Atrailing cone (also atrailing static cone or, incorrectly, atrailing wire) is an aviation calibration tool first developed and tested in the 1950s and 1960s as a simple means of calibrating the static pressure (altitude reporting) error of an aircraft'spitot-static system.[1] It does this by giving an accurate measurement of the ambientatmospheric pressure (static pressure) well clear of the aircraft'sfuselage.[2] The trailing cone system trails at least one fuselage length behind the aircraft (SpaceAge Control) via a high-strength pressure tube. Static pressure is measured forward of the cone by several static ports.[3] The cone stabilizes and aligns the ports relative to the freestream airflow.[4]
The FAA states inAdvisory Circular AC 91-85A:"Where precision flight calibrations are used to quantify or verify altimetry system performance they may be accomplished by any of the following methods. Flight calibrations should only be performed once appropriate ground checks have been completed. Uncertainties in application of the method must be assessed and taken into account in the data package.
