Board

ESP32 Dev Module

Device Description

DevKitC

Hardware Configuration

SPI connected Display

Version

latest master

IDE Name

Arduino IDE

Operating System

Mac OS 12.3

Flash frequency

80Mhz

PSRAM enabled

no

Upload speed

115200

Description

after the upgrade to 2.0.3 RC1 the ESPAsyncWebServer Processor is not working as expected, is cutting the output in more points without any placeholders involved. Downgrading to 2.0.2 fix the issue.

I was already using the github master repo till approximately one month ago with no issues, I upgraded today to the latest master and the same code is not working anymore. Downgrading to 2.0.2 fix the issue.

Sketch

server.on("/status", HTTP_GET, [](AsyncWebServerRequest *request){if(!request->authenticate(http_username, http_password)) {return request->requestAuthentication();    }    request->send(LittleFS,"/status.html",String(),false, processor);}).setFilter(ON_STA_FILTER);

Output expected (as per static html file served)

<select name="selectedTA">  <option value="0">100A - 50mA</option>  <option value="1">250A - 0.1A</option>  <option value="2">120A - 40mA</option>  <option value="3">400A - 0.1A</option></select>

Output produced

<select name="selectedTA">   <option value="0">100A - 50mA</option>   <option value="1">250A - 0.1A</option>   <option value="2">120A - 40mA</option>   <option value="3a.append("timezone", timezone);   data.append("tz", tz);   ... (cutted at least 20-30 lines with no reason after value="3)

Other Steps to Reproduce

try to serve a web page (4-5Kb) with processor (in my case from LittleFS), it should cut parts of the output in one or more point, with no placeholders involved in that points.

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.