| Sky Scrapper | |
|---|---|
 The lift hill and zero-g roll ofSky Scrapper | |
| World Joyland | |
| Location | World Joyland |
| Park section | Universe of Starship |
| Coordinates | 31°29′51″N120°02′28″E / 31.4975°N 120.0411°E /31.4975; 120.0411 |
| Status | Operating |
| Opening date | April 30, 2011 (2011-04-30) |
| General statistics | |
| Type | Steel –Flying |
| Manufacturer | Bolliger & Mabillard |
| Model | Flying Coaster – Custom |
| Lift/launch system | Chain lift hill |
| Height | 131.3 ft (40.0 m) |
| Drop | 104.3 ft (31.8 m) |
| Length | 2,805.1 ft (855.0 m) |
| Speed | 54.7 mph (88.0 km/h) |
| Inversions | 5 |
| Duration | 2:06 |
| G-force | 3.3 |
| Height restriction | 140 cm (4 ft 7 in) |
| Trains | 2 trains with 7 cars. Riders are arranged 4 across in a single row for a total of 28 riders per train. |
| Sky Scrapper at RCDB | |
Sky Scrapper (also known asStarry Sky Ripper) is aflying roller coaster atWorld Joyland inWujin,Changzhou,Jiangsu, China. Sky Scrapper was one of World Joyland's opening day attractions, officially opening on April 30, 2011. The 2,805.1-foot-long (855.0 m) ride stands 131.3 feet (40.0 m) tall, and features a top speed of 54.7 mph (88.0 km/h). Designed by Swiss firmBolliger & Mabillard, Sky Scrapper restrains riders in theprone position and features fiveinversions.
World Joyland officially opened to the public on April 4, 2011.[1][2] The park opened with the custom-designed Sky Scrapper, a Flying Coaster model from Bolliger & Mabillard.[1] The ride is located in the Universe of Starship area of the park.[3] The park is derived from theWorld of Warcraft andStarCraft franchises.[4][2]
The roller coaster's steel track is approximately 2,805 feet (855 m) in length and the height of the lift is 131.3 feet (40.0 m). Sky Scrapper operates with two steel and fiberglasstrains. Each train has seven cars that seat four riders in a single row, for a total of 28 riders per train.[1]
Sky Scrapper features a total of five inversions, which ties it withThe Flying Dinosaur for the most inversions on a B&M Flying Coaster model.[5] These include azero-g roll, avertical loop, a "Lie to Fly"/"Fly to Lie" pair, and twoinline twists.[1][6][7][8] A "Lie to Fly" element is when riders are on their backs, facing the sky and they are flipped and face the ground. A "Fly to Lie" element is the opposite.[9] As of August 2013[update], Sky Scrapper is the only Bolliger & Mabillard Flying Coaster to feature a vertical loop, and is one of only two to feature a zero-g roll.[10][11]
Once in thestation, riders of Sky Scrapper board atrain sitting down, in a similar style toinverted roller coasters.[12] Riders are restrained through a padded over-the-shoulder harness and a lap bar.[13] At the ankles, two flaps hold the legs in position and close as the harness is locked in place. After the train is fully locked and checked, the trains are raised into the flying position and depart the station.[12]
The train travels out of the station and up the 131.3-foot (40.0 m)lift hill. The train then drops, reaching a top speed of 55 mph (89 km/h) before entering anoverbanked turn. This is followed by a zero-g roll and "Fly-to-Lie" element that turns riders from a face-down prone position to a face-up lying position. It then goes through a small tunnel and enters the vertical loop. Riders are then transitioned back to a prone position after entering the following "Lie-to-Fly" element, which travels over water. Riders then experience a double inline twist element, and a helix that turns to the left. The train enters the finalbrake run and follows a short path back to the station.[1][6]
Media related toSky Scrapper at Wikimedia Commons