^Louhichi, B., Abenhaim, G. N., & Tahan, A. S. (2015). CAD/CAE integration: updating the CAD model after a FEM analysis. The International Journal of Advanced Manufacturing Technology, 76(1-4), 391-400.
^Verma, G. (2018). Basics of Autodesk Nastran In-CAD 2018 (Colored). CADCAMCAE Works.
^Jasak, H., Jemcov, A., & Tukovic, Z. (2007, September). OpenFOAM: A C++ library for complex physics simulations. In International workshop on coupled methods in numerical dynamics (Vol. 1000, pp. 1-20). IUC Dubrovnik Croatia.
^Jasak, H. (2009). OpenFOAM: open source CFD in research and industry. International Journal of Naval Architecture and Ocean Engineering, 1(2), 89-94.
^Chen, G., Xiong, Q., Morris, P. J., Paterson, E. G., Sergeev, A., & Wang, Y. (2014). OpenFOAM for computational fluid dynamics. Not. AMS, 61(4), 354-363.
^Stout, P. J., Yang, H. Q., Dionne, P., Leonard, A., Tan, Z., Przekwas, A. J., & Krishnan, A. (1999, March). CFD-ACE+: A CAD system for simulation and modeling of MEMS. In Design, Test, and Microfabrication of MEMS and MOEMS (Vol. 3680, pp. 328-339). International Society for Optics and Photonics.
^Lindell, I.V. (1992). Methods for electromagnetic field analysis. United States: Oxford Univ Press.
^Balk, M. C. (2011, February). 3D Magnetron simulation with CST STUDIO SUITE™. In 2011 IEEE International Vacuum Electronics Conference (IVEC) (pp. 443-444). IEEE.
^笹川平久. (2015). 光学解析技術の進歩 (< 特集> LED 化にともなう光学系と光学設計・解析技術の進化). 照明学会誌, 99(6), 290-292.
^Geike, R., Berlin, T. F. H., & Maschinenbau, V. U. U. (2008, November). COMSOL multiphysics in education–chemical reactions, heat and mass transfer. In Proceedings of the COMSOL Conference (Vol. 1).
^Dickinson, E. J., Ekström, H., & Fontes, E. (2014). COMSOL Multiphysics®: Finite element software for electrochemical analysis. A mini-review. Electrochemistry communications, 40, 71-74.
^Panza, M. A. (2015). A review of experimental techniques for NVH analysis on a commercial vehicle. Energy Procedia, 82, 1017-1023.
^Binh, L. N. (2014). Optical fiber communication systems with Matlab and Simulink models. CRC Press.
^Stewart, R. W., Barlee, K. W., & Atkinson, D. S. (2015). Software defined radio using MATLAB & Simulink and the RTL-SDR. Strathclyde Academic Media.
^Chaturvedi, D. K. (2017). Modeling and simulation of systems using MATLAB and Simulink. CRC press.
^Bishop, R. H. (1996). Modern control systems analysis and design using MATLAB and SIMULINK. Addison-Wesley Longman Publishing Co., Inc..
^Xue, D., & Chen, Y. (2015). Modeling, analysis and design of control systems in MATLAB and Simulink. World Scientific Publishing.
^Yakimenko, O. A. (2019). Engineering Computations and Modeling in MATLAB®/Simulink®. American Institute of Aeronautics and Astronautics, Inc..
^Klee, H., & Allen, R. (2016). Simulation of dynamic systems with MATLAB and Simulink. CRC Press.
^Vasiliu, N., Vasiliu, D., Călinoiu, C., & Puhalschi, R. (2018). Simulation of Fluid Power Systems with Simcenter Amesim. CRC Press.
^Hřebíček, J., & Řezáč, M. (2008). Modelling with maple and maplesim. In 22nd European Conference on Modelling nad Simulation ECMS 2008 Proceedings (pp. 60-66).
^Lynch, S. (2017). An Introduction to Wolfram SystemModeler. In Dynamical Systems with Applications Using Mathematica® (pp. 509-522). Birkhäuser, Cham.
^Rozhdestvensky, K., Ryzhov, V., Fedorova, T., Safronov, K., Tryaskin, N., Sulaiman, S. A., ... & Hassan, S. (2020). Computer Modeling and Simulation of Dynamic Systems Using Wolfram SystemModeler. Springer Singapore.
^Fritzson, P., Aronsson, P., Lundvall, H., Nyström, K., Pop, A., Saldamli, L., & Broman, D. (2005). The OpenModelica modeling, simulation, and development environment. In 46th Conference on Simulation and Modelling of the Scandinavian Simulation Society (SIMS2005), Trondheim, Norway, October 13-14, 2005.
^Fritzson, P., Aronsson, P., Pop, A., Lundvall, H., Nystrom, K., Saldamli, L., ... & Sandholm, A. (2006, October). OpenModelica-A free open-source environment for system modeling, simulation, and teaching. In 2006 IEEE Conference on Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control (pp. 1588-1595). IEEE.
^Wouwer, A. V., Saucez, P., & Vilas, C. (2014). Simulation of Ode/Pde Models with MATLAB®, OCTAVE and SCILAB: Scientific and Engineering Applications. Springer.
^Bunks, C., Chancelier, J. P., Delebecque, F., Goursat, M., Nikoukhah, R., & Steer, S. (2012). Engineering and scientific computing with Scilab. Springer Science & Business Media.
^Mora, Á., Galán, J. L., Aguilera, G., Fernández, Á., Mérida, E., & Rodríguez, P. (2010). Scilab and Maxima Environment: Towards Free Software in Numerical Analysis. International Journal for Technology in Mathematics Education, 17(2).
^Gaier, C., Unger, B., & Vogler, J. (1999). Theory and applications of FEMFAT-a FE-postprocessing tool for fatigue analysis. In Fatigue'99: Seventh International Fatigue Congress (pp. 821-826).
^Mohsin, T., Arhonditsis, G., Mirza, M., & Gough, W. A. (2019). Key Agri-Climatic and Socio-Economic Indicators for Cereal Production across the World. International Journal of Environment, Agriculture and Biotechnology, 4(2).
^Li, Q., Ito, K., Wu, Z., Lowry, C. S., & Loheide II, S. P. (2009). COMSOL Multiphysics: A novel approach to ground water modeling. Groundwater, 47(4), 480-487.