| Mannlicher M1895 | |
|---|---|
Mannlicher M1895 Rifle. From the collections of theSwedish Army Museum. | |
| Type | Straight pullbolt-action rifle |
| Place of origin | Austria-Hungary |
| Service history | |
| In service | 1895–1918 (Austria-Hungary) 1895–1949 (Other nations) |
| Used by | SeeUsers |
| Wars | First Sino-Japanese War Boxer Rebellion Ilinden–Preobrazhenie Uprising First Balkan War Second Balkan War World War I Russian Civil War[1] Austro-Slovene conflict in Carinthia Revolutions and interventions in Hungary Polish-Soviet War Austrian Civil War Second Italo-Ethiopian War Spanish Civil War[2] Sudeten German uprising World War II Greek Civil War[3] 1948 Arab–Israeli War[3] 1958 Lebanon crisis Lebanese Civil War Rhodesian Bush War |
| Production history | |
| Designer | Ferdinand Mannlicher |
| Designed | 1895 |
| Manufacturer | 1896–1918:Œ.W.G. inSteyr 1897–1918:F.G.GY. inBudapest 1918–1920:Zbrojovka Brno |
| Produced | 1896–1920 |
| No. built | approx. 3,500,000[4] |
| Variants | SeeVariants |
| Specifications (M95 Long Rifle) | |
| Mass | Rifle: 3.78 kg (8.3 lb) Carbine: 3.4 kg (7.5 lb) |
| Length | Rifle: 1,272 mm (50.1 in) Carbine: 1,003 mm (39.5 in) |
| Barrel length | Rifle: 765 mm (30.1 in) Carbine: 500 mm (19.7 in) |
| Cartridge | M95:8×50mmR Mannlicher M95/30 & 31.M:8×56mmR M95/24 & M95M:7.92×57mm Mauser |
| Action | Straight-pull bolt action |
| Rate of fire | approx. 20–25 rounds/min |
| Muzzle velocity | M93 (8×50mmR): 620 m/s (2,000 ft/s) M30 (8×56mmR): 720 m/s (2,400 ft/s) |
| Feed system | 5-round internal box magazine, loaded with 5-rounden bloc clips or (stripper clips in M95/24 and M95M variants) |
| Sights | Rear V-notch flip-up sight and front post (telescopic sight on sniper variant) |
TheMannlicher M1895 (German:Infanterie Repetier-Gewehr M.95,Hungarian:Gyalogsági Ismétlő Puska M95; "Infantry Repeating-Rifle M95") is an Austro-Hungarianstraight pullbolt-action rifle, designed byFerdinand Ritter von Mannlicher that used a refined version of his revolutionary straight-pull action bolt, much like theMannlicher M1890 carbine. It was nicknamed theRuck-Zuck-[Gewehr] by Austrian troops (ruck-zuck spoken as "roock-tsoock", in common language meaning "back and forth [rifle]") and "Ta-Pum" by Italian troops who wrote a song(it) about it duringWorld War I. The primary producers were theŒWG in Steyr, andFÉG in Budapest.
Originally they were chambered for the round nosed8×50mmR cartridge, but almost all of the rifles were rechambered to accept the more powerful and longer range spitzer8×56mmR cartridge in the 1930s.
The M1895 is unusual in employing a straight-pull bolt action, as opposed to the more common rotating bolt-handle of other rifles. It combines a two lug rotating bolt head, similar in construction to that found on aMauser rifle with a pair of helical grooves cut in the bolt body to turn the back and forth movement of the bolt handle and body into the rotational movement of the bolt head. The extractor performs both the usual function, and also has a tail attached which interfaces with slots on the cam surfaces of the bolt head to prevent the bolt head from rotating as a result of the striker's spring pressure once it has been unlocked.[5]
The angle of the cam surfaces in the bolt and bolt body is different from the angle at which the locking recesses are cut in the receiver of the rifle, the result is that the first 20 mm (0.79 in) of travel of the bolt body results in the rotation of the bolt head, but with only about 3 mm (0.12 in) of rearward movement, this gives a mechanical advantage to the system and accomplishesprimary extraction of the spent casing from the chamber.
The result of this is that the user can pull the bolt back and forth in two movements rather than the up-back-forward-down of conventional turn bolt rifles. It is consequently renowned for combining relatively highrate of fire (around 20–25 rounds per minute) with reliability and sturdiness, although this requires decent care and maintenance. During Austro-Hungarian trials in 1892, rifles survived torture testing of firing 50,000 rounds without any form of lubrication.[6]
The rifle is loaded by means of a five-rounden-bloc clip, which when loaded with cartridges, is pressed into the magazine of the rifle, where it is retained and acts as the feed lips of the magazine. When the last of the five rounds has been chambered, there is no longer anything retaining the clip in the magazine and it falls out a port in the bottom due to gravity.[1] There is a button in the front of the trigger guard which allows the user to eject a partially or fully loaded en-bloc clip from the magazine when the bolt is open to unload the weapon. The clip will be ejected from the weapon quite energetically as the full force of the follower spring will be pressing against it.
