 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "RD-0146" – news ·newspapers ·books ·scholar ·JSTOR(June 2022) (Learn how and when to remove this message) |
 Model of RD-0146 | |
| Country of origin | Russia |
|---|---|
| Date | 2001 |
| Designer | KBKhA Design Bureau |
| Manufacturer | TsSKB Progress |
| Application | upper stage |
| AssociatedLV | KVTK |
| Liquid-fuel engine | |
| Propellant | LOX /LH2 |
| Cycle | Expander cycle |
| Configuration | |
| Chamber | 1 |
| Performance | |
| Thrust, vacuum | 68.6 kN (15,400 lbf) |
| Chamberpressure | 5.9 megapascals (860 psi) |
| Specific impulse, vacuum | 470 seconds (4.6 km/s) |
| Dimensions | |
| Length | 3.558 metres (11.67 ft) |
| Diameter | 1.95 metres (6 ft 5 in) |
TheRD-0146 (Russian:Ракетный Двигатель-0146,romanized: Raketnyy Dvigatel-0146,lit. 'Rocket Engine 0146') is aliquid-fuelcryogenic rocket engine developed byKBKhA Kosberg inVoronezh, Russia.
The RD-0146 is the first Russian rocket engine to burnliquid oxygen andliquid hydrogen in the expander cycle, in whichturbopumps are driven by waste heat absorbed in the nozzle and combustion chamber. The RD-0146 featured the fastest-spinning turbopump of any serially produced rocket engine: the fuel turbopump spun at over 120,000 rpm. The RD-0146M variant usesliquified natural gas as a fuel instead of hydrogen, while the RD-0146D variant is projected to produce specific impulse (Isp) as high as 470 seconds (4.6 km/s) in a vacuum.
The engine has been proposed for use on multiplecarrier rockets throughout its history. RD-0146 variants were, at various times, selected to power new upper stages forProton,Angara, Onega (a development ofSoyuz-2), andRus-M. As of 2022, the RD-0146D is in development for use on theKVTK upper stage.
In 1988,RSC Energia directedKBKhA to begin work on a new preburner-less LOx/LH2 rocket engine for use on upper stages, the RO-95. Though this 10 tf (98 kN) engine never left the design phase, its development confirmed the reliability and performance of the expander cycle to KBKhA.[1]
In 1999, a new expander-cycle engine project began. In that year,GKNPTs Khrunichev awarded a contract to KBKhA to develop a new engine, the RD-0146U, for use on its Proton and Angara launch vehicles. The engine was to be of around 10 tf (98 kN) thrust class. Soon after, on 7 April 2000, the American companyPratt & Whitney Rocketdyne entered an agreement with KBKhA, financing the development of the RD-0146. Pratt & Whitney would gain exclusive international marketing rights to this variant.[2] In 2002, RSC Energia awarded KBKhA with a contract to develop the RD-0146E variant for use on its Onega launch vehicle, a Soyuz-2 variant with a fully cryogenic upper stage.[1] In 2008, KBKhA began development of the RD-0146D variant for use on the KVTK upper stage for Angara A5.[3] In 2009,TsSKB Progress selected the RD-0146 for use on the newRus-M launch vehicle's second stage.[4]
The first RD-0146 engine was planned to be delivered to Pratt & Whitney in May 2001. Delays attributed to subcontractor production troubles postponed this, and the first live firing of a production engine took place on 9 October, 2001. A second engine was built and fired in December 2002, and was subsequently delivered to Pratt & Whitney in March 2003.
The RD-0146 used a different testing methodology than previous Soviet and Russian engine trial programs. Individual components and subsystems would be tested separately, while earlier testing would use an all-up method, in which an entire engine was assembled and tested. This meant that a single component failure would make it necessary to disassemble the system to detect flaws.[5]
In order to facilitate test firings of the RD-0146, a new liquid hydrogen production plant was constructed, with a capacity of 100 kg (220 lb) per day.[6] This became the second such facility in Russia.
The RD-0146 is the first Russian rocket engine not to feature apreburner. It is also the first to have anozzle extension without an active cooling system, as well as the first engine by KBKhA to feature separate fuel and oxidiser turbopumps.[7] The engine is capable of five firings and thrust control in two planes. According to the developer, the lack of a gas generator system ensures higher reliability of the engine for multiple firings, by removing the potential of an ignition failure in the engine power cycle.[citation needed]
LM10-MIRA is aliquid oxygen-liquid methane demonstrator engine developed byAvio andKBKhA on the basis of the RD-0146. Development began under the terms of an agreement signed between theItalian andRussian governments inMoscow on November 28, 2000. The 7.5 tonnes-force engine was successfully tested in June 2014 inVoronezh,Russia.[8] After the end of the collaboration with KHBhA, Avio continued the development of theM10 engine for theVega-E program with a target thrust of 10 tonnes-force.[9] As of March 2021[update], the engine ground qualification is foreseen for 2024.[9]
{{citation}}: CS1 maint: work parameter with ISBN (link){{citation}}: CS1 maint: work parameter with ISBN (link)| Liquid fuel |
|  | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Solid fuel |
| |||||||||||||||||
| ||||||||||||||||||