Arduino: 1.8.19 (Windows 10), Board: "Generic STM32F4 series, Black F407VE, STM32CubeProgrammer (SWD), Enabled (generic 'Serial'), None, Low/Full Speed, Smallest (-Os default), None, Newlib Nano (default)"Warning: Board breadboard:avr:atmega328bb doesn't define a 'build.board' preference. Auto-set to: AVR_ATMEGA328BB\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void low_level_init(netif*)':\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:170:18: error: 'struct ETH_InitTypeDef' has no member named 'AutoNegotiation'  170 |   EthHandle.Init.AutoNegotiation = ETH_AUTONEGOTIATION_ENABLE;      |                  ^~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:171:18: error: 'struct ETH_InitTypeDef' has no member named 'Speed'  171 |   EthHandle.Init.Speed = ETH_SPEED_100M;      |                  ^~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:172:18: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'  172 |   EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;      |                  ^~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:172:31: error: 'ETH_MODE_FULLDUPLEX' was not declared in this scope  172 |   EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;      |                               ^~~~~~~~~~~~~~~~~~~In file included from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h:132,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\cores\arduino/stm32/stm32_def.h:36,                 from \\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:48:C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h:11633:53: error: invalid conversion from 'long unsigned int' to 'ETH_MediaInterfaceTypeDef' [-fpermissive]11633 | #define SYSCFG_PMC_MII_RMII_SEL_Msk          (0x1UL << SYSCFG_PMC_MII_RMII_SEL_Pos) /*!< 0x00800000 */C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f407xx.h:11634:46: note: in expansion of macro 'SYSCFG_PMC_MII_RMII_SEL_Msk'11634 | #define SYSCFG_PMC_MII_RMII_SEL              SYSCFG_PMC_MII_RMII_SEL_Msk       /*!<Ethernet PHY interface selection */      |                                              ^~~~~~~~~~~~~~~~~~~~~~~~~~~C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h:1344:40: note: in expansion of macro 'SYSCFG_PMC_MII_RMII_SEL' 1344 | #define ETH_MEDIA_INTERFACE_RMII      (SYSCFG_PMC_MII_RMII_SEL)      |                                        ^~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:174:35: note: in expansion of macro 'ETH_MEDIA_INTERFACE_RMII'  174 |   EthHandle.Init.MediaInterface = ETH_MEDIA_INTERFACE_RMII;      |                                   ^~~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:181:18: error: 'struct ETH_InitTypeDef' has no member named 'RxMode'  181 |   EthHandle.Init.RxMode = ETH_RXPOLLING_MODE;      |                  ^~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:183:18: error: 'struct ETH_InitTypeDef' has no member named 'ChecksumMode'  183 |   EthHandle.Init.ChecksumMode = ETH_CHECKSUM_BY_HARDWARE;      |                  ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:184:18: error: 'struct ETH_InitTypeDef' has no member named 'PhyAddress'  184 |   EthHandle.Init.PhyAddress = LAN8742A_PHY_ADDRESS;      |                  ^~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:193:3: error: 'HAL_ETH_DMATxDescListInit' was not declared in this scope  193 |   HAL_ETH_DMATxDescListInit(&EthHandle, DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);      |   ^~~~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:196:3: error: 'HAL_ETH_DMARxDescListInit' was not declared in this scope  196 |   HAL_ETH_DMARxDescListInit(&EthHandle, DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);      |   ^~~~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:223:48: error: invalid conversion from 'uint32_t*' {aka 'long unsigned int*'} to 'uint32_t' {aka 'long unsigned int'} [-fpermissive]  223 |   HAL_ETH_ReadPHYRegister(&EthHandle, PHY_IMR, &regvalue);      |                                                ^~~~~~~~~      |                                                |      |                                                uint32_t* {aka long unsigned int*}\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:223:26: error: too few arguments to function 'HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef*, uint32_t, uint32_t, uint32_t*)'  223 |   HAL_ETH_ReadPHYRegister(&EthHandle, PHY_IMR, &regvalue);      |   ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~In file included from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/STM32F4xx/stm32f4xx_hal_conf_default.h:346,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/STM32F4xx/stm32f4xx_hal_conf.h:19,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h:29,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h:287:C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h:2064:19: note: declared here 2064 | HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg,      |                   ^~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:228:27: error: too few arguments to function 'HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef*, uint32_t, uint32_t, uint32_t)'  228 |   HAL_ETH_WritePHYRegister(&EthHandle, PHY_IMR, regvalue);      |   ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h:2062:19: note: declared here 2062 | HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg,      |                   ^~~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'err_t low_level_output(netif*, pbuf*)':\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:254:43: error: 'struct ETH_HandleTypeDef' has no member named 'TxDesc'; did you mean 'TxDescList'?  254 |   uint8_t *buffer = (uint8_t *)(EthHandle.TxDesc->Buffer1Addr);      |                                           ^~~~~~      |                                           TxDescList\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:263:25: error: 'struct ETH_HandleTypeDef' has no member named 'TxDesc'; did you mean 'TxDescList'?  