Repository files navigation

Note: this fork is based on my local copy. The author has dropped the repository and does not respond -- amateur

This distro is based on two prominent projects:Armbian andDevuan.It is built in the simplest way, using Devuan debootstrapped system with kernel, dtb,u-boot, and board support packages from Armbian, thus avoiding compilation parties as much as possible.

Armvuan builder uses Armbian's toolkit but it's not a part of it as it may seem.Actually I don't know how this pet project should evolve.Both Armbian and Devuan have their own toolchains for ARM boards and both have fatal flaws:the former is locked to systemd-based distros, the latter has poor support for ARM boards.

Targetted primarily to headless boards, this distro is very minimalisticand does not run any configuration script at first boot.After flashing your microSD card you need to make tweaks to/etc/network/interfacesand write your SSH public key to/root/.ssh/authorized_keys.

The build environment must have the following packages installed(as many as I managed to figure out, in addition to mine -- amateur):

• bc
• binfmt-support
• debootstrap: messy thing, needs to be installed; TODO: check if need to clone from devuan git
• fdisk
• kpartx
• linux-base
• parallel
• parted
• qemu-user-static
• rsync
• u-boot-tools
• udev
• uuid-runtime -- for uuidgen

Armvuan is shipped with the following services enabled:

• armbian-hardware-optimization
• armbian-ramlog

All the rest is up to you. You can convert necessary servicesfrom board support package located in/lib/systemd/system/.Their names start fromarmbian-.

If you cannot connect to a headless board, try the following:

1. Reduce commit to a reasonable value, i.e. 6 in/etc/fstab
2. Disable ramlog by unlinking/etc/rcS.d/S??armbian-ramlog
3. Insert microSD card in and power on your board
4. Wait a couple of minutes
5. Power off, pull microSD card out and examine/var/log

• clone this repository with --recurse-submodules option
• revisecli-armvuan.sh
• runprepare.sh script to patch Armbian toolchain
• look intoarmbian/config/boards for board names
• make an image for your board:

sudo ./armbian/compile.sh armvuan-build BOARD=orangepi-r1 BRANCH=current RELEASE=daedalus

Your image is here:armbian/output/images

They broke u-boot at some point in past. My OrangePI 3 survived only becauseI set up boot process to continue from USB HDD so upgrade failed to find the right boot device.

in dmesg output on my OrangePI 3:

mdio_bus stmmac-0: MDIO device at address 1 is missing.dwmac-sun8i 5020000.ethernet end0: __stmmac_open: Cannot attach to PHY (error: -19)

I suspect u-boot is guilty of USB problems on NanoPI M4v2.

Remember, dist-upgrade is dangerous in Armbian.

This works. I gave it a try fororangepizero but I have no boards for testing yet.

To run this inLXCex I had to create "super-privileged" containerwith entire/dev bound-mounted in it. Otherwise, with autodev, such devices as/dev/loop2p1 appearedon the host system, not in container. The following lines should be added to the container's config:

lxc.autodev = 0lxc.cgroup.devices.allow = c 10:237 rwmlxc.cgroup.devices.allow = b 7:* rwmlxc.cgroup.devices.allow = b 259:* rwmlxc.mount.entry = /dev dev none bind 0 0

You'll probably need this patcharmbian/build#7430