TheTorpedo Data Computer (TDC) was an earlyelectromechanicalanalog computer used fortorpedofire-control onAmericansubmarines duringWorld War II.Britain,Germany, andJapan also developed automated torpedo fire control equipment, but none were as advanced as theUS Navy's TDC,[1] as it was able to automatically track the target rather than simply offering an instantaneous firing solution. This unique capability of the TDC set the standard for submarine torpedofire control during World War II.[2][3] Replacing the previously standard hand-heldslide rule-type devices (known as the "banjo" and "Is/Was"),[4] the TDC was designed to provide fire-control solutions for submarine torpedo firing against surface ships.[5]
The TDC was a rather bulky addition to the sub'sconning tower and required two extra crewmen: one as an expert in its maintenance, the other as its actual operator. Despite these drawbacks, the use of the TDC was an important factor in the successfulcommerce raiding program conducted by American submarines during thePacific campaign of World War II. Accounts of the American submarine campaign in the Pacific often cite the use of TDC.[6][7] Some officers became highly skilled in its use,[8] and the Navy set up a training school for operation of the device.[9]
Twoupgraded World War II-era U.S. Navy fleet submarines (USS Tusk andCutlass) with their TDCs continue to serve withTaiwan's navy andU.S. Nautical Museum staff are assisting them with maintaining their equipment.[10] The museum also has a fully restored and functioning TDC fromUSS Pampanito, docked inSan Francisco.
The problem of aiming atorpedo has occupied military engineers sinceRobert Whitehead developed the modern torpedo in the 1860s. These early torpedoes ran at a preset depth on a straight course (consequently they are frequently referred to as "straight runners"). This was the state of the art in torpedo guidance until the development of thehoming torpedo during the latter part ofWorld War II.[11] The vast majority of submarine torpedoes during World War II were straight running, and these continued in use for many years after World War II.[12] In fact, two World War II-era straight running torpedoes — fired by the British nuclear-powered submarineHMS Conqueror — sankARA General Belgrano in 1982.
DuringWorld War I, computing a target intercept course for a torpedo was a manual process where the fire control party was aided by mechanical calculator/sights[13] or variousslide rules[14] – the U.S. examples were theMark VIII Angle Solver (colloquially called the "banjo", for its shape), and the "Is/Was" circular sliderule (Nasmith Director), for predicting where a target will be based on where it is now and was.[15] These were often "woefully inaccurate",[16] which helps explain why torpedo spreads were advised.
During World War II, Germany,[17] Japan,[18] and the United States each developedanalog computers to automate the process of computing the required torpedo course.[19]
In 1932, theBureau of Ordnance (BuOrd) initiated development of the TDC withArma Corporation andFord Instruments.[20] This culminated in the "very complicated" Mark 1 in 1938.[20] This was retrofitted into older boats, beginning withDolphin and up through the newestSalmons.[20]
The first submarine designed to use the TDC wasTambor,[21] launched in 1940 with the Mark III, located in theconning tower.[20] (This differed from earlier outfits.)[22] It proved to be the best torpedo fire control system ofWorld War II.[23]
In 1943, the Torpedo Data Computer Mark IV was developed to support theMark 18 torpedo.[24][25]
Both the Mk III and Mk IV TDC were developed byArma Corporation (now American Bosch Arma).
A straight-running torpedo has agyroscope-based control system that ensures that the torpedo will run a straight course.[26] The torpedo can run on a course different from that of the submarine by adjusting a parameter called the gyro angle, which sets the course of the torpedo relative to the course of the submarine (see Figure 2). The primary role of the TDC is to determine the gyro angle setting required to ensure that the torpedo will strike the target.
Determining the gyro angle required the real-time solution of a complextrigonometric equation (seeEquation 1 for a simplified example). The TDC provided a continuous solution to this equation using data updates from the submarine's navigation sensors and the TDC's target tracker. The TDC was also able to automatically update all torpedo gyro angle settings simultaneously with a fire control solution, which improved the accuracy over systems that required manual updating of the torpedo's course.[27]
The TDC enables the submarine to launch the torpedo on a course different from that of the submarine, which is important tactically. Otherwise, the submarine would need to be pointed at the projected intercept point in order to launch a torpedo.[28] Requiring the entire vessel to be pointed in order to launch a torpedo would be time consuming, require precise submarine course control, and would needlessly complicate the torpedo firing process. The TDC with target tracking gives the submarine the ability to maneuver independently of the required target intercept course for the torpedo.
As is shown in Figure 2, in general, the torpedo does not actually move in a straight path immediately after launch and it does not instantly accelerate to full speed, which are referred to as torpedo ballistic characteristics. The ballistic characteristics are described by three parameters: reach, turning radius, and corrected torpedo speed. Also, the target bearing angle is different from the point of view of the periscope versus the point of view of the torpedo, which is referred to as torpedo tube parallax.[29] These factors are a significant complication in the calculation of the gyro angle, and the TDC must compensate for their effects.
Straight running torpedoes were usually launched in salvo (i.e. multiple launches in a short period of time)[30] or a spread (i.e. multiple launches with slight angle offsets)[30] to increase the probability of striking the target given the inaccuracies present in the measurement of angles, target range, target speed, torpedo track angle, and torpedo speed.
