• How to create a custom widget?
• Forgot your password?
• How can I enable WebGL in my browser?
• Raspberry Pi: Error opening serial port "ttyAMA0"
• Webcam Streaming with Raspberry Pi
• Restream RTSP to M-JPEG
• Connect to an Arduino using WiFi
• Install Native Addons with Node.js v4
• Install Serialport on OS X El Capitan
• Kernel panic issue on macOS Sierra for devices using the CH340G, CH34G or CH34X chipset
• Testing without Arduino board

Custom widget support is only available for CNCjs 1.9.10 or later versions

You can download a working example widget from the releases page ofcncjs-widget-boilerplate

Download:https://github.com/cncjs/cncjs-widget-boilerplate/releases

For details, go tohttps://github.com/cncjs/cncjs-widget-boilerplate

cncjs 1.8 adds multi-account management support to enable secure web access and web socket connections. The web interface will automatically redirect user to theSign In page when at least one user account has been enabled inSettings > Account.

If you forgot your password, find user account settings in the~/.cncrc file, and remove all existing users:

• Linux / Mac:~/.cncrc (e.g./home/pi/.cncrc)
• Windows:%USERPROFILE%\.cncrc (e.g.C:\Users\User Name\.cncrc)

"users": []

Otherwise, you can also set the "enabled" attribute to a false value for all users to disable secure web access. For example:

"users": [  {"id":"......","enabled":false,"name":"admin1","password":"......"   },   {"id":"......","enabled":false,"name":"admin2","password":"......"   }]

Navigate tohttp://webglreport.com/ to make sure your browser support WebGL.

If your browser does not support WebGL due to certain reasons, follow instructions below to enable WebGL:http://superuser.com/questions/836832/how-can-i-enable-webgl-in-my-browser

First, enable hardware acceleration:

• Go to chrome://settings
• Click the+ Show advanced settings button
• In theSystem section, ensure theUse hardware acceleration when available checkbox is checked (you'll need to relaunch Chrome for any changes to take effect)

Then enable WebGL:

• Go to chrome://flags
• Ensure thatDisable WebGL is not activated (you'll need to relaunch Chrome for any changes to take effect)

You may got this error when using the GPIO serial device on the Raspberry Pi:

$ .npm/bin/cnc -vvStarted the server at http://0.0.0.0:8000/.2016-07-17T12:13:40.292Z - error: [cncserver] Error opening serial port"ttyAMA0": err={}

Add a.cncrc file under the login (home) directory (e.g.~/.cncrc) with the following configuration to specify the path/dev/ttyAMA0:

{"ports":[{"comName":"/dev/ttyAMA0","manufacturer":""}]}

Runcnc again and you will see that/dev/ttyAMA0 is available to use:

If you still cannot connect to/dev/ttyAMA0, use the serialport-terminal tool to check if a "Permission denied" error occurred:

$ node_modules/serialport/bin/serialport-terminal.js -p /dev/ttyAMA0 -b 115200Error [Error: Error: Permission denied, cannot open /dev/ttyAMA0]

Follow these steps to fix the permission denied error:

1. Make sure your login account is a member of thedialout group:

$ sudo vim /etc/group

add add your login account if not available:

dialout:x:20:pi,<your_login_account>

2. Remove references to/dev/ttyAMA0 from/boot/cmdline.txt:

The original contents

dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait

and new contents

dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait

3. Disable the getty on that serial port in/etc/inittab by commenting out the following line:

#T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100

4. Reboot

Checkoutmjpg-streamer to learn how tostream JPEG data from the input_raspicam plugin via HTTP, and follow the steps in thisarticle:

1. Make sure you have an updated version ofRaspberry Pi's OS.
2. Installlibv4l-0 package, available in Raspbian:sudo aptitude install libv4l-0.
3. Connect the web camera to USB. The web camera must be Linux compatible; to check this, make sure/dev/video0 file is available onRaspberry Pi, else the camera does not have a Linux driver or required extra configuration to work.
4. Downloadmjpg-streamer-rpi.tar.gz archive onRaspberry Pi and extract it. Destination folder is not relevant. You don't need root access if you are using the default pi user. Go tomjpg-streamer folder, where you extracted thetar.gz file.
5. Openmjpg-streamer.sh file; this is a simple bash script to control the mini-webserver. The header contains some writable parameters, as refresh rate or resolution. The default settings should work in most situations.
6. Start the server with./mjpg-streamer.sh start command in the current folder.
7. Run your prefered web browser and go tohttp://raspberrypi:8080/?action=stream (where raspberrypi is it's IP address). You should see the image from the webcam. Current version has some issues with Chrome, just use Firefox if the image is not refreshed.
8. If the system doesn't work, see themjpg-streamer.log file for debug info.

