and the starting delimiter { matched with the ending delimiter }. To encode the ending delimiter within the string, double it. If the PCRE2_SUBSTITUTE_LITERAL option is set, a replacement string forpcre2_substitute()is not interpreted. Otherwise, by default, the only special character is the dollar character in one of the following forms: $$ insert a dollar character $n or ${n} insert the contents of groupn $<name> insert the contents of named group $0 or $& insert the entire matched substring $` insert the substring that precedes the match $' insert the substring that follows the match $_ insert the entire input string $*MARK or ${*MARK} insert a control verb name For ${n}, n can be a name or a number. If PCRE2_SUBSTITUTE_EXTENDED is set, there is additional interpretation: 1. Backslash is an escape character, and the forms described in "ESCAPED CHARACTERS" above are recognized. Also: \Q...\E can be used to suppress interpretation \l force the next character to lower case \u force the next character to upper case \L force subsequent characters to lower case \U force subsequent characters to upper case \u\L force next character to upper case, then all lower \l\U force next character to lower case, then all upper \E end \L or \U case forcing \b backspace character (note: as in character class in pattern) \v vertical tab character (note: not the same as in a pattern) 2. The Python form \g<n>, where the angle brackets are part of the syntax andn is either a group name or a number, is recognized as an alternative way of inserting the contents of a group, for example \g<3>. 3. Capture substitution supports the following additional forms: ${n:-string} default for unset group ${n:+string1:string2} values for set/unset group The substitution strings themselves are expanded. Backslash can be used to escape colons and closing curly brackets.pcre2pattern(3),pcre2api(3),pcre2callout(3),pcre2matching(3),pcre2(3).
Philip Hazel Retired from University Computing Service Cambridge, England.
Last updated: 27 November 2024 Copyright (c) 1997-2024 University of Cambridge.
This page is part of thePCRE (Perl Compatible Regular Expressions) project. Information about the project can be found at ⟨http://www.pcre.org/⟩. If you have a bug report for this manual page, see ⟨http://bugs.exim.org/enter_bug.cgi?product=PCRE⟩. This page was obtained from the tarball fetched from ⟨https://github.com/PhilipHazel/pcre2.git⟩ on 2025-08-11. If you discover any rendering problems in this HTML version of the page, or you believe there is a better or more up-to-date source for the page, or you have corrections or improvements to the information in this COLOPHON (which isnot part of the original manual page), send a mail to man-pages@man7.orgPCRE2 10.46-DEV 27 November 2024PCRE2SYNTAX(3)Pages that refer to this page:grep(1), pcre2grep(1), pcre2pattern(3)
HTML rendering created 2025-09-06 byMichael Kerrisk, author ofThe Linux Programming Interface. For details of in-depthLinux/UNIX system programming training courses that I teach, lookhere. Hosting byjambit GmbH. | |