Salvos and spreads were also launched to strike tough targets multiple times to ensure their destruction.[31] The TDC supported the firing of torpedo salvos by allowing short time offsets between firings and torpedo spreads by adding small angle offsets to each torpedo's gyro angle. Before thesinking ofSouth Korea'sROKS Cheonan byNorth Korea in 2010, the last warship sunk by a submarine torpedo attack, ARAGeneral Belgrano in 1982, was struck by two torpedoes from a three torpedo spread.[32]
To accurately compute the gyro angle for a torpedo in a general engagement scenario, the target course, speed, range, and bearing must be accurately known. During World War II, target course, range, and bearing estimates often had to be generated using periscope observations, which were highly subjective and error prone. The TDC was used to refine the estimates of the target's course, range, and bearing through a process of
Estimating the target's course was generally considered the most difficult of the observation tasks. The accuracy of the result was highly dependent on the experience of the skipper. During combat, the actual course of the target was not usually determined but instead the skippers determined a related quantity called "angle on the bow." Angle on the bow is the angle formed by the target course and the line of sight to the submarine. Some skippers, likeRichard O'Kane, practiced determining the angle on the bow by looking atImperial Japanese Navy ship models mounted on a calibratedlazy Susan through an inverted binocular barrel.[33]
To generate target position data versus time, the TDC needed to solve the equations of motion for the target relative to the submarine. The equations of motion are differential equations and the TDC used mechanical integrators to generate its solution.[34]
The TDC needed to be positioned near otherfire control equipment to minimize the amount of electromechanical interconnect. Because submarine space within the pressure hull was limited, the TDC needed to be as small as possible. On World War II submarines, the TDC and other fire control equipment was mounted in theconning tower, which was a very small space.[35]The packaging problem was severe and the performance of some early torpedo fire control equipment was hampered by the need to make it small.[36] It had an array of handcranks, dials, and switches for data input and display.[37] To generate a fire control solution, it required inputs on
The TDC performed thetrigonometric calculations required to compute a target intercept course for the torpedo. It also had an electromechanical interface to the torpedoes, allowing it to automatically set courses while torpedoes were still in their tubes, ready to be fired.
The TDC's target tracking capability was used by the fire control party to continuously update the fire control solution even while the submarine was maneuvering. The TDC's target tracking ability also allowed the submarine to accurately fire torpedoes even when the target was temporarily obscured by smoke or fog.
Since the TDC performed two separate functions, generating target position estimates and computing torpedo firing angles, the TDC consisted of two types of analog computers:
The equations implemented in the angle solver can be found in the Torpedo Data Computer manual.[40] The Submarine Torpedo Fire Control Manual[41] discusses the calculations in a general sense and a greatly abbreviated form of that discussion is presented here.
The general torpedo fire control problem is illustrated in Figure 2. The problem is made more tractable if we assume:
As can be seen in Figure 2, these assumptions are not true in general because of the torpedo ballistic characteristics and torpedo tube parallax. Providing the details as to how to correct the torpedo gyro angle calculation for ballistics and parallax is complicated and beyond the scope of this article. Most discussions of gyro angle determination take the simpler approach of using Figure 3, which is called the torpedo fire control triangle.[6][7] Figure 3 provides an accurate model for computing the gyro angle when the gyro angle is small, usually less than 30°.[42]
The effects of parallax and ballistics are minimal for small gyro angle launches because the course deviations they cause are usually small enough to be ignorable. U.S. submarines during World War II preferred to fire their torpedoes at small gyro angles because the TDC's fire control solutions were most accurate for small angles.[43]
The problem of computing the gyro angle setting is a trigonometry problem that is simplified by first considering the calculation of the deflection angle, which ignores torpedo ballistics and parallax.[44]For small gyro angles,θGyro ≈θBearing −θDeflection. A direct application of thelaw of sines to Figure 3 produces Equation1.
| 1 |
where
Range plays no role in Equation1, which is true as long as the three assumptions are met. In fact, Equation1 is the same equation solved by the mechanical sights ofsteerable torpedo tubes used on surface ships during World War I and World War II. Torpedo launches from steerable torpedo tubes meet the three stated assumptions well. However, an accurate torpedo launch from a submarine requires parallax and torpedo ballistic corrections when gyro angles are large. These corrections require knowing range accurately. When the target range was not known, torpedo launches requiring large gyro angles were not recommended.[45]
Equation1 is frequently modified to substitute track angle for deflection angle (track angle is defined in Figure 2,θTrack=θBow+θDeflection). This modification is illustrated with Equation2.
| 2 |
whereθTrack is the angle between the target ship's course and the torpedo's course.
A number of publications[46][47] state the optimum torpedo track angle as 110° for a Mk 14 (46 knot weapon). Figure 4 shows a plot of the deflection angle versus track angle when the gyro angle is 0° (i.e..,θDeflection=θBearing).[48] Optimum track angle is defined as the point of minimum deflection angle sensitivity to track angle errors for a given target speed. This minimum occurs at the points of zero slope on the curves in Figure 4 (these points are marked by small triangles).
The curves show the solutions of Equation2 for deflection angle as a function of target speed and track angle. Figure 4 confirms that 110° is the optimum track angle for a 16-knot (30 km/h) target, which would be a common ship speed.[49]
As with the angle solver, the equations implemented in the position keeper can be found in the Torpedo Data Computer manual.[40] Similar functions were implemented in the rangekeepers for surface ship-based fire control systems. For a general discussion of the principles behind the position keeper, seeRangekeeper.
