Movatterモバイル変換
[0]ホーム
[Intel-gfx] [RFC 00/15] Add support for HDMI2.1 FRL
Ankit Nautiyalankit.k.nautiyal at intel.com
Mon Nov 7 07:20:30 UTC 2022
This set is RFC for adding support for HDMI2.1 FRL Link training.FRL or Fixed Rate Link is defined by HDMI2.1 spec for supporting higherbit-rate. As per HDMI2.1 specification, a new data-channel or lane isadded in FRL mode, by repurposing the TMDS clock Channel. This enablesHDMI to support 48 Gbps bandwidth (i.e. bit rate of 12 Gbps/lane for 4lanes).This series is a step for Native HDMI2.1 support for MTL and to begindiscussion on the Fixed Rate Link Training part. It adds new structures,registers and functions for facilitating FRL training for HDMI2.1.Basically it provides the support for starting the Link training for agiven bit rate and lane count.The appropriate bit rate and lanes need to be computed in the computeconfig phase for HDMI, for a given video-mode, which is not part of thisseries, but can be built on the basic structures and new members addedin this series. The FRL Training will take place only when we take adecision to go for FRL mode and set the crtc_state parametersappropriately during compute config phase.The first 2 patches are prep work to have helper for getting MAXFRL rate for existing DP-to HDMI2.1 PCON and Native HDMI2.1 from anolder series:https://patchwork.freedesktop.org/series/99311/As HDMI2.1 needs C20 PHY, there is dependency on patch series fromMika:https://patchwork.freedesktop.org/series/109714/Therefore Patch 3 which adds the C10/C20 registers, is taken from theabove series for completeness, and FRL bits are added on top of that.Ankit Nautiyal (13): drm/edid: Add helper to get max FRL rate for an HDMI sink drm/i915/dp: Use the drm helpers for getting max FRL rate drm/i915/hdmi21/mtl: Add new data members for FRL configuration drm/drm_scdc_helper: Add SCDC helper funcs for HDMI2.1 drm/i915/mtl: Add registers for FRL Link Training drm/i915/mtl: Add HDMI2.1 bits in PORT_BUF_CTL_1 drm/i915/mtl: Add port_data/data width for TRANS_DDI_FUNC and DDI_BUF_CTL drm/i915/display/mtl: Add new members in crtc_state for FRL configuration drm/i915/display/mtl: Update Transcoder/DDI registers with the frl bits drm/i915/display/mtl: Reset FRL Transcoder config while disabling HDMI drm/i915/hdmi21/mtl: Enable Scrambling only for FRL mode drm/i915/hdmi21/mtl: Add support for sending uevent to user for FRL training failure drm/i915/display/mtl: Add functions for FRL trainining state machineMika Kahola (1): drm/i915/mtl: Create separate reg file for PICA registersVandita Kulkarni (1): drm/i915/hdmi21/mtl: Parse frl max link rate from vbt drivers/gpu/drm/display/drm_scdc_helper.c | 196 ++++++++ drivers/gpu/drm/drm_edid.c | 38 ++ drivers/gpu/drm/i915/display/intel_bios.c | 51 ++ drivers/gpu/drm/i915/display/intel_bios.h | 1 + .../gpu/drm/i915/display/intel_cx0_reg_defs.h | 144 ++++++ drivers/gpu/drm/i915/display/intel_ddi.c | 63 ++- .../drm/i915/display/intel_display_types.h | 32 ++ drivers/gpu/drm/i915/display/intel_dp.c | 17 +- drivers/gpu/drm/i915/display/intel_hdmi.c | 443 +++++++++++++++++- drivers/gpu/drm/i915/display/intel_hdmi.h | 2 + drivers/gpu/drm/i915/display/intel_vbt_defs.h | 7 + drivers/gpu/drm/i915/i915_reg.h | 33 +- include/drm/display/drm_scdc.h | 23 + include/drm/display/drm_scdc_helper.h | 21 + include/drm/drm_edid.h | 2 + 15 files changed, 1052 insertions(+), 21 deletions(-) create mode 100644 drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h-- 2.25.1
More information about the Intel-gfxmailing list
[8]ページ先頭