The rifle is not designed to be loaded by any other means but with an en-bloc clip. Attempts to individual feed cartridges into the rifle in absence of proper en-bloc clips may cause damage to the extractor as it is not designed with enough travel to overcome the large rims of the8x50mmR and8x56mmR cartridges used in the M1895 unless they are fed under the extractor from the en-bloc clip.

The M1895 was initially adopted and employed by theAustro-Hungarian Army throughoutWorld War I, and retained post-war by both theAustrian andHungarian armies. The main foreign user wasBulgaria, which, starting in 1903, acquired large numbers and continued using them throughoutboth Balkan and World Wars. After Austria-Hungary's defeat in World War I, many were given to other Balkan states aswar reparations. A number of these rifles also saw use inWorld War II, particularly by second line, reservist, and partisan units in Romania, Yugoslavia, Italy, and to a lesser degree, Germany. Post-war many were sold as cheap surplus, with some finding their way to the hands of Africanguerrillas in the 1970s[citation needed] and many more being exported to the United States as sporting and collectible firearms.The M1895 bolt also served as an almost exact template for the ill-fated Canadian M1905Ross rifle, though the later M1910 used a complicatedinterrupted-thread instead of two solidlugs.
The M1895 was originally chambered in the 8mm M.1893 scharfe Patrone (8×50mmR Mannlicher) cartridge. Between the world wars, both Austria and Hungary converted the majority of their rifles to fire the more powerful8×56mmR round.
Yugoslavia[7] converted at least some of their captured M1895s to7.92×57mm Mauser, fed bystripper clips instead of the original model'sen bloc clip system. This conversion was designated M95/24 and M95M. The M95/24 is often mistakenly attributed to Bulgaria, but8×57mm IS was never a standard cartridge of the Bulgarian military.[8] These conversions are prized by collectors for their relative scarcity and chambering in a commonly available round, but suffer from a fragileextractor and a lack of replacement parts.
For the post World War I conversions seeConversions.
The "Infantry Repeating-Rifle M1895" (German:Infanterie Repetier-Gewehr M1895) was the basic variant. It was chambered for the8×50mmR Mannlicher cartridge. Its iron sights were graduated 300–2600paces (225–1950 m). It was used duringWorld War I by the majority of theAustro-Hungarian Army troops.
This stutzen or short rifle (official designation German:Repetier-Stutzen M1895; "Repeating-Stutzen M1895") was mainly used by special troops (i.e.storm troops) during World War I. It chambered the8×50mmR Mannlicher cartridge. Its sights were graduated 500–2400paces (375–1800 m).
Weight: 3.09 kilograms (6.8 lb)
Length: 1,003 millimetres (39.5 in)
Barrel length: 500 millimetres (20 in)
The carbine (official designation German:Kavalerie Repetier-Carabiner M1895; "Cavalry Repeating-Carbine M1895") was chambered8×50mmR Mannlicher and used bycavalry units of theAustro-Hungarian Army as a replacement of theMannlicher M1890 carbine. The sights were graduated 500–2400paces (375–1800 m). Although it originally didn't havebayonet lugs, during World War I it was fitted with stutzen-like front barrel band with bayonet lugs after mounted cavalry units were found ineffective.
Weight: 3.4 kilograms (7.5 lb)
Length: 990 millimetres (39 in)
Barrel length: 480 millimetres (19 in)

The main difference from the standard rifle and sniper was the telescopic sight mount. The scope was mounted slightly to the left so the rifle could be fed by theen-bloc clip. Approximately 6,000 long and short barreled sniper rifles were made in the years 1915–1918.[9]
TheM95/30 was a conversion in theFirst Austrian Republic bySteyr-Mannlicher during 1930–1940. These rifles carry the letterS meaningSpitzer stamped on the barrel. Main modification was the rechambering to8×56mmR cartridge. Other changes were the conversion of ladder sights from the olderpace unit to meters and addition of a brass front sight protector. Many long rifles were cut down to Stutzen length. Most of M95/30s were sent to Bulgaria during 1938–40, where front sight protectors were removed.[10]
The31.M or M95/31 was a conversion done in theKingdom of Hungary. Rifles were converted 1931–1935 byFÉG inBudapest and carry the letterH meaning Hegyes Töltény (pointed bullet) stamped on top of the chamber. The conversion included rechambering to the new8×56mmR pointed bullet cartridge, new metric ladder sights and the addition of a front-sight protector. Long rifles were cut down to carbine length and designated 31/a.M. A small number were rechambered but were not cut down for the Hungarian Governmental Guards; these had special long bayonets.[11]
