| Part ofa series on |
| Reading |
|---|
 |
Scientific theories and models |
Reading rate |
Reading differences and disabilities |
Words per minute (commonly abbreviated asWPM and sometimes lowercased aswpm) is a measure ofwords processed in a minute, often used as a measurement of the speed of typing,reading orMorse code sending and receiving.
Since words vary in length, for the purpose of measurement of text entry the definition of each "word" is often standardized to be five characters orkeystrokes long in English,[1] including spaces and punctuation. For example, under such a method applied to plain English text the phrase "I run" counts as one word, but "rhinoceros" and "let's talk" would both count as two.
Karat et al. found in one study of averagecomputer users in 1999 that the average rate for transcription was 32.5 words per minute, and 19.0 words per minute for composition.[2] In the same study, when the group was divided into "fast", "moderate", and "slow" groups, the average speeds were 40 wpm, 35 wpm, and 23 wpm, respectively.
With the onset of the era ofdesktop computers andsmartphones, fast typing skills became much more widespread. As of 2019, the average typing speed on a mobile phone was 36.2 wpm with 2.3% uncorrected errors—there were significant correlations with age, level of English proficiency, and number of fingers used to type.[3] Some typists have sustained speeds over 300 wpm for a 15-second typing test with simple English words.[4]
Typically, professionaltypists type at speeds of 43 to 80 wpm, while some positions can require 80 to 95 (usually the minimum required fordispatch positions and other time-sensitive typing jobs), and some advanced typists work at speeds above 120 wpm.[5] Two-finger typists, sometimes also referred to as "hunt and peck" typists, commonly reach sustained speeds of about 37 wpm for memorized text and 27 wpm when copying text, but in bursts may be able to reach much higher speeds.[6] From the 1920s through the 1970s, typing speed (along withshorthand speed) was an important secretarial qualification, and typing contests were popular and often publicized by typewriter companies as promotional tools.
Stenotype keyboards enable the trained user to input text as fast as 360 wpm at very highaccuracy for an extended period, which is sufficient for real-time activities such ascourt reporting orclosed captioning. While training dropout rates are very high—in some cases only 10% or even fewer graduate—stenotype students are usually able to reach speeds of 100–120 wpm within six months, which is faster than most alphanumeric typists.Guinness World Records gives 360 wpm with 97.23% accuracy as the highest achieved speed using a stenotype.[7]
The numeric entry or 10-key speed is a measure of one's ability to manipulate thenumeric keypad found on most modern separate computer keyboards. It is used to measure speed for jobs such asdata entry of number information on items such asremittance advice, bills, or checks, as deposited tolock boxes. It is measured in keystrokes per hour (KPH). Many jobs require a certain KPH, often 8,000 or 10,000.[8]
For an adult population (age range 18–64) the average speed of copying is 68 letters per minute (approximately 13 wpm), with the range from a minimum of 26 to a maximum of 113 letters per minute (approximately 5 to 20 wpm).[9]
A study of police interview records showed that the highest speed fell in the range 120–155 characters per minute, the highest possible limit being 190 characters per minute.[10]
According to various studies the speed of handwriting of 3–7 graders varies from 25 to 94 letters per minute.[11]
Usingstenography (shorthand) methods, this rate increases greatly. Handwriting speeds up to 350 words per minute have been achieved in shorthand competitions.[12]
Words per minute is a common metric for assessingreading speed and is often used in the context of remedial skills evaluation, as well as in the context ofspeed reading, where it is a controversial measure of reading performance.
A word in this context is the same as in the context of speech.
Research done in 2012[13] measured the speed at which subjects read a text aloud, and found the typical range of speeds across 17 different languages to be 184±29 wpm or 863±234 characters per minute. However, the number of wpm varied between languages, even for languages that use the Latin orCyrillic alphabets: as low as 161±18 forFinnish and as high as 228±30 for English. This was because different languages have different average word lengths (longer words in such languages as Finnish and shorter words in English). However, the number of characters per minute tends to be around 1000 for all the tested languages. For the tested Asian languages that use particular writing systems (Arabic, Hebrew, Chinese, Japanese) these numbers are lower.
