1010 *
1111 *******************************************************************************
1212 */
13- #if defined(ARDUINO_GENERIC_F723ICKX )|| defined(ARDUINO_GENERIC_F723ICTX )|| \
14- defined(ARDUINO_GENERIC_F723IEKX )|| defined(ARDUINO_GENERIC_F723IETX )|| \
15- defined(ARDUINO_GENERIC_F730I8KX )|| defined(ARDUINO_GENERIC_F733IEKX )|| \
13+ #if defined(ARDUINO_GENERIC_F723ICKX )|| defined(ARDUINO_GENERIC_F723ICTX )||
14+ defined(ARDUINO_GENERIC_F723IEKX )|| defined(ARDUINO_GENERIC_F723IETX )||
15+ defined(ARDUINO_GENERIC_F730I8KX )|| defined(ARDUINO_GENERIC_F733IEKX )||
1616 defined(ARDUINO_GENERIC_F733IETX )
1717#include "pins_arduino.h"
1818
1919/**
20-
21-
22-
23-
20+ * @brief System Clock Configuration
21+ * @param None
22+ * @retval None
23+ */
2424WEAK void SystemClock_Config (void )
2525{
2626/* SystemClock_Config can be generated by STM32CubeMX */
27- RCC_OscInitTypeDef RCC_OscInitStruct = {};
27+ RCC_OscInitTypeDef RCC_OscInitStruct = {};
2828RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
2929
3030/** Configure the main internal regulator output voltage
31- */
31+
3232__HAL_RCC_PWR_CLK_ENABLE ();
3333__HAL_PWR_VOLTAGESCALING_CONFIG (PWR_REGULATOR_VOLTAGE_SCALE1 );
3434
3535/** Initializes the RCC Oscillators according to the specified parameters
36- * in the RCC_OscInitTypeDef structure.
37- */
36+
37+
3838RCC_OscInitStruct .OscillatorType = RCC_OSCILLATORTYPE_HSI ;
3939RCC_OscInitStruct .HSIState = RCC_HSI_ON ;
4040RCC_OscInitStruct .HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT ;
@@ -44,29 +44,25 @@ WEAK void SystemClock_Config(void)
4444RCC_OscInitStruct .PLL .PLLN = 432 ;
4545RCC_OscInitStruct .PLL .PLLP = RCC_PLLP_DIV2 ;
4646RCC_OscInitStruct .PLL .PLLQ = 9 ;
47- if (HAL_RCC_OscConfig (& RCC_OscInitStruct )!= HAL_OK )
48- {
47+ if (HAL_RCC_OscConfig (& RCC_OscInitStruct )!= HAL_OK ) {
4948Error_Handler ();
5049 }
5150
5251/** Activate the Over-Drive mode
53- */
54- if (HAL_PWREx_EnableOverDrive ()!= HAL_OK )
55- {
52+ */
53+ if (HAL_PWREx_EnableOverDrive ()!= HAL_OK ) {
5654Error_Handler ();
5755 }
5856
5957/** Initializes the CPU, AHB and APB buses clocks
60- */
61- RCC_ClkInitStruct .ClockType = RCC_CLOCKTYPE_HCLK |RCC_CLOCKTYPE_SYSCLK
62- |RCC_CLOCKTYPE_PCLK1 |RCC_CLOCKTYPE_PCLK2 ;
58+ */
59+ RCC_ClkInitStruct .ClockType = RCC_CLOCKTYPE_HCLK |RCC_CLOCKTYPE_SYSCLK |RCC_CLOCKTYPE_PCLK1 |RCC_CLOCKTYPE_PCLK2 ;
6360RCC_ClkInitStruct .SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK ;
6461RCC_ClkInitStruct .AHBCLKDivider = RCC_SYSCLK_DIV1 ;
6562RCC_ClkInitStruct .APB1CLKDivider = RCC_HCLK_DIV4 ;
6663RCC_ClkInitStruct .APB2CLKDivider = RCC_HCLK_DIV2 ;
6764
68- if (HAL_RCC_ClockConfig (& RCC_ClkInitStruct ,FLASH_LATENCY_7 )!= HAL_OK )
69- {
65+ if (HAL_RCC_ClockConfig (& RCC_ClkInitStruct ,FLASH_LATENCY_7 )!= HAL_OK ) {
7066Error_Handler ();
7167 }
7268}