TheM95M orM95/24 was a conversion to7.92×57mm cartridge by theKragujevac Arsenal in theKingdom of Yugoslavia. These rifles feature YugoslavianM24 Mauser barrels, sights, similar handguards and are fed by five-round stripper clips. Their extractors are prone to breakage when being fired single-shot. Some of these rifles were found in theKingdom of Greece by the German forces during World War II and were mistakenly attributed Greek origin.[12][13]

After 1938, Hungarian soldiers in rifle companies were reequipped with the new35M rifle, but the most of troopers (machine gunners, supply troops, pioneers, gunners, messengers etc.) were still equipped with Mannlichers. In mid-1940 theRoyal Hungarian Defense Forces ('Magyar Királyi Honvédség', the name of the army at the time) had 565 thousand rifles. Of this, 105 thousand were new35M, 100 thousand1895 mauser rifles (used in second line units) and the rest were Mannlicher, by variants:
During 1941, 30 thousands of 95M rifles were converted to the 31.AM standard (note: name changed to AM from a.M.). After 1941 only 35M (and its Mauser-chambered version) were produced, so the number of Mannlichers decreased continuously. In addition to the losses, the significant wear and tear of the already quite old weapons also played a big role in this. Mannlichers remained the almost exclusive type of rifle in some formations, e.g. pioneer and artillery units used 31.Ms until the end of the war. This led to numerous issues during the battles of 1945, as weapon jams were highly prevalent. Most of these problems arose from the rapid and repeated firing, which caused already worn-out weapons to jam due to thermal expansion. If a soldier attempted to forcefully open the lock, it could potentially crack. After 1945, a few pieces were still used by the re-established military, border guard and police units, but they quickly wore out. Moreover, the majority of rifles belonging to civilians (hunters, guards) were confiscated by the communists. So, interestingly, more 31M rifles remained intact in the surrounding countries than in Hungary.[14]
Source:[15]
| Cartridge | Length | Weight | Sling Swivels | Bayonet Lug | Notes | |
|---|---|---|---|---|---|---|
| Rifle Model 1895 | 8×50mmR | 128.2 cm (50.5 in) | 3.63 kg (8.0 lb) | Under | Yes | |
| Carbine Model 1895 | 8×50mmR | 100 cm (39 in) | 2.95 kg (6.5 lb) | Side | No | 7 in (18 cm) gap between front and rear barrel bands |
| Stutzen Model 1895 | 8×50mmR | 100 cm (39 in) | 3.13 kg (6.9 lb) | Under | Yes | 5 in (13 cm) gap between front and rear barrel bands |
| Carbine Model 1895 with Stutzen lug | 8×50mmR | 100 cm (39 in) | 3.18 kg (7.0 lb) | Side | Yes | 7 in (18 cm) gap between front and rear barrel bands |
| Carbine-Stutzen Model 1895 | 8×50mmR | 100 cm (39 in) | 3.22 kg (7.1 lb) | Either | Yes | 5 in (13 cm) gap between front and rear barrel bands |
| Stutzen-Carbine Model 1895 | 8×50mmR | 100 cm (39 in) | 3.27 kg (7.2 lb) | Both | Yes | 7 in (18 cm) gap between front and rear barrel bands |
| Rifle Model 1895/30 | 8×56mmR | 128.2 cm (50.5 in) | 3.63 kg (8.0 lb) | Under | Yes | |
| Stutzen Model 1895/30 | 8×56mmR | 100 cm (39 in) | 3.22 kg (7.1 lb) | Either | Yes | |
| Stutzen Model 1895/30 from Long Rifle | 8×56mmR | 100 cm (39 in) | 3.22 kg (7.1 lb) | Either | Yes | Long rifle rear sight |
| Rifle M95M and M95/24 | 7.92×57mm | 110 cm (43 in) | 3.86 kg (8.5 lb) | Both | Yes |
There were two main variants of thebayonet; the first was the standard bayonet, the second was theNCO variant that featured a hookedquillion and a golden lanyard. The overall length was 360 millimetres (14 in) and the blade was 248 millimetres (9.8 in) long. The bayonet was unusual in that the edge faced upwards when mounted on the rifle. The majority of them were made byŒ.W.G. andF.G.GY. Bayonets were originally not serial numbered.
Late inWorld War I resources were limited and they started manufacturingreplacement (German:Ersatz) bayonets. These were fast to produce, cheap and made completely out of metal.[16]
A number of Model 1916 night (Luminous) sights were issued during World War I.[17] The rear night sight is a small brass plate that is placed underneath the rear sight leaf. The front sight clamps around the rifle's front sight base.[18]
ADrahtzerstörer or "wire destroyer" device for Mannlicher type firearms was also sometimes issued with the rifle during World War I. During assaults, when soldiers would run into barbed wire obstacles, the "wire destroyer" would grab one of the wires and the soldier would shoot through it. It could only be used with a mounted bayonet.
Various other improvised wire destroyers existed, some originally designed for theMosin–Nagant rifle that were captured on theEastern front were easily modified to fit the M95. Some were also crafted by military blacksmiths.[19]