263 |   DmaTxDesc = EthHandle.TxDesc;      |                         ^~~~~~      |                         TxDescList\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:269:21: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Status'  269 |     if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) {      |                     ^~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:284:53: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer2NextDescAddr'  284 |       DmaTxDesc = (ETH_DMADescTypeDef *)(DmaTxDesc->Buffer2NextDescAddr);      |                                                     ^~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:287:23: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Status'  287 |       if ((DmaTxDesc->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET) {      |                       ^~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:292:39: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer1Addr'  292 |       buffer = (uint8_t *)(DmaTxDesc->Buffer1Addr);      |                                       ^~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:307:3: error: 'HAL_ETH_TransmitFrame' was not declared in this scope; did you mean 'HAL_ETH_Transmit_IT'?  307 |   HAL_ETH_TransmitFrame(&EthHandle, framelength);      |   ^~~~~~~~~~~~~~~~~~~~~      |   HAL_ETH_Transmit_IT\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'pbuf* low_level_input(netif*)':\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:346:7: error: 'HAL_ETH_GetReceivedFrame_IT' was not declared in this scope  346 |   if (HAL_ETH_GetReceivedFrame_IT(&EthHandle) != HAL_OK) {      |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:351:19: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'  351 |   len = EthHandle.RxFrameInfos.length;      |                   ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:352:33: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'  352 |   buffer = (uint8_t *)EthHandle.RxFrameInfos.buffer;      |                                 ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:360:27: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'  360 |     dmarxdesc = EthHandle.RxFrameInfos.FSRxDesc;      |                           ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:373:55: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer2NextDescAddr'  373 |         dmarxdesc = (ETH_DMADescTypeDef *)(dmarxdesc->Buffer2NextDescAddr);      |                                                       ^~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:374:41: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer1Addr'  374 |         buffer = (uint8_t *)(dmarxdesc->Buffer1Addr);      |                                         ^~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:389:25: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'  389 |   dmarxdesc = EthHandle.RxFrameInfos.FSRxDesc;      |                         ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:391:29: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'  391 |   for (i = 0; i < EthHandle.RxFrameInfos.SegCount; i++) {      |                             ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:392:16: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Status'  392 |     dmarxdesc->Status |= ETH_DMARXDESC_OWN;      |                ^~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:393:51: error: 'volatile struct ETH_DMADescTypeDef' has no member named 'Buffer2NextDescAddr'  393 |     dmarxdesc = (ETH_DMADescTypeDef *)(dmarxdesc->Buffer2NextDescAddr);      |                                                   ^~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:397:13: error: 'struct ETH_HandleTypeDef' has no member named 'RxFrameInfos'  397 |   EthHandle.RxFrameInfos.SegCount = 0;      |             ^~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'uint8_t ethernetif_is_init()':\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:449:21: error: 'struct ETH_HandleTypeDef' has no member named 'State'; did you mean 'gState'?  449 |   return (EthHandle.State != HAL_ETH_STATE_RESET);      |                     ^~~~~      |                     gState\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void ethernetif_set_link(netif*)':\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:509:49: error: invalid conversion from 'uint32_t*' {aka 'long unsigned int*'} to 'uint32_t' {aka 'long unsigned int'} [-fpermissive]  509 |   HAL_ETH_ReadPHYRegister(&EthHandle, PHY_ISFR, &regvalue);      |                                                 ^~~~~~~~~      |                                                 |      |                                                 uint32_t* {aka long unsigned int*}\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:509:26: error: too few arguments to function 'HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef*, uint32_t, uint32_t, uint32_t*)'  509 |   HAL_ETH_ReadPHYRegister(&EthHandle, PHY_ISFR, &regvalue);      |   ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h:2064:19: note: declared here 2064 | HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg,      |                   ^~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:516:48: error: invalid conversion from 'uint32_t*' {aka 'long unsigned int*'} to 'uint32_t' {aka 'long unsigned int'} [-fpermissive]  516 |   HAL_ETH_ReadPHYRegister(&EthHandle, PHY_BSR, &regvalue);      |                                                ^~~~~~~~~      |                                                |      |                                                uint32_t* {aka long unsigned int*}\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:516:26: error: too few arguments to function 'HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef*, uint32_t, uint32_t, uint32_t*)'  516 |   HAL_ETH_ReadPHYRegister(&EthHandle, PHY_BSR, &regvalue);      |   ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h:2064:19: note: declared here 2064 | HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg,      |                   ^~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp: In function 'void ethernetif_update_config(netif*)':\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:542:24: