Repository files navigation

• ESP32-S2 and ESP32-C3 Support
• Development Status
• Installation Instructions
• Decoding Exceptions
• Issue/Bug report template
• ESP32Dev Board PINMAP

If you want to test ESP32-S2 and/or ESP32-C3 through the board manager, please use the development release link:https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json and install the latest 2.0.0 version.

Latest Stable Release

Latest Development Release

• Using Arduino IDE Boards Manager (preferred)
  • Instructions for Boards Manager
• Using Arduino IDE with the development repository
  • Instructions for Windows
  • Instructions for Mac
  • Instructions for Debian/Ubuntu Linux
  • Instructions for Fedora
  • Instructions for openSUSE
• Using PlatformIO
• Building with make
• Using as ESP-IDF component
• Using OTAWebUpdater

You can useEspExceptionDecoder to get meaningful call trace.

Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled asfor reference.

Finally, if you are sure no one else had the issue, follow theISSUE_TEMPLATE while reporting any issue.

Sometimes to program ESP32 via serial you must keep GPIO0 LOW during the programming process