 A welder making boilers for a ship,Combustion Engineering Company, Chattanooga, Tennessee in 1942 | |
| Occupation | |
|---|---|
| Names | Welder |
Occupation type | Vocational |
Activity sectors | Construction Industrial manufacturing Shipbuilding |
| Description | |
| Competencies | Manual dexterity Math Reading and comprehension |
Education required | Industrial Training Institute (ITI),Apprenticeship |
Related jobs | Boilermaker,carpenter,electrician,plumber |
Awelder is a person or equipment thatfuses materials together. The term welder refers to the operator, the machine is referred to as thewelding power supply. The materials to be joined can bemetals (such assteel,aluminum,brass,stainless steel etc.) or varieties ofplastic orpolymer. Welders typically have to have gooddexterity and attention to detail, as well as technical knowledge about the materials being joined and best practices in the field.[1][2]
Welding, without the proper precautions appropriate for the process, can be a dangerous and unhealthy practice. However, with the use of new technology and proper protection, the risks of injury and death associated with welding can be greatly reduced. Because many common welding procedures involve an open electric arc or a flame, the risk of burns is significant. To prevent them, welders wearpersonal protective equipment in the form of heavyleathergloves and protective long sleeve jackets to avoid exposure to extreme heat and flames. Additionally, the brightness of the weld area leads to a condition calledarc eye in whichultraviolet light causes the inflammation of thecornea and can burn theretinas of the eyes. Full facewelding helmets with dark face plates are worn to prevent this exposure, and in recent years, new helmet models have been produced that feature a faceplate that self-darkens upon exposure to high amounts of UV light. To protect bystanders, opaque welding curtains often surround the welding area. These curtains, made of apolyvinyl chloride plastic film, shield nearby workers from exposure to the UV light from the electric arc, but should not be used to replace thefilter glass used in helmets.[3][4]
Welders are also often exposed to dangerous gases andparticulate matter. Processes like flux-cored arc welding and shielded metal arc welding producesmoke containing particles of various types ofoxides, which in some cases can lead to medical conditions likemetal fume fever. The size of the particles in question tends to influence thetoxicity of the fumes, with smaller particles presenting a greater danger. Additionally, many processes produce fumes and various gases, most commonlycarbon dioxide andozone, that can prove dangerous if ventilation is inadequate. Furthermore, because the use of compressed gases and flames in many welding processes pose an explosion and fire risk, some common precautions include limiting the amount ofoxygen in the air and keeping combustible materials away from the workplace.[3] Welders with expertise in welding pressurized vessels, including submarine hulls, industrial boilers, and power plant heat exchangers and boilers, are generally referred to asboilermakers.[5]
A lot of welders relate to getting small electrical shocks from their equipment. Occasionally, welders might work in damp crowded environments and they consider it to be a "part of the job." Welders can be shocked by faulty conditions in the welding circuit, or, from the work lead clamp, a grounded power tool that is on the bench (the workpiece or the electrode). All of these types of shocks come from the welding electrode terminal. Often these shocks are minor and are misdiagnosed as being an issue with a power tool or the power supply to the welder's area. However, the more likely cause is from stray welding current which occurs when current from the welding cables leaks into the welder's work area. Often this is not a serious problem, however, under the right circumstances, this can be fatal to the welder or anyone else inside the work area. When a welder feels a shock, they should take a minute to inspect the welding cables and ensure that they are clean and dry, and, that there are no cracks or gouges out of the rubber casing around the wire. These precautions may be life-saving to the welders.[6]
Notable people who have worked as welders include:
| International | |
|---|---|
| National | |
