Sealant is a substance used to block the passage offluids through openings in materials,[1] a type ofmechanical seal. In building constructionsealant is sometimes synonymous withcaulk (especially if acrylic latex or polyurethane based)[2] and also serve the purposes of blocking dust, sound and heat transmission. Sealants may be weak or strong, flexible or rigid, permanent or temporary. Sealants are notadhesives but some have adhesive qualities and are calledadhesive-sealants orstructural sealants.
Sealants were first used in prehistory in the broadest sense as mud, grass and reeds to seal dwellings from the weather[3] such as the daub inwattle and daub andquincha. Natural sealants and adhesive-sealants included pine pitch andbirch pitch,bitumen,wax,tar,natural gum, clay (mud) mortar,lime mortar,lead, blood, and egg. In the 17th century glazingputty was first used to seal window glass made with linseed oil and chalk, later otherdrying oils were also used to make oil-based putties.[4] In the 1920s,polymers such asacrylic polymers,butyl polymers and silicone polymers were first developed and used in sealants. By the 1960s, synthetic-polymer-based sealants were widely available.[5]
Sealants, despite not having great strength, convey a number of properties. They seal top structures to the substrate, and are particularly effective inwaterproofing processes by keeping moisture out (or in) the components in which they are used. They can provide thermal and acoustical insulation, and may serve as fire barriers.[6][7]
Sealants are frequently used in both interior and exterior construction to provide waterproofing and draughtproofing, while also improving the overall aesthetic finish of a building. Silicone sealants are commonly applied around skirting boards, window glazing, doorframes, and woodwork, owing to their flexibility, to create a neat appearance as well as a durable seal. In addition to standard formulations, manufacturers such as AB Building Products and Soudal offer ranges of coloured silicone sealants designed to meet both practical and aesthetic requirements.[8]
They may have electrical properties, as well. Sealants can also be used for simple smoothing or filling. They are often called upon to perform several of these functions at once.
A caulking sealant has three basic functions: It fills a gap between two or more substrates; it forms a barrier due to the physical properties of the sealant itself and by adhesion to the substrate; and it maintains sealing properties for the expected lifetime, service conditions, and environments. The sealant performs these functions by way of correct formulation to achieve specific application and performance properties. Other than adhesives, however, there are few functional alternatives to the sealing process.[citation needed]
Soldering orwelding can perhaps be used as alternatives in certain instances, depending on the substrates and the relative movement that the substrates will see in service. However, the simplicity and reliability offered by organic elastomers usually make them the clear choice for performing these functions.
A sealant may be viscous with little or no flow characteristics and which stays where it is applied, or it may be thin and runny to penetrate the substrate bycapillary action.
Anaerobic acrylic sealants (generally referred to as impregnants) are required to cure in the absence of air.[9] Surface sealants require air as part of the cure mechanism that changes state to become solid, once applied, and are used to prevent the penetration of air, gas, noise, dust, fire, smoke, or liquid.
Sealants can be categorized in accordance with varying criteria, e. g. in accordance with the reactivity of the product in the ready-to-use condition or on the basis of its mechanical behavior after installation.[10] A typical classification system for most commonly used sealants is shown below.
Types of sealants fall between the higher-strength, adhesive-derived sealers andcoatings at one end, and extremely low-strength putties, waxes, and caulks at the other. Putties and caulks serve only one function – i.e., to take up space and fill voids. Sealants may be based onsilicone.
Other common types of sealants:
The main difference betweenadhesives and sealants is that sealants typically have lower strength and higher elongation than adhesives do. When sealants are used between substrates having different thermal coefficients of expansion or differing elongation under stress, they need to have adequate flexibility and elongation. Sealants generally contain inert filler material and are usually formulated with anelastomer to give the required flexibility and elongation. They usually have a paste consistency to allow filling of gaps between substrates. Low shrinkage after application is often required. Sealants also typically require a sufficient compression set, especially when the sealant is a foamgasket. Many adhesive technologies can be formulated into sealants.[citation needed]
