Vauxhall 20 22 and 16-20 A
22.4 horsepower A12 3½-litre, 1912
Overview
Manufacturer	Vauxhall
Production	October 1908 to 1915
Assembly	Luton Bedfordshire
Designer	Laurence Pomeroy
Powertrain
Engine	4-cylinder inline 186 cu in (3,054 cc) 208 cu in (3,402 cc)[1]
Transmission	manual: 4-speed and reverse (some early cars 3 speed) clutch early cars— cone later cars— multi-plate in graphite final drive by—[1]
Dimensions
Wheelbase	2,921.0 mm (115 in) 3,124.2 mm (123 in)[1]
Length	width and height depending on coachwork
Kerb weight	depends on coachwork

TheVauxhall 20 h.p. chassis code A, was a four-cylinder medium-sized car manufactured byVauxhall from 1908 to 1914 with one more built in 1920. It was the first production Vauxhall designed byLaurence Pomeroy. It became a highly acclaimed 3 litre of its day and atBrooklands on 26 October 1910 it became the first 20 hp car to exceed 100 mph (160 km/h).^{[citation needed]}

Laurence Pomeroy had joined Vauxhall in 1907 as an assistant draughtsman at the age of twenty-two. He first made his mark at the 1908 RAC and Scottish Reliability Trial, held in June of that year. His first prototype, a development of Vauxhall's 12-16 and named Y1, had outstanding success showing excellent hill climbing ability with an aggregate of 37 seconds less time in the hill climbs than any other car in its class and unparalleled speeds around the Brooklands circuit. His Vauxhall was so far ahead of all cars whatever class that the driver could relax, accomplishing the 200 miles (320 km) at an average speed of 46 mph (74 km/h), when the car was capable of 55 mph (89 km/h). It went on to win class E of the Trial. That design was put into production in 1908 as Vauxhall's 20 hp offering. Four distinct variations were produced between 27 October 1908 and the end of production in 1914. One last car was put together in 1920.^[1]

The 3-litre side-valvemonobloc engine was provided with forced lubrication . The camshaft and magneto were gear-driven until the 16-20 when it was changed to chain drive.^[1]

Reviewing the exhibits at the North of England Motor Show at the beginning of 1912 the Manchester Guardian reported that the 20 h.p. engine had been given for 1912 new light connecting rods of very high grade steel and pistons reduced in weight to give smooth running.^[2]

The A09 and A11 were supplied with a four-speed gearbox though some of the earliest cars retained the three-speed gearboxes of the 12-16 and at least 70 of the first cars also retained the sheet copper sump of their predecessor. There was a major revision of the chassis for the A12 and for the 16-20 both engine and chassis underwent major redesign.^[1]

In November 1912 immediately before the opening of the Olympia Show Vauxhall announced their full range for 1913 would be four chassis:

• 16-20 hp 4-cylinder 90 x 120 mm chassis £395
• 25 hp 4-cylinder 95 x 140 mm chassis £465 (replaces the 20 hp)
• 25 hpPrince Henry chassis £495
• 35 hp six-cylinder 95 x 120 mm chassis £625

all were to have 4-speed gearboxes^[3]

See the table^[1] below for more information.

Capable of up to 100 mph (160 km/h) the A-Type Vauxhall was one of the most acclaimed 3-litre cars of its day,^{[citation needed]} achieving many records for out-right speed and high speed endurance, within the 21 hp limit, as well as having had some parental involvement in the conception of both thePrince Henry and the30-98 Vauxhalls.^[1]

Fewer than two dozen survive today out of the 950 produced.^[1]

Wikimedia Commons has media related toVauxhall 16-20.

Wikimedia Commons has media related toVauxhall 20 A12.

• Vauxhall vehicles
• 1910s cars
• 1900s cars

• Webarchive template wayback links
• Use British English from June 2017
• Use dmy dates from June 2017
• Articles with short description
• Short description is different from Wikidata
• All articles with unsourced statements
• Articles with unsourced statements from April 2010
• Commons category link is on Wikidata
• Commons category link is locally defined