@@ -53,14 +53,14 @@ IWatchdogClass IWatchdog = IWatchdogClass();
5353
5454####Predefined values
5555
56- * Minimal timeout in microseconds:` IWDG_TIMEOUT_MIN `
57- * Maximal timeout in microseconds:` IWDG_TIMEOUT_MAX `
56+ * Minimal timeout in** microseconds** :` IWDG_TIMEOUT_MIN `
57+ * Maximal timeout in** microseconds** :` IWDG_TIMEOUT_MAX `
5858
5959####` void begin(uint32_t timeout, uint32_t window = IWDG_TIMEOUT_MAX) `
6060
6161The` begin() ` function would initialize the IWDG hardware block.
6262
63- The` timeout ` parameter is in microseconds and set the timer reset timeout.
63+ The` timeout ` parameter is in** microseconds** and set the timer reset timeout.
6464When the timer reaches zero the hardware block would generate a reset signal
6565for the CPU.
6666
@@ -84,22 +84,22 @@ Valid timeout values depends of the LSI clock. Typically, it is 32kH value are b
8484 | 8193ms - 16384ms | 4ms
8585 | 16385ms - 32768ms | 8ms
8686
87- The optional` window ` parameter is in microseconds and must be less than` timeout ` .
87+ The optional` window ` parameter is in** microseconds and must be less than` timeout ` ** .
8888If the window option is enabled, the counter must be refreshed inside the window;
8989otherwise, a system reset is generated.
9090
91- ** Note: **
92- Window feature is not available for all STM32 series.
91+ > [ !NOTE ]
92+ > Window feature is not available for all STM32 series.
9393
9494Calling the` begin() ` method with value outside of the valid range
9595would return without initializing the watchdog timer.
9696
97- ** WARNING: **
98- * Once started the IWDG timer can not be stopped. If you are
99- planning to debug the live system, the watchdog timer may cause the
100- system to be reset while you are stopped in the debugger. Also consider
101- the iwatchdog timer implications if you are designing a system which puts
102- the CPU in sleep mode.*
97+ > [ ! WARNING]
98+ > Once started the IWDG timer can not be stopped. If you are
99+ > planning to debug the live system, the watchdog timer may cause the
100+ > system to be reset while you are stopped in the debugger. Also consider
101+ > the iwatchdog timer implications if you are designing a system which puts
102+ > the CPU in sleep mode.*
103103
104104####` void reload() `
105105
@@ -119,7 +119,7 @@ The `timeout` and optional `window` parameters are the same than `begin()` metho
119119The` get() ` method allows to get the current timeout and window values
120120currently set.
121121
122- The` timeout ` and optional` window ` pointers to get values are in microseconds.
122+ The` timeout ` and optional` window ` pointers to get values are in** microseconds** .
123123
124124####` bool isEnabled() `
125125