 W7-X in 2011 | |
| Device type | Stellarator |
|---|---|
| Location | Greifswald,Germany |
| Affiliation | Max Planck Institute for Plasma Physics |
| Technical specifications | |
| Major radius | 5.5 m (18 ft) |
| Minor radius | 0.53 m (1 ft 9 in) |
| Plasma volume | 30 m3 |
| Magnetic field | 3 T (30,000 G) |
| Heating power | 14 MW |
| Plasma temperature | (6–13)×107 K |
| History | |
| Year(s) of operation | 2015–present |
| Preceded by | Wendelstein 7-AS |
| Links | |
| Website | https://www.ipp.mpg.de/w7x |
TheWendelstein 7-X (abbreviatedW7-X) reactor is an experimentalstellarator built inGreifswald,Germany, by theMax Planck Institute for Plasma Physics (IPP), and completed in October 2015.[1][2] Its purpose is to advancestellarator technology: though this experimental reactor will not produce electricity, it is used to evaluate the main components of a futurefusion power plant; it was developed based on the predecessorWendelstein 7-AS experimental reactor.
As of 2023[update], the Wendelstein 7-X reactor is the world's largest stellarator device.[3] After two successful operation phases ending in October 2018, the reactor was taken offline for upgrades.[4][5] The upgrade was completed in 2022. New fusion experiments in February 2023 demonstrated longer confinement and increased power.[6] The goal of this phase is to gradually increase power and duration for up to 30 minutes of continuous plasma discharge, thus demonstrating an essential feature of a future fusion power plant: continuous operation.[7][8]
The name of the project, referring to the mountainWendelstein inBavaria, was decided at the end of the 1950s, referencing the preceding project fromPrinceton University under the nameProject Matterhorn.[9]
The research facility is an independent partner project of theMax Planck Institute for Plasma Physics with theUniversity of Greifswald.
The Wendelstein 7-X device is based on a five-field-periodHelias configuration. It is mainly atoroid, consisting of 50 non-planar and 20 planarsuperconductingmagneticcoils, 3.5 m high, which induce amagnetic field that prevents theplasma from colliding with the reactor walls. The 50 non-planar coils are used for adjusting the magnetic field. It aims for aplasma density of 3×1020 particles per cubic metre, and aplasma temperature of 60–130 megakelvins (MK).[1]
The W7-X is optimised along thequasi-isodynamic principle.[10]
The main components are the magnetic coils,cryostat, plasma vessel,divertor and heating systems.[11]
The coils (NbTi in aluminium[11]) are arranged around a heat insulating cladding with a diameter of 16 metres, called the cryostat. A cooling device produces enough liquid helium to cool down the magnets and their enclosure (about 425 metric tons of "cold mass") tosuperconductivity temperature (4 K[12]). The coils will carry 12.8 kA current and create a field of up to 3 teslas.[12]
The plasma vessel, built of 20 parts, is on the inside adjusted to the complex shape of the magnetic field. It has 254 ports (holes) for plasma heating and observation diagnostics. The whole plant is built of five nearly identical modules, which were assembled in the experiment hall.[11]
The heating system[13] includes high powergyrotrons forelectron cyclotron resonance heating (ECRH), which will deliver up to 15 MW of heating to the plasma.[14] For operational phase 2 (OP-2), after completion of the full armor/water-cooling, up to 8 megawatts ofneutral beam injection will also be available for 10 seconds.[15] Anion cyclotron resonance heating (ICRH) system will become available for physics operation in OP1.2.[16]
A system ofsensors and probes based on a variety of complementary technologies will measure key properties of the plasma, including the profiles of the electron density and of the electron and ion temperature, as well as the profiles of important plasma impurities and of the radial electric field resulting from electron and ion particle transport.[17]
The German funding arrangement for the project was negotiated in 1994, establishing the Greifswald Branch Institute of the IPP in the north-eastern corner of the recently integratedEast Germany. Its new building was completed in 2000. Construction of the stellarator was originally expected to reach completion in 2006. Assembly began in April 2005. Problems with the coils took about 3 years to fix.[11] The schedule slipped into late 2015.[11][18][19]
A three-laboratory American consortium (Princeton, Oak Ridge, and Los Alamos) became a partner in the project, paying €6.8 million of the eventual total cost of €1.06 billion.[20] In 2012, Princeton University and the Max Planck Society announced a new joint research center in plasma physics,[21] to include research on W7-X.
