Repository files navigation

• github.com/flavorjones/loofah

• rubydoc.info/github/flavorjones/loofah/master/frames

• librelist.com/browser/loofah

Loofah is a general library for manipulating and transforming HTML/XML documents and fragments. It’s built on top of Nokogiri and libxml2, so it’s fast and has a nice API.

Loofah excels at HTML sanitization (XSS prevention). It includes some nice HTML sanitizers, which are based on HTML5lib’s whitelist, so it most likely won’t make your codes less secure. (These statements have not been evaluated by Netexperts.)

ActiveRecord extensions for sanitization are available in the ‘loofah-activerecord` gem (seegithub.com/flavorjones/loofah-activerecord).

• Easily write custom scrubbers for HTML/XML leveraging the sweetness of Nokogiri (and HTML5lib’s whitelists).

• Common HTML sanitizing tasks are built-in:

  • Strip unsafe tags, leaving behind only the inner text.

  • Prune unsafe tags and their subtrees, removing all traces that they ever existed.

  • Escape unsafe tags and their subtrees, leaving behind lots of< and> entities.

  • Whitewash the markup, removing all attributes and namespaced nodes.

• Common HTML transformation tasks are built-in:

  • Add thenofollow attribute to all hyperlinks.

• Format markup as plain text, with or without sensible whitespace handling around block elements.

• Replace Rails’sstrip_tags andsanitize view helper methods.

Loofah is one of two known Ruby XSS/sanitization solutions that guarantees well-formed and valid markup (the other is Sanitize, which also uses Nokogiri).

Loofah works on XML, XHTML and HTML documents.

Also, it’s pretty fast. Here is a benchmark comparing Loofah to other commonly-used libraries (ActionView, Sanitize, HTML5lib and HTMLfilter):

• gist.github.com/170193

Lastly, Loofah is extensible. It’s super-easy to write your own custom scrubbers for whatever document manipulation you need. You don’t like the built-in scrubbers? Build your own, like a boss.

Loofah wrapsNokogiri in a loving embrace.Nokogiri is an excellent HTML/XML parser. If you don’t know howNokogiri works, you might want to pause for a moment and go check it out. I’ll wait.

Loofah presents the following classes:

• Loofah::HTML::Document and Loofah::HTML::DocumentFragment

• Loofah::XML::Document and Loofah::XML::DocumentFragment

• Loofah::Scrubber

The documents and fragments are subclasses of the similar Nokogiri classes.

The Scrubber represents the document manipulation, either by wrapping a block,

span2div =Loofah::Scrubber.newdo|node|node.name ="div"ifnode.name=="span"end

or by implementing a method.

Generally speaking, unless you expect to have a DOCTYPE and a single root node, you don’t have adocument, you have afragment. For HTML, another rule of thumb is thatdocuments havehtml andbody tags, andfragments usually do not.

HTML fragments should be parsed with Loofah.fragment. The result won’t be wrapped inhtml orbody tags, won’t have a DOCTYPE declaration,head elements will be silently ignored, and multiple root nodes are allowed.

XML fragments should be parsed with Loofah.xml_fragment. The result won’t have a DOCTYPE declaration, and multiple root nodes are allowed.

HTML documents should be parsed with Loofah.document. The result will have a DOCTYPE declaration, along withhtml,head andbody tags.

XML documents should be parsed with Loofah.xml_document. The result will have a DOCTYPE declaration and a single root node.

These classes are subclasses of Nokogiri::HTML::Document and Nokogiri::HTML::DocumentFragment, so you get all the markup fixer-uppery and API goodness of Nokogiri.

The module methods Loofah.document and Loofah.fragment will parse an HTML document and an HTML fragment, respectively.

Loofah.document(unsafe_html).is_a?(Nokogiri::HTML::Document)# => trueLoofah.fragment(unsafe_html).is_a?(Nokogiri::HTML::DocumentFragment)# => true

Loofah injects ascrub! method, which takes either a symbol (for built-in scrubbers) or a Loofah::Scrubber object (for custom scrubbers), and modifies the document in-place.

Loofah overridesto_s to return HTML:

unsafe_html ="ohai! <div>div is safe</div> <script>but script is not</script>"doc =Loofah.fragment(unsafe_html).scrub!(:strip)doc.to_s# => "ohai! <div>div is safe</div> "

andtext to return plain text:

doc.text# => "ohai! div is safe "

Also,to_text is available, which does the right thing with whitespace around block-level elements.

doc =Loofah.fragment("<h1>Title</h1><div>Content</div>")doc.text# => "TitleContent"           # probably not what you wantdoc.to_text# => "\nTitle\n\nContent\n"   # better

These classes are subclasses of Nokogiri::XML::Document and Nokogiri::XML::DocumentFragment, so you get all the markup fixer-uppery and API goodness of Nokogiri.

