|
1 | 1 | #Configuring JetBrains Gateway |
2 | 2 |
|
3 | | -The followingscreenshots outline in more detailhow tocreate a new Connection |
4 | | -for JetBrains Gateway to aCoder workspace. |
| 3 | +The followingwalkthrough detailshow toconnect JetBrains Gateway to |
| 4 | +Coder. |
5 | 5 |
|
6 | 6 | ##Creating a new JetBrains Gateway Connection |
7 | 7 |
|
8 | | -After installing Gateway on your local system, you may connect to a Coder |
9 | | -workspace as follows |
10 | | - |
| 8 | +1.[Install Gateway](https://www.jetbrains.com/help/idea/jetbrains-gateway.html) |
| 9 | +1.[Configure the`coder` CLI](../ides.md#ssh-configuration) |
11 | 10 | 1. Open Gateway, make sure "SSH" is selected under "Remote Development" |
12 | | -2. Click "New Connection" |
13 | | - |
14 | | - |
15 | | - |
16 | | -3. In the resulting dialog, click the gear icon to the right of "Connection:" |
17 | | - |
18 | | - |
19 | | - |
20 | | -4. Hit the "+" button to add a new SSH connection |
21 | | - |
22 | | - |
23 | | - |
24 | | -1. For the Host, enter`coder.<workspace name>` |
25 | | -2. For the Port, enter`22` (this is ignored by Coder) |
26 | | -3. For the Username, enter`coder` |
27 | | -4. For the Authentication Type, select "OpenSSH config and authentication |
28 | | - agent" |
29 | | -5. Make sure the checkbox for "Parse config file~/.ssh/config" is checked. |
30 | | -6. Click "Test Connection" to ensure you setting are ok. |
31 | | -7. Click "OK" |
32 | | - |
33 | | - |
35 | | - |
36 | | -5. Select the connection you just added. |
37 | | - |
38 | | - |
39 | | - |
40 | | -6. Click "Check Connection and Continue" |
41 | | - |
42 | | - |
43 | | - |
44 | | -7. Select the JetBrains IDE for your project and the project directory |
45 | | -1. Use an SSH terminal to your workspace to create a directory or check out |
46 | | - code if you haven't already. |
47 | | - |
48 | | ->Note the JetBrains IDE is installed in the directory `~/. |
49 | | ->cache/JetBrains/RemoteDev/dist` |
50 | | -
|
51 | | - |
52 | | - |
53 | | -8. Click "Download and Start IDE" to connect. |
54 | | - |
55 | | - |
56 | | - |
57 | | - |
| 11 | +1. Click "New Connection" |
| 12 | + |
| 13 | +1. In the resulting dialog, click the gear icon to the right of "Connection:" |
| 14 | + |
| 15 | +1. Hit the "+" button to add a new SSH connection |
| 16 | + |
| 17 | + |
| 18 | +1. For the Host, enter`coder.<workspace name>` |
| 19 | +1. For the Port, enter`22` (this is ignored by Coder) |
| 20 | +1. For the Username, enter`coder` |
| 21 | +1. For the Authentication Type, select "OpenSSH config and authentication |
| 22 | + agent" |
| 23 | +1. Make sure the checkbox for "Parse config file~/.ssh/config" is checked. |
| 24 | +1. Click "Test Connection" to validate these settings. |
| 25 | +1. Click "OK" |
| 26 | + |
| 27 | +1. Select the connection you just added |
| 28 | + |
| 29 | +1. Click "Check Connection and Continue" |
| 30 | + |
| 31 | +1. Select the JetBrains IDE for your project and the project directory. |
| 32 | + SSH into your server to create a directory or check out code if you haven't already. |
| 33 | + |
| 34 | +>Note the JetBrains IDE is remotely installed into`~/. cache/JetBrains/RemoteDev/dist` |
| 35 | +1. Click "Download and Start IDE" to connect. |
| 36 | + |