 | |
| Product type | Coachbuilder |
|---|---|
| Country | United Kingdom |
Tickford is an automobile engineering and testing business inNewport Pagnell, Buckinghamshire, known fortuning and such products as the 140 mph TickfordTurboCapri.
Under the name Salmons & Sons and their Tickford products the firm has an almost two century-long history of coachbuilding.
Tickford Limited grew from the very substantial coachbuilding business founded in the 1820s by Joseph Salmons later known as Salmons and Sons atTickford on the east side of Newport Pagnell. Their products bore the brand-nameTickford. With the advent of theinternal combustion engine, Salmons & Sons progressed into developing coachbuilt cars as early as 1898 and prospered.[1] In 1925 they announced their Tickford"All Weather" body, a drophead with the hood mechanism operated by inserting and turning a handle in the rear quarter-panel.[2]
During the 1930s Salmons built standard catalogued Tickford drophead bodies for: BSA, Daimler, Hillman, Lanchester, MG, Rover, Standard, Triumph, Vauxhall and Wolseley.[3]
By the late 1930s 450 people were employed producing 30 car bodies a week. Their London showrooms were at 6–9 Upper Saint Martin's Lane WC2.
.jpg)
In 1943 following Ian Boswell's purchase of Salmons & Sons Limited the company changed its name to its trademark, Tickford Limited.[4]
.jpg)
In late 1955 Tickford Limited was bought byDavid Brown,[5] owner ofAston Martin since 1947 andLagonda since 1948 both always fitted with Tickford bodies. He soon moved Aston Martin onto the site at Tickford Street where it remained until Ford moved DB7 production to Bloxham and then to Gaydon for the DB9 and DBS.[citation needed]
_-_8856790173.jpg)
In 1981 Aston Martin created an engineering service subsidiary and chose the name 'Aston Martin Tickford'. With the changing fortunes of Aston Martin, the company moved into a purpose-built facility in Milton Keynes under the separate ownership of CH Industrials plc and despite carrying out a lot of unseen, "back-room" engineering projects for major manufacturers, gained most publicity from adding engineering and tuning to its coachbuilder roots allowing it to develop special products like the 140 mph, turbocharged Tickford Capri for Ford. After the Capri, Tickford worked with among others,MG to create theMaestroTurbo andFord to create the road-goingSierraCosworth RS500 and the homologated version of theRS200. These vehicles were made in a factory set up near Coventry and a railway division was set up in Nuneaton to design interiors for underground and mainline train carriages.
The roof of theJaguarXJS cabriolet was also designed by Tickford. These cars were originally converted by Tickford themselves, but it was so successful that Jaguar set up a convertible production line to cope with demand.
During the collapse of the CHI Group in 1990, the directors of Tickford executed a buy-out and saved Tickford from going into receivership, partially funded through the sale of the railway division to Babcock International. Tickford was now back in its roots of engine and vehicle engineering and worked on developing new markets. The company won projects in Detroit and the Far East and set up liaison offices in the US and Germany.
Tickford set up a production line inDaventry to convert theFord Puma into the limited editionFord Puma Racing (just 500 were built) and did most of the engineering design and development of the Ford Focus RS at Milton Keynes, also providing a build facility next to Ford's Saarlouis plant.
After a worldwide search,Ford Australia selected Tickford as a joint-venture partner, resulting inTickford Vehicle Engineering Pty Ltd (TVE) being established in 1991 as the high performance car division of Ford in Australia.[6]
TVE is best known for building theFord Falcon XR6 andXR8 models for Ford. It also engineered a range of higher performance cars, the T-Series[7] with TE50 & TS50 models based on theFord AU Falcon[8] and the TL50 derived from theFord AU Fairlane. TheFTE T-Series models were launched in October 1999 under the FTE name,[9] FTE being an acronym for Ford Tickford Experience.[10] The "T-Series" was produced in very limited numbers with 842 built[11] (including pre-production press vehicles). The third series, known as the T3 was the final resting place for the Ford Windsor V8 engine and the last model from TVE.
In 2001 the whole Tickford Group in UK, Germany, Australia and USA, was acquired byProdrive, the British motor sport company and, in 2002, its Australian joint venture with Ford,Tickford Vehicle Engineering, was rebranded asFord Performance Vehicles. The Tickford name disappeared again.
In December 2006, the management team ofProdrive Test Technology, running the former Tickford site at Milton Keynes, purchased the business from Prodrive, renaming itTickford Powertrain Test. The company now focused on the independent engine and vehicle testing needs of vehicle manufacturers, component companies and the catalyst and petroleum industries. In June 2007, the company acquiredScott Gibbin Ltd, aPeterborough-based engine test and development company. In the spring of 2009 the Peterborough site was closed and the work transferred to the Milton Keynes facility in Tanners Drive.
Intertek Group plc, a provider of Assurance, Testing, Inspection and Certification services to a wide range of industries worldwide, acquired Tickford Powertrain Test on 31 December 2012 from its management shareholders. Traded as Intertek Tickford for 12 months and then latterly just Intertek.[citation needed].
In 2016, through Prodrive, Tickford returned to the Australian automotive market. Offering high performance upgrades to the Ford Mustang, Ranger and Everest.This was as a result of Ford Australia shutting down local production, ending the Falcon model and discontinuing the Ford Performance Vehicles brand.
Tickford built on its engine performance heritage with the development of V8 racing engines forAston Martin. These were raced in Nimrod and EMKA chassis and powered Nimrod to third place in the1983 World Endurance Championship for Makes. Tickford also developedCosworth engines for Ray Mallock Racing and Ecurie Ecosse, with the latter gaining second place in the C2 Class of the1987 World Sports Prototype Championship for Teams.
In the late 1980s Tickford designed, developed and builtFormula One engines, including some with unique 5-valve cylinder heads. A Tickford 5v version of theJudd V8 was commissioned byCamel Team Lotus forNelson Piquet andSatoru Nakajima to use.
