Dec 13, 2023 · Dec 12, 2023 · Dec 13, 2023 · Dec 13, 2023
diff --git a/library/io.po b/library/io.po

 #: ../../library/io.rst:362
 msgid "``True`` if the stream is closed."
 msgstr ""
 msgstr "如果串流已關閉，則為 ``True``。"

 #: ../../library/io.rst:366
 msgid ""
 "Return the underlying file descriptor (an integer) of the stream if it "
 "exists.  An :exc:`OSError` is raised if the IO object does not use a file "
 "descriptor."
 msgstr ""
 "如果串流存在，則回傳其底層的檔案描述器（一個整數）。如果 IO 物件不使用檔案描"
 "述器，則會引發一個 :exc:`OSError` 例外。"

 #: ../../library/io.rst:372
 msgid ""
 "Flush the write buffers of the stream if applicable.  This does nothing for "
 "read-only and non-blocking streams."
 msgstr ""
 "如果適用，清空串流的寫入緩衝區。對於唯讀和非阻塞串流，此操作不會執行任何操"
 "作。"

 #: ../../library/io.rst:377
 msgid ""
 "Return ``True`` if the stream is interactive (i.e., connected to a terminal/"
 "tty device)."
 msgstr ""
 msgstr "如果串流是互動式的（即連接到終端機/tty 設備），則回傳 ``True``。"

 #: ../../library/io.rst:382
 msgid ""
 "Return ``True`` if the stream can be read from. If ``False``, :meth:`!read` "
 "will raise :exc:`OSError`."
 msgstr ""
 "如果串流可以被讀取，則回傳 ``True``。如果是 ``False``，:meth:`!read` 將會引"
 "發 :exc:`OSError` 例外。"

 #: ../../library/io.rst:387
 msgid ""
 "Read and return one line from the stream.  If *size* is specified, at most "
 "*size* bytes will be read."
 msgstr ""
 msgstr "從串流讀取並回傳一行。如果指定了 *size*，則最多讀取 *size* 個位元組。"

 #: ../../library/io.rst:390
 msgid ""
 "The line terminator is always ``b'\\n'`` for binary files; for text files, "
 "the *newline* argument to :func:`open` can be used to select the line "
 "terminator(s) recognized."
 msgstr ""
 "對於二進位檔案，行結束符總是 ``b'\\n'``；對於文字檔案，可以使用 :func:`open` "
 "函式的 *newline* 引數來選擇識別的行結束符號。"

 #: ../../library/io.rst:396
 msgid ""
 "Read and return a list of lines from the stream.  *hint* can be specified to "
 "control the number of lines read: no more lines will be read if the total "
 "size (in bytes/characters) of all lines so far exceeds *hint*."
 msgstr ""
 "從串流讀取並回傳一個含有一或多行的 list。可以指定 *hint* 來控制讀取的行數：如"
 "果到目前為止所有行的總大小（以位元組/字元計）超過 *hint*，則不會再讀取更多"
 "行。"

 #: ../../library/io.rst:400
 msgid ""
 "*hint* values of ``0`` or less, as well as ``None``, are treated as no hint."
 msgstr ""
 msgstr "*hint* 值為 ``0`` 或更小，以及 ``None``，都被視為沒有提供 hint。"

 #: ../../library/io.rst:403
 msgid ""
 "Note that it's already possible to iterate on file objects using ``for line "
 "in file: ...`` without calling :meth:`!file.readlines`."
 msgstr ""
 "請注意，已經可以使用 ``for line in file: ...`` 在檔案物件上進行疊代，而不一定"
 "需要呼叫 :meth:`!file.readlines`。"

 #: ../../library/io.rst:408
 msgid ""
Original file line number	Diff line number	Diff line change
Expand Up		@@ -652,63 +652,76 @@ msgstr "為了方便起見，允許多次呼叫這個方法；然而，只有第

		#: ../../library/io.rst:362
		msgid "``True`` if the stream is closed."
		msgstr ""
		msgstr "如果串流已關閉，則為 ``True``。"

		#: ../../library/io.rst:366
		msgid ""
		"Return the underlying file descriptor (an integer) of the stream if it "
		"exists. An :exc:`OSError` is raised if the IO object does not use a file "
		"descriptor."
		msgstr ""
		"如果串流存在，則回傳其底層的檔案描述器（一個整數）。如果 IO 物件不使用檔案描"
		"述器，則會引發一個 :exc:`OSError` 例外。"

		#: ../../library/io.rst:372
		msgid ""
		"Flush the write buffers of the stream if applicable. This does nothing for "
		"read-only and non-blocking streams."
		msgstr ""
		"如果適用，清空串流的寫入緩衝區。對於唯讀和非阻塞串流，此操作不會執行任何操"
		"作。"

		#: ../../library/io.rst:377
		msgid ""
		"Return ``True`` if the stream is interactive (i.e., connected to a terminal/"
		"tty device)."
		msgstr ""
		msgstr "如果串流是互動式的（即連接到終端機/tty 設備），則回傳 ``True``。"

		#: ../../library/io.rst:382
		msgid ""
		"Return ``True`` if the stream can be read from. If ``False``, :meth:`!read` "
		"will raise :exc:`OSError`."
		msgstr ""
		"如果串流可以被讀取，則回傳 ``True``。如果是 ``False``，:meth:`!read` 將會引"
		"發 :exc:`OSError` 例外。"

		#: ../../library/io.rst:387
		msgid ""
		"Read and return one line from the stream. If size is specified, at most "
		"size bytes will be read."
		msgstr ""
		msgstr "從串流讀取並回傳一行。如果指定了 size，則最多讀取 size 個位元組。"

		#: ../../library/io.rst:390
		msgid ""
		"The line terminator is always ``b'\\n'`` for binary files; for text files, "
		"the newline argument to :func:`open` can be used to select the line "
		"terminator(s) recognized."
		msgstr ""
		"對於二進位檔案，行結束符總是 ``b'\\n'``；對於文字檔案，可以使用 :func:`open` "
		"函式的 newline 引數來選擇識別的行結束符號。"

		#: ../../library/io.rst:396
		msgid ""
		"Read and return a list of lines from the stream. hint can be specified to "
		"control the number of lines read: no more lines will be read if the total "
		"size (in bytes/characters) of all lines so far exceeds hint."
		msgstr ""
		"從串流讀取並回傳一個含有一或多行的 list。可以指定 hint 來控制讀取的行數：如"
		"果到目前為止所有行的總大小（以位元組/字元計）超過 hint，則不會再讀取更多"
		"行。"

		#: ../../library/io.rst:400
		msgid ""
		"hint values of ``0`` or less, as well as ``None``, are treated as no hint."
		msgstr ""
		msgstr "hint 值為 ``0`` 或更小，以及 ``None``，都被視為沒有提供 hint。"

		#: ../../library/io.rst:403
		msgid ""
		"Note that it's already possible to iterate on file objects using ``for line "
		"in file: ...`` without calling :meth:`!file.readlines`."
		msgstr ""
		"請注意，已經可以使用 ``for line in file: ...`` 在檔案物件上進行疊代，而不一定"
		"需要呼叫 :meth:`!file.readlines`。"

		#: ../../library/io.rst:408
		msgid ""
Expand Down