The end of the construction phase, which required more than 1 million assembly hours,[22] was officially marked by an inauguration ceremony on 20 May 2014.[23] After a period of vessel leak-checking, beginning in the summer of 2014, the cryostat wasevacuated, and magnet testing was completed in July 2015.[12]
The aim for operation phase 1 (OP 1.1), beginning 10 December 2015, was to conduct integrated testing of the most important systems as quickly as possible and to gain first experience with the physics of the machine.[24][25] On that first day, the reactor successfully produced helium plasma (with temperatures of about 1 MK) for about 0.1s. For this initial test with about 1 mg ofhelium gas injected into the evacuated plasma vessel, microwave heating was applied for a short 1.3 MW pulse.[26]
More than 300 discharges with helium were done in December and January with gradually increasing temperatures finally reaching six million degrees Celsius, to clean the vacuum vessel walls and test the plasma diagnostic systems. Then, on 3 February 2016, production of the first hydrogen plasma initiated the science program. The highest temperature plasmas were produced by four-megawatt microwave heater pulses lasting one second; plasma electron temperatures reached 100 MK, while ion temperatures reached 10 MK. More than 2,000 pulses were conducted before shutdown.[27]
Five poloidal graphite limiters served as the main plasma-facing components during this first campaign (instead of the divertor modules). Experimental observations confirmed 3D modeling predictions that showed heat and particle flux deposition patterns on the limiters in clear correlation with the lengths of the open magnetic field lines in the plasma boundary.[28][29]
Such tests were planned to continue for about a month, followed by a scheduled shut-down to open the vacuum vessel and line it with protective carbon tiles and install a "divertor" for removing impurities and heat from the plasma. The science program continued while gradually increasing discharge power and duration.[30] The special magnetic field topology was confirmed in 2016.[31][32]
Operational phase 1 (OP 1.1) concluded 10 March 2016[24][33] and an upgrade phase began.
Operational phase 1 continued (OP 1.2) in 2017[34] to test the (uncooled) divertor.[35][24][36]
In June 2018 a record ion temperature of about 40 million degrees, a density of 0.8 × 1020 particles/m3, and a confinement time of 0.2 second yielded a record fusion product of 6 × 1026 degree-seconds per cubic metre.[37]
During the last experiments of 2018, the density reached 2 × 1020 particles/m3 at a temperature of 20 million degrees. With good plasma values, long-lasting plasmas with long discharge times of 100 seconds were obtained. Energy content exceeded 1 megajoule.[38][39][40][41]
In 2021 an analysis of X-ray imaging crystal spectrometer data collected in the 2018 experiment substantially reduced troublingneoclassical transport heat loss. Collisions between heated particles cause some to escape the magnetic field. This was due to magnetic field cage optimization that was essential in achieving the record results.[42][43]
In 2025 a fuel injector that combined continuous refueling with pulsed heating was tested. Over 43 seconds, 90 hydrogen pellets fired into the plasma at up to 800 metres (2,600 feet) per second heated it to a peak temperature of 30 million C. Energy turnover increased to 1.8 gigajoules over a six-minute run, exceeding the 1.3 gigajoules produced in February 2023. It exceeded the record achieved by theExperimental Advanced Superconducting Tokamak (EAST) in China in 2025.[44][45]
| Date | Event |
|---|---|
| 1980 | Planning initiated[46][47] |
| 1994 | Project initiated |
| 2005 | Assembly began |
| 2014 | Inaugurated |
| December 2015 | Begin operational phase OP1.1 |
| 2015 | Successful helium plasma test at 1 MK for ~0.1 s |
| 2016 | Hydrogen plasma at 80 MK for 0.25 s |
| March 2016 | End OP1.1, begin upgrade phase[24][48] |
| June 2017 | Begin operational phase OP1.2 |
| June 2018 | Fusiontriple product of 6 × 1026 degree-second/m3[49] |
| November 2018 | End OP1.2, begin upgrade phase |
| August 2022[50] | Final assembly step with water-coolers finished |
| February 2023[6] | Start of OP2, demonstrated steady-state operation at higher power levels |
| September 2024[51] | OP2.2: September 2024 – December 2024 increase plasma parameters |
| February 2025[51] | OP2.3: February 2025 – May 2025 increase plasma parameters, world record triple product for long duration discharge[52] |
| June 2025[51] | Maintenance: June 2025 – August 2026 |
| August 2026[51] | OP2.4: August 2026 – December 2026 |
| February 2027[51] | OP2.5: February 2027 – May 2027 |
Financial support for the project is about 80% from Germany and about 20% from the European Union. 90% of German funding comes from the federal government and 10% from the state government ofMecklenburg-Vorpommern. The total investment for the stellarator itself over 1997–2014 amounted to €370 million, while the total cost for the IPP site inGreifswald including investment plus operating costs (personnel and material resources) amounted to €1.06 billion for that 18-year period. This exceeded the original budget estimate, mainly because the initial development phase was longer than expected, doubling the personnel costs.[53]
In July 2011, the President of theMax Planck Society,Peter Gruss, announced that the United States would contribute $7.5 million under the program "Innovative Approaches to Fusion" of theUnited States Department of Energy.[54]
Fusion power, processes and devices | |||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Core topics |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Processes, methods |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Devices, experiments |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Divisions |
|  |
|---|---|---|
| Institutions |
| |
| Independent partners | ||
| Miscellaneous | ||
| Categories, lists | ||