error: 'struct ETH_InitTypeDef' has no member named 'AutoNegotiation'  542 |     if (EthHandle.Init.AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE) {      |                        ^~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:545:51: error: invalid conversion from 'uint32_t*' {aka 'long unsigned int*'} to 'uint32_t' {aka 'long unsigned int'} [-fpermissive]  545 |       HAL_ETH_ReadPHYRegister(&EthHandle, PHY_SR, &regvalue);      |                                                   ^~~~~~~~~      |                                                   |      |                                                   uint32_t* {aka long unsigned int*}\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:545:30: error: too few arguments to function 'HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef*, uint32_t, uint32_t, uint32_t*)'  545 |       HAL_ETH_ReadPHYRegister(&EthHandle, PHY_SR, &regvalue);      |       ~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h:2064:19: note: declared here 2064 | HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint32_t PHYAddr, uint32_t PHYReg,      |                   ^~~~~~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:553:24: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'  553 |         EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;      |                        ^~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:553:37: error: 'ETH_MODE_FULLDUPLEX' was not declared in this scope  553 |         EthHandle.Init.DuplexMode = ETH_MODE_FULLDUPLEX;      |                                     ^~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:556:24: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'  556 |         EthHandle.Init.DuplexMode = ETH_MODE_HALFDUPLEX;      |                        ^~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:556:37: error: 'ETH_MODE_HALFDUPLEX' was not declared in this scope  556 |         EthHandle.Init.DuplexMode = ETH_MODE_HALFDUPLEX;      |                                     ^~~~~~~~~~~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:561:24: error: 'struct ETH_InitTypeDef' has no member named 'Speed'  561 |         EthHandle.Init.Speed = ETH_SPEED_10M;      |                        ^~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:564:24: error: 'struct ETH_InitTypeDef' has no member named 'Speed'  564 |         EthHandle.Init.Speed = ETH_SPEED_100M;      |                        ^~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:573:80: error: 'struct ETH_InitTypeDef' has no member named 'DuplexMode'  573 |       HAL_ETH_WritePHYRegister(&EthHandle, PHY_BCR, ((uint16_t)(EthHandle.Init.DuplexMode >> 3) |      |                                                                                ^~~~~~~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:574:80: error: 'struct ETH_InitTypeDef' has no member named 'Speed'  574 |                                                      (uint16_t)(EthHandle.Init.Speed >> 1)));      |                                                                                ^~~~~\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:578:36: error: 'ETH_MACInitTypeDef' was not declared in this scope; did you mean 'ETH_InitTypeDef'?  578 |     HAL_ETH_ConfigMAC(&EthHandle, (ETH_MACInitTypeDef *) NULL);      |                                    ^~~~~~~~~~~~~~~~~~      |                                    ETH_InitTypeDef\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:578:56: error: expected primary-expression before ')' token  578 |     HAL_ETH_ConfigMAC(&EthHandle, (ETH_MACInitTypeDef *) NULL);      |                                                        ^\\LANDISK-HDL-AA1\disk1\Arduino\libraries\STM32duino_STM32Ethernet\src\utility\ethernetif.cpp:578:5: error: 'HAL_ETH_ConfigMAC' was not declared in this scope  578 |     HAL_ETH_ConfigMAC(&EthHandle, (ETH_MACInitTypeDef *) NULL);      |     ^~~~~~~~~~~~~~~~~exit status 1Error compiling for board Generic STM32F4 series.This report would have more information with"Show verbose output during compilation"option enabled in File -> Preferences.

#ifndef __STM32F4xx_HAL_CONF_H#define __STM32F4xx_HAL_CONF_H#include "variant.h"// Enable legacy HAL Ethernet driver#define HAL_CAN_LEGACY_MODULE_ENABLED/* STM32F4xx specific HAL configuration options. */#if __has_include("hal_conf_custom.h")#include "hal_conf_custom.h"#else#if __has_include("hal_conf_extra.h")#include "hal_conf_extra.h"#endif#include "stm32f4xx_hal_conf_default.h"#endif#endif /* __STM32F4xx_HAL_CONF_H */

Arduino: 1.8.19 (Windows 10), Board: "Generic STM32F4 series, Black F407VE, STM32CubeProgrammer (SWD), Enabled (generic 'Serial'), None, Low/Full Speed, Smallest (-Os default), None, Newlib Nano (default)"Warning: Board breadboard:avr:atmega328bb doesn't define a 'build.board' preference. Auto-set to: AVR_ATMEGA328BBIn file included from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/STM32F4xx/stm32f4xx_hal_conf.h:19,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h:29,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h:287,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\cores\arduino/stm32/stm32_def.h:36,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\cores\arduino/stm32/clock.h:19,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\cores\arduino/wiring_time.h:23,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\cores\arduino/wiring.h:38,                 from C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\cores\arduino/Arduino.h:36,                 from sketch\DhcpAddressPrinter.ino.cpp:1:C:\Users\user\AppData\Local\Arduino15\packages\STMicroelectronics\hardware\stm32\2.5.0\system/STM32F4xx/stm32f4xx_hal_conf_default.h:322:10: fatal error: stm32f4xx_hal_can_legacy.h: No such file or directory  322 | #include "stm32f4xx_hal_can_legacy.h"      |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~compilation terminated.exit status 1Error compiling for board Generic STM32F4 series.This report would have more information with"Show verbose output during compilation"option enabled in File -> Preferences.