Firearm component that houses the operating parts of the weapon
A disassembledGewehr 98 action showing a partially disassembled receiver and bolt
Infirearms terminology and law, thefirearm frame orreceiver is the part of afirearm which integrates other components by providinghousing for internalaction components such as thehammer,bolt orbreechblock,firing pin andextractor, and hasthreaded interfaces for externally attaching ("receiving") components such as thebarrel,stock,trigger mechanism andiron/optical sights.[1] Some firearm designs, such as theAR-15 platform, feature receivers that have 2 separate sub-assemblies called theupper receiver which houses the barrel/trunnion, bolt components etc and thelower receiver (trigger mechanism housing in some cases) that holds the fire control group, pistol grip, selector, stock etc.[2]
The receiver is often made offorged, machined, or stampedsteel oraluminium. Apart from these traditional materials, modern techniques have introducedpolymer andsintered metal powder receivers to the market.[3]
AR-15 rifles showing their configurations with different upper receivers. The lower receiver is visible at the bottom
For the purposes ofUnited States law, the receiver or frame is legally the firearm,[4] and as such it is the controlled part. The definition of which assembly is the legal receiver varies from firearm to firearm, under US law. Generally, the law requires licensed manufacturers and importers to mark the designated receiver with aserial number, the manufacturer or importer, the model and caliber. Makers of receivers are restricted byInternational Traffic in Arms Regulations. Thus, in the case of a firearm that has multiple receiver parts, such as theAR-15, which has an upper and a lower receiver, the legally controlled part is the one that is serialized.[5]
For the AR-15 rifle, the lower receiver assembly is legally considered the actual receiver,[5] although it is functionally achassis that also houses the separatetrigger group. In theFN-FAL rifle, it is the upper assembly that is serialized and legally considered the receiver.[6][7] This has led to prosecutors dropping charges against illegal manufacturing of AR-type firearms to avoid court precedents establishing that neither the upper nor the lower receiver individually contain all the components to be legally classified as a firearm.[8]
"Unfinished receivers", also called "80 percent receivers" or "blanks", are partially completed receivers with no serial numbers. Purchasers must perform their own finishing work in order to make the receiver usable. The finishing of receivers for sale or distribution by unlicensed persons is against US law.[9] Because an unfinished 80% receiver is not a firearm, purchasers do not need to pass a background check.[9] The resulting firearm is known as a "ghost gun".[10]
During theBiden Administration, theATF imposed regulations on the sale and marketing of unfinished receivers and kits containing them by revising the legal definition of receivers to include "a partially complete, disassembled, or nonfunctional frame or receiver, including a frame or receiver parts kit, that is designed to or may readily be completed, assembled, restored, or otherwise converted to function as a frame or receiver". (The term "receiver" was also redefined as referring to non-handgun firearms, while "frame" was redefined as referring to handguns exclusively.) The new definitions went into effect on August 24, 2022.[11] In the caseVanDerStok v. Garland, filed on June 30, 2023, a federal court in Texas ruled that the new ATF regulations exceeded the agency's statutory authority, and struck them down.[12] However, on August 8, 2023, the Texas court's nationwidevacatur was temporarily placed on hold by theSupreme Court of the United States, leaving the new ATF regulations on unfinished receivers in place.[13]
According to the creators, "It requires a bufferless upper to function, such as the ARAK-21 or Rock River Arms PDS Carbine, or a regular upper with a CMMG Style .22 LR Conversion installed."[21]
^"27 CFR 478.11: Meaning of terms".US Government. 2016. Retrieved16 September 2016.Firearm frame or receiver. That part of a firearm which provides housing for the hammer, bolt or breechblock, and firing mechanism, and which is usually threaded at its forward portion to receive the barrel.
^Royal Air Force Common Core and Deployment Skills Aide-Memoire AP 3242B VOL 5, ABBREVIATIONS
^VanDerStok v. Garland (US District Court for the Northern District of Texas 2022-08-11) ("This case presents the question of whether the federal government may lawfully regulate partially manufactured firearm components, related firearm products, and other tools and materials in keeping with the Gun Control Act of 1968. Because the Court concludes that the government cannot regulate those items without violating federal law, the Court holds that the government’s recently enacted Final Rule, Definition of “Frame or Receiver” and Identification of Firearms, 87 Fed. Reg. 24,652 (codified at 27 C.F.R. pts. 447, 478, and 479), is unlawful agency action taken in excess of the ATF’s statutory jurisdiction. On this basis, the Court vacates the Final Rule."), Text.
