DMXStudio DMX ControllerSee details in the wikihttps://github.com/desantir/DMXStudio/wikiTarget environment:- Tested with Windows 10 32 bitBuild Environment:- Microsoft Visual Studio 2015 or 17To use this you will need one or more of the following:- Enttac USB PRO comatible USB to DMX adapter (such as DMXking ultraDMX Micro ->http://dmxking.com/usbdmx/ultradmxmicro)or- Build your own simple USB-based DMX hardware controller based on the FTDI chip (about $20):- FTDI Basic Breakout - 5Vhttp://www.amazon.com/gp/product/B0068QKQEA/https://www.amazon.com/Sparkfun-Electronics-4446819-FTDI-Cable/dp/B00DJBNDHE (alternate)- TI SN75176BPhttp://www.mouser.com/ProductDetail/Texas-Instruments/SN75176BP/- Micro USB to USB B cablehttp://www.amazon.com/gp/product/B001TH7GUK/- 1x3" breadboardhttp://www.amazon.com/gp/product/B0040Z6OK6- XLR connector- 1 100 Ohm resistor- Project box (optional)http://www.radioshack.com/product/index.jsp?productId=2062280- Wire / soider /etc- The FTDI LIB & DLL from FTDI Corp.http://www.ftdichip.com/Drivers/D2XX.htm- DMX controllable fixture(s) and DMX channel descriptions