See below required commands for not-Linux geeks:

$ sudo aptitude install libv4l-0$ ls /dev/video0$ wget http://www.bobtech.ro/get?download=36:mjpg-streamer-rpi$ mv get\?download\=36\:mjpg-streamer-rpi mjpg-streamer-rpi.tar.gz$ tar -zxvf mjpg-streamer-rpi.tar.gz$cd mjpg-streamer$ sudo nano mjpg-streamer.sh$ ./mjpg-streamer.sh start

Once you have finished setup, input the URL in the webcam widget to play the M-JPEG stream:

# Replace raspberrypi with your IP addresshttp://raspberrypi:8080/?action=stream

To change video parameters you have to installv4l2-ctl:

$ sudo apt-get install v4l-utils$ v4l2-ctl --list-ctrls$ v4l2-ctl --set-ctrl brightness=200$ v4l2-ctl --set-ctrl saturation=32

http://www.howtoembed.com/get?download=36:mjpg-streamer-rpi

FFmpeg is available for Windows and Linux, but FFserver is available only on Linux.

Sampleffserver.conf file:

HTTPPort 8090<Feed webcam.ffm>  File /tmp/webcam.ffm  FileMaxSize 50M</Feed><Stream webcam.mjpg>  Feed webcam.ffm  Format mpjpeg  VideoBufferSize 8000  VideoCodec mjpeg  VideoFrameRate 24  VideoSize 640x480  NoAudio</Stream>

After that started server with command:

$ ffserver -d -f ffserver.conf

and run streaming with command:

$ ffmpeg -i "rtsp://<ip-camera>/" http://localhost:8090/webcam.ffm

Now you can input the URL in the webcam widget to play the M-JPEG stream:

http://localhost:8090/webcam.mjpg

These articles might be useful if you want to connect to Arduino using WiFi:

• WiFi your nodebot
• Arduino Wifi With Hi Flying HF-LPT100/USR WIFI232-T

Node.js – Pseudo Terminal (~/dev/ttyV0) – TCP Socket (10.0.1.12:8899)

1. Usesocat to fake a serial terminal:

socat -d -d pty,nonblock,link=$HOME/dev/ttyV0 tcp:10.0.1.12:8899

2. Execute it like this:

node blink.js~/dev/ttyV0

Source:https://github.com/fivdi/onoff/wiki/Node.js-v4-and-native-addons

Runapt-get update to update the system's package list:

sudo apt-get update

Install gcc/g++ 4.8 as below:

sudo apt-get install gcc-4.8 g++-4.8sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.6 20sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 50sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.6 20sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.8 50

Check to see which versions of gcc/g++ are installed:

pi@raspberrypi~ $ gcc --versiongcc (Raspbian 4.8.2-21~rpi3rpi1) 4.8.2Copyright (C) 2013 Free Software Foundation, Inc.This is free software; see thesourcefor copying conditions.  There is NOwarranty; not evenfor MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.pi@raspberrypi~ $ g++ --versiong++ (Raspbian 4.8.2-21~rpi3rpi1) 4.8.2Copyright (C) 2013 Free Software Foundation, Inc.This is free software; see thesourcefor copying conditions.  There is NOwarranty; not evenfor MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

It should now be able to install native addons with io.js v3 or Node.js v4 or higher.

If required, use the following commands to switch between the different version gcc/g++, like so:

sudo update-alternatives --config gccsudo update-alternatives --config g++

If you're running with OS X El Capitan (version: 10.11), and theinstallation fails with errorld: library not found for -lgcc_s.10.5, check out the following ways:

• Check outInstalling the Xcode Command Line Tools.
• If you do not have Xcode installed, just install Xcode 7 from App Store.
• There is an issue with Mac OS X 10.11 and Xcode 6. If your Xcode version is 6.x, you need to upgrade it to Xcode 7, or use this as temporary fix:

cd /usr/local/libsudo ln -s ../../lib/libSystem.B.dylib libgcc_s.10.5.dylib

Download and install the latest driver fromhttps://github.com/adrianmihalko/ch340g-ch34g-ch34x-mac-os-x-driver.

Before you can get started, you will need an Arduino UNO/Nano board based on the ATmega328P. Download the latest Grbl firmware from theGrbl repository, andflash Grbl to an Arduino.

If you don't have an Arduino, check outgrbl-sim and follow the instructions below to compile Grbl into an executable for your computer:

1. Clone this repository into the directory containing the Grbl source code (i.e.<repo>/grbl/), like so:

$ git clone git@github.com:grbl/grbl.git$cd grbl/grbl$ git clone git@github.com:grbl/grbl-sim.git$cd grbl-sim

2. Edit the Grbl-sim Makefile to select the correctPLATFORM = line.
3. Runmake new to compile the Grbl sim. It will create an executable file namedgrbl_sim.exe. See below:

.

4. On Linux, replace the version of simport.sh in the grbl-sim directory withthis updated version (examples/grbl-sim/simport.sh) and run it. It creates a fake serial port (/dev/ttyFAKE) connected to grbl-sim. If it complains about 'socat', install socat via 'sudo apt-get install socat' and perhaps 'apt-get update' before that.)
5. Copy.cncrc fromexamples to the home directory, and runcnc -c ~/.cncrc to start the server. The configuration file should look like below:

{"ports": [        {"comName":"/dev/ttyFAKE","manufacturer":"grbl-sim"        }    ]}

6. Open/dev/ttyFAKE from the Connection widget to interact with the Grbl simulator as if connected to an Arduino with Grbl.