{

{"statement_timeout",PGC_USERSET,CLIENT_CONN_STATEMENT,

gettext_noop("Sets the maximumallowedduration of any statement."),

gettext_noop("Sets the maximum duration of any statement, in milliseconds."),

gettext_noop("A value of 0 turns off the timeout."),

},

{

{"log_autovacuum_min_duration",PGC_SIGHUP,LOGGING_WHAT,

gettext_noop("Sets the minimum executiontime above which "

gettext_noop("Sets the minimum executionmilliseconds above which "

"autovacuum actions will be logged."),

gettext_noop("Zero prints all actions. -1 turns autovacuum logging off."),

{

{"tcp_keepalives_idle",PGC_USERSET,CLIENT_CONN_OTHER,

gettext_noop("Time between issuing TCP keepalives."),

gettext_noop("Seconds between issuing TCP keepalives."),

gettext_noop("A value of 0 uses the system default."),

},

{

{"tcp_keepalives_interval",PGC_USERSET,CLIENT_CONN_OTHER,

gettext_noop("Time between TCP keepalive retransmits."),

gettext_noop("Seconds between TCP keepalive retransmits."),

gettext_noop("A value of 0 uses the system default."),

},

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay =0# 0-100 milliseconds

#vacuum_cost_delay =0ms# 0-100 milliseconds

#vacuum_cost_page_hit = 1# 0-10000 credits

#vacuum_cost_page_miss = 10# 0-10000 credits

#vacuum_cost_page_dirty = 20# 0-10000 credits

# (change requires restart)

#archive_command = ''# command to use to archive a logfile segment

#archive_timeout = 0# force a logfile segment switch after this

#time; 0 is off

#number of seconds; 0 is off

#------------------------------------------------------------------------------

# fatal

# panic (effectively off)

#log_min_duration_statement = -1ms# -1 is disabled, 0 logs all statements

#log_min_duration_statement = -1# -1 is disabled, 0 logs all statements

# and their durations, > 0 logs only

# statements running at least this time.

# statements running at least this number

# of milliseconds

#silent_mode = off# DO NOT USE without syslog or

# logging_collector

#log_lock_waits = off# log lock waits >= deadlock_timeout

#log_statement = 'none'# none, ddl, mod, all

#log_temp_files = -1# log temporary files equal or larger

# than specified size;

# thanthespecified size in kilobytes;

# -1 disables, 0 logs all temp files

#log_timezone = unknown# actually, defaults to TZ environment

# setting

# requires track_counts to also be on.

#log_autovacuum_min_duration = -1# -1 disables, 0 logs all actions and

# their durations, > 0 logs only

# actions running at least that time.

# actions running at least this number

# of milliseconds.

#autovacuum_max_workers = 3# max number of autovacuum subprocesses

#autovacuum_naptime = 1min# time between autovacuum runs

#autovacuum_vacuum_threshold = 50# min number of row updates before

#autovacuum_analyze_scale_factor = 0.1# fraction of table size before analyze

#autovacuum_freeze_max_age = 200000000# maximum XID age before forced vacuum

# (change requires restart)

#autovacuum_vacuum_cost_delay =20# default vacuum cost delay for

# autovacuum,-1 means use

# vacuum_cost_delay

#autovacuum_vacuum_cost_delay =20ms# default vacuum cost delay for

# autovacuum,in milliseconds;

#-1 means usevacuum_cost_delay

#autovacuum_vacuum_cost_limit = -1# default vacuum cost limit for

# autovacuum, -1 means use

# vacuum_cost_limit

#default_transaction_isolation = 'read committed'

#default_transaction_read_only = off

#session_replication_role = 'origin'

#statement_timeout = 0# 0 is disabled

#statement_timeout = 0#in milliseconds,0 is disabled

#vacuum_freeze_min_age = 50000000

#vacuum_freeze_table_age = 150000000

#xmlbinary = 'base64'