The module methods Loofah.xml_document and Loofah.xml_fragment will parse an XML document and an XML fragment, respectively.

Loofah.xml_document(bad_xml).is_a?(Nokogiri::XML::Document)# => trueLoofah.xml_fragment(bad_xml).is_a?(Nokogiri::XML::DocumentFragment)# => true

Nokogiri::XML::Node and Nokogiri::XML::NodeSet also get ascrub! method, which makes it easy to scrub subtrees.

The following code will apply theemployee_scrubber only to theemployee nodes (and their subtrees) in the document:

Loofah.xml_document(bad_xml).xpath("//employee").scrub!(employee_scrubber)

And this code will only scrub the firstemployee node and its subtree:

Loofah.xml_document(bad_xml).at_xpath("//employee").scrub!(employee_scrubber)

A Scrubber wraps up a block (or method) that is run on a document node:

# change all <span> tags to <div> tagsspan2div =Loofah::Scrubber.newdo|node|node.name ="div"ifnode.name=="span"end

This can then be run on a document:

Loofah.fragment("<span>foo</span><p>bar</p>").scrub!(span2div).to_s# => "<div>foo</div><p>bar</p>"

Scrubbers can be run on a document in either a top-down traversal (the default) or bottom-up. Top-down scrubbers can optionally return Scrubber::STOP to terminate the traversal of a subtree. Read below and in the Loofah::Scrubber class for more detailed usage.

Here’s an XML example:

# remove all <employee> tags that have a "deceased" attribute set to truebring_out_your_dead =Loofah::Scrubber.newdo|node|ifnode.name=="employee"andnode["deceased"]=="true"node.removeLoofah::Scrubber::STOP# don't bother with the rest of the subtreeendendLoofah.xml_document(File.read('plague.xml')).scrub!(bring_out_your_dead)

Loofah comes with a set of sanitizing scrubbers that use HTML5lib’s whitelist algorithm:

doc.scrub!(:strip)# replaces unknown/unsafe tags with their inner textdoc.scrub!(:prune)#  removes unknown/unsafe tags and their childrendoc.scrub!(:escape)#  escapes unknown/unsafe tags, like this: <script>doc.scrub!(:whitewash)#  removes unknown/unsafe/namespaced tags and their children,#          and strips all node attributes

Loofah also comes with some common transformation tasks:

doc.scrub!(:nofollow)#     adds rel="nofollow" attribute to links

See Loofah::Scrubbers for more details and example usage.

You can chain scrubbers:

Loofah.fragment("<span>hello</span> <script>alert('OHAI')</script>") \      .scrub!(:prune) \      .scrub!(span2div).to_s# => "<div>hello</div> "

The class methods Loofah.scrub_fragment and Loofah.scrub_document are shorthand.

Loofah.scrub_fragment(unsafe_html,:prune)Loofah.scrub_document(unsafe_html,:prune)Loofah.scrub_xml_fragment(bad_xml,custom_scrubber)Loofah.scrub_xml_document(bad_xml,custom_scrubber)

are the same thing as (and arguably semantically clearer than):

Loofah.fragment(unsafe_html).scrub!(:prune)Loofah.document(unsafe_html).scrub!(:prune)Loofah.xml_fragment(bad_xml).scrub!(custom_scrubber)Loofah.xml_document(bad_xml).scrub!(custom_scrubber)

Loofah has two “view helpers”: Loofah::Helpers.sanitize and Loofah::Helpers.strip_tags, both of which are drop-in replacements for the Rails ActionView helpers of the same name.

• Nokogiri >= 1.4.4

Unsurprisingly:

• gem install loofah

The bug tracker is available here:

• github.com/flavorjones/loofah/issues

And the mailing list is on librelist:

• loofah@librelist.com /librelist.com

And the IRC channel is #loofah on freenode.

• Nokogiri:nokogiri.org

• libxml2:xmlsoft.org

• html5lib:code.google.com/p/html5lib

• Mike Dalessio (@flavorjones)

• Bryan Helmkamp

Featuring code contributed by:

• Aaron Patterson

• John Barnette

• Josh Owens

• Paul Dix

• Luke Melia

And a big shout-out to Corey Innis for the name, and feedback on the API.

The following people have generously donated via thePledgie badge on theLoofah github page:

• Bill Harding

This library was formerly known as Dryopteris, which was a very bad name that nobody could spell properly.

The MIT License

Copyright © 2009, 2010, 2011 by Mike Dalessio, Bryan Helmkamp

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.