Scientific studies have demonstrated that reading—defined here as capturing and decoding all the words on every page—faster than 900 wpm is not feasible given the limits set by the anatomy of the eye.[14]
Whileproofreading materials, people are able to read English at 200 wpm on paper, and 180 wpm on a monitor.[15] [Those numbers from Ziefle, 1998, are for studies that used monitors prior to 1992. See Noyes & Garland 2008 for a modern tech view of equivalence.]
Audiobooks are recommended to be 150–160 words per minute, which is the range that people comfortably hear and vocalize words.[16]
Slide presentations tend to be closer to 100–125 wpm for a comfortable pace,[17]auctioneers can speak at about 250 wpm,[18] and the fastest speakingpolicy debaters speak from 350[19] to over 500 words per minute.[20] Internet speech calculators show that various things influence words per minute including nervousness.[18]
An example of anagglutinative language, the average rate ofTurkish speech is reported to be about 220 syllables per minute. When the time spent for the silent parts of speech are removed, the so-called average articulation rate reaches 310 syllables per minute.[21] The average number of syllables per (written) word has been measured as 2.6.[22][23] For a comparison,Flesch has suggested that the conversational English for consumers aims 1.5 syllables per word,[24] although these measures are dependent on corpus.
John Moschitta Jr. was listed inGuinness World Records, for a time, as the world's fastest speaker, being able to talk at 586 wpm.[25] He has since been surpassed bySteve Woodmore, who achieved a rate of 637 wpm.[26]
In the realm ofAmerican Sign Language, the American Sign Language University (ASLU) specifies a cutoff proficiency for students who clock a signing speed of 110-130 wpm.[27]
Morse code uses variable length sequences of short and long durationsignals (dits and dahs, colloquially called dots and dashes) to represent source information[28]e.g., sequences for the letter "K" and numeral "2" are respectively ( ▄▄▄ ▄ ▄▄▄ ) and ( ▄ ▄ ▄▄▄ ▄▄▄ ▄▄▄ ). This variability complicates the measurement of Morse code speed rated in words per minute. Using telegram messages, the average English word length is about five characters, each averaging 5.124 dot durations orbaud. Spacing between words should also be considered, being seven dot durations in the USA and five in British territories. So the average British telegraph word was 30.67 dot times.[29] So the baud rate of a Morse code is50⁄60 × word per minute rate.
It is standard practice to use two different suchstandard words to measure Morse code speeds in words per minute. The standard words are: "PARIS" and "CODEX". In Morse code "PARIS" has a dot duration of 50, while "CODEX" has 60.
Although many countries no longer require it for licensing, Morse is still widely used byamateur radio ("ham") operators. Experienced hams routinely send Morse at 20 words per minute, using manually operated handtelegraph keys; enthusiasts such as members ofThe CW Operators' Club routinely send and receive Morse code at speeds up to 60 wpm. The upper limit for Morse operators attempting to write down Morse code received by ear using paper and pencil is roughly 20 wpm. Many skilled Morse code operators can receive Morse code by ear mentally without writing down the information at speeds up to 70 wpm.[30] To write down the Morse code information manually at speeds higher than 20 wpm it is usual for the operators to use a typewriter or computer keyboard to enable higher speed copying.
In the United States a commercial radiotelegraph operator's license is still issued, although there is almost no demand for it, since for long distance communication ships now use the satellite-basedGlobal Maritime Distress and Safety System. Besides a written examination, proficiency at receiving Morse at 20 wpm plain language and 16 wpm in code groups must be demonstrated.[31]
High-speed telegraphy contests are still held. The fastest Morse code operator wasTheodore Roosevelt McElroy copying at 75.6 wpm using a typewriter at the 1939 world championship.[32]