Repository files navigation

This repository contains a Verilog implementation of a 24-hour digital clock designed for FPGA platforms. The design displays hours, minutes, and seconds on a 7-segment display, providing a complete timekeeping solution that can be easily integrated into various FPGA development boards.

• 24-hour time format (00:00:00 to 23:59:59)
• Real-time display on 7-segment displays
• Configurable clock frequency
• Reset functionality
• Efficient display multiplexing

• digital_clock.v - Main implementation of the digital clock
• digital_clock_tb.v - Testbench for simulation and verification

The digital clock consists of several key components:

1. Clock Divider: Converts the 100MHz system clock to a 1Hz clock for timekeeping
2. Time Counter: Tracks seconds, minutes, and hours with appropriate rollover logic
3. Display Controller: Manages the 7-segment display multiplexing
4. 7-Segment Decoder: Converts BCD values to 7-segment display patterns

• FPGA development board (tested on boards with 100MHz clock)
• 6 seven-segment displays
• Reset button

To simulate the design using your preferred Verilog simulator:

# Example for Icarus Verilogiverilog -o digital_clock_sim digital_clock.v digital_clock_tb.vvvp digital_clock_sim

To implement on an FPGA:

1. Add the source files to your project
2. Assign appropriate pins for:
   • System clock (clk)
   • Reset button (reset)
   • Anode signals (an[7:0])
   • 7-segment display signals (seg[6:0])
3. Generate bitstream and program your FPGA

The clock frequency can be adjusted by modifying theCLK_FREQ parameter in thedigital_clock.v file. For simulation purposes, you may want to reduce this value to speed up the simulation process.

The included testbench (digital_clock_tb.v) provides a basic verification environment:

• Applies reset
• Runs the clock for an extended period
• Monitors time values and display outputs