Finds every I2C device on the bus.

• UpdatedJun 1, 2019
• C

The Repo contains KiCAD hardware files and software for Morph Watch

• UpdatedFeb 5, 2021

Simple HAL driver for ILI9341 320x240 TFT LCD for STM32 microcontrollers

• UpdatedMay 3, 2020
• C

STM32 based project on Person and Tone Identification

• UpdatedMay 20, 2018
• C

STM32 based oscilloscope, AiR 6 sem PWR

• UpdatedJul 5, 2024
• C

The purpose of this project is to bypass the physical requirements of the BootLoader access. The approach is the trigger the MCU to enter BootLoader Mode via UART by only using Tx, Rx and Gnd pins. Moreover, the trigger UART port can also be used to program the MCU.

• UpdatedOct 15, 2022
• C

This repository is made up of different branches that reflect the use of different peripherals on a STM32L476RG microcontroller

• UpdatedOct 2, 2023
• C

Example for NUCLEO-L476RG how to use bno08x-rvc lib to receive data from the BNO08x sensor (BNO080/85/86) in RVC mode.

• UpdatedNov 19, 2021
• Rust

Deskovery bot firmware

• UpdatedFeb 1, 2023
• C

This repository contains projects and examples developed for the ObCP (Personal Connected Object), a platform built around the STM32L476 microcontroller and Bluetooth modules SPBTLE-RF (pre-2024) and BlueNRG-M0 (from 2024). It is designed to enable prototyping and learning in IoT applications, focusing on low-energy and efficient communication.

• UpdatedDec 13, 2024
• C

MPU6050 (GY-521) Driver for STM32 with Motion and Zero-Motion Detection

• UpdatedJan 8, 2025
• C

Game about choosing the right combination of 6 characters.

• UpdatedMar 13, 2023
• C

450 Real-Time Embedded Systems control code

• UpdatedMar 24, 2018
• C

A program for the STM32L476RG microcontroller sending device rotation data to the computer. The device acts as a controller for a game "Ścigałka".

• UpdatedJan 27, 2024
• C

Simple STM32 projects, AiR 6 sem PWR

• UpdatedMay 29, 2024
• C

Signal generator core for Nucleo-L476RG board

• UpdatedJan 24, 2024
• C

It contains examples and experiments about riot-os

• UpdatedNov 2, 2022
• C

Example for SSD1306 OLED display written for STM32L476RG MCU, which shows whatever you want on OLED display.

• UpdatedJan 18, 2023
• C

This project interfaces an RGB LED module with a GPIO Pins on an STM32 Nucleo Board. The RGB LED module consists of individual LEDs for red, green, and blue, each controlled independently. PWM signals with varying duty cycles are generated using STM32's Timer peripherals to control the brightness of each LED.

• UpdatedSep 4, 2023
• C

Some Arm Assembly Code for Stm32-M4 board/cpu and a project with RedBlocks used for simulation . Programs used Keil uVision(IDE), RedBlocks Simulator. In latest projects I used STM32CUBEMX too

• UpdatedMay 14, 2022
• C