WhileUTC is derived from the coordinated atomic times provided by theatomic clocksoperated by a number of metrology institutes in different countries all over the world,UT1 is the time associated with thereal motion of the Earth.

The motion of the Earth is continuously monitored by theEarth Orientation Center located at theSYRTE observatory at Paris, France,which is an organizational unit of theInternational Earth Rotation And Reference Systems Service (IERS).

The Earth's motion is less constant than the atomic time scales, and also the exact locationof the North Pole and South Pole is slowly moving around (polar motion), so the reallength of a day (LOD) varies a little bit each day.

The accumulated variations in the length of day cause a slowly varying time differencebetween UT1 and UTC, which is also calledDUT1.Whenever the absolute value of DUT1 gets close to 1 second, aleap second is insertedinto the UTC time scale to make sure DUT1 stays less than 1 second, so the atomic time scale UTCstays roughly synchronized to the earth rotation represented by UT1.

A summary including current leap second information as well as a graphs of the development of the length of day and the polar motion over timecan be found at the EOP's web page:
http://hpiers.obspm.fr/eop-pc/index.php

The long-term development of UT1 and UTC compared to the common atomic time scale TAI are shown as graph here:
http://hpiers.obspm.fr/eop-pc/earthor/utc/leapsecond.html

Since the Earth spins by 360° per day, UT1 is often also interpreted as arotation angle,and is used in many scientific fields likegeodesy,astronomy, andgeophysics. For example, astronomers use UT1 to be able to point theirtelescopes to specific regions of the sky and space.

Measurements results and evaluations from the IERS' EOP division are made available as bulletins.An overview can be found here:
https://www.iers.org/IERS/EN/Publications/Bulletins/bulletins.html

Specifically,Bulletin A,Bulletin B, andBulletin Dprovide information on the Earth orientation and DUT1, while.Bulletin Cis used to publish leap second announcements.

A list of available versions of Bulletin A can be found here:
https://datacenter.iers.org/availableVersions.php?id=6

It's possible to plot the development of a bunch of measured EOP parameters online:
https://www.iers.org/IERS/EN/DataProducts/EarthOrientationData/eop.html

Here's a plot of the development of DUT1 over time:
https://datacenter.iers.org/singlePlot.php?plotname=BulletinA_All-UT1-UTC&id=6

Several time dissemination services operated byNIST (the U.S. metrology institute) also include information on DUT1, usually with 0.1 s resolution. Those services include the radio stationsWWV, WWVH, and WWVB as well as the telephone modem service ACTS. See:
https://www.nist.gov/pml/time-and-frequency-division/atomic-standards/leap-second-and-ut1-utc-information

NIST also operates NTP servers that deliverUT1 instead of UTC:ut1-time.colorado.edu andut1-wwv.nist.gov.

These servers seems to have quite strict access restriction. If too many requests are received from the sameIP address then requests may simply be dropped, and no reply is sent to the client.Care must be taken if several clients poll the NIST UT1 NTP server from behind a NAT firewall:for the server this looks as if all requests are sent from the same (public) IP address, and thussome client services may not see any replies at all.

More info on the NIST's UT1 NTP server can be found here:
https://www.nist.gov/pml/time-and-frequency-division/time-services/ut1-ntp-time-dissemination

In June 2016 this service has been announced officially by the IERS:
https://datacenter.iers.org/data/2/message_303.txt

Also the longwave transmitterMSF operated by the UK'sNational Physical Laboratory (NPL) provides DUT1 data.Details can be found in this PDF:
http://www.npl.co.uk/upload/pdf/MSF_Time_Date_Code.pdf

IERS Bulletin A is also encoded in a different format used by some astronomer software:
http://maia.usno.navy.mil/ser7/mark3.out

—Martin Burnickimartin.burnicki@meinberg.de 2019-02-27