Pressure-sensitive tape orpressure-sensitive adhesive tape (PSA tape) is anadhesive tape that sticks when pressure is applied without the need for a solvent (such as water) or heat for activation. It is also known in various countries asself-stick tape,sticky tape, or justadhesive tape andtape, as well asgenericized trademarks, such asSellotape,Durex (tape),Scotch tape, etc.
release liner, which keeps the tape from sticking to itself. Some have layers of adhesives, primers,release agents,[1] filaments, printing, etc. made for specific functions.
It sticks without the need for a solvent such as water or heat for activation. By contrast, "gummed" or"water activated" adhesive tapes require warm water for activation and "heat activated" tapes require heat.
Single-sided tapes allow bonding to a surface or joining of two adjacent or overlapping materials.Double-sided tape (adhesive on both sides) allows joining of two items back-to-back.
Adhesive transfer tape does not have a backing material. Instead, adhesive is on a double-coatedrelease liner for winding on a roll. Sometimes the adhesive is sandwiched between two liners.
Archival tape is similar to transparent office tape, with low-acid adhesives that will not degrade surfaces they are applied to, protecting documents from damage during long-term storage.
Box-sealing tape (also "packing tape"; "parcel tape", UK) is a type of packaging tape which is clear or opaque, and used for closing packages for shipment. It is usually two inches (48 mm) or three inches (72 mm) wide and is made of apolypropylene orpolyester backing.
Drafting tape is similar to masking tape, but with lower tack adhesive so that it may be removed without damaging or leaving residue on paper or other delicate surfaces, and also haspH maintained at 7 so as not to damage the substrate.
Duct tape usually has a plastic-coated fabric backing and a strong adhesive.
Double-sided tape has adhesive on both sides of a backing material, for attaching two surfaces together.
Electrical tape (or insulating tape) stretches to conform to irregular objects, and is made of materials likevinyl that do not conduct electricity.
Filament tape or "strapping tape" has filaments (usuallyfiberglass) embedded into the adhesive for extra strength.
Masking tape is used to cover areas that should not be painted. It usually has a paper backing and an adhesive designed to be removed from surfaces (within a limited time).
Security tape has special features to make it tamper evident
Speed tape or "600 mile per hour tape" is a metallic foil with an adhesive designed to secure the tape under high-speed airflow and is used on the skins of airplanes
Spike tape is a thinner version of gaffer tape that is usually brightly colored. It is used to mark places of furniture or actors on a stage.
Transparent office tape is used for repairing torn paper products, sealing envelopes, general holding, etc. It is a transparent film ofcellophane, cellulose,polypropylene, or other plastic, with an acrylic orsynthetic rubber–based adhesive. Clear tape with a matte finish is branded "Scotch Magic Tape" or called "invisible tape". Clear tape is sold in pre-filled single-usetape dispensers and in "refill" rolls for permanent desktop tape dispensers. Famous brands includeSellotape,Scotch Tape, Duck, Tesa, LePage's, Texcel, etc.
The PSA industry is in the process of unifying the several standards presently in use.The most active organizations are:
ISOInternational Organization for Standardization: A EuropeanAFNOR committee is currently active in the definition of international standards; some of the most common test methods, such as Peel Adhesion, Static Shear Adhesion, Break Strength, and Elongation are presently ISO standard
ASTM: ASTM International has several Technical Committees which write standards related to pressure-sensitive tape.
PSTC: Pressure Sensitive Tape Council (tapes, North America)
TLMI: Tag & Label Manufacturers Institute (labels, North America)
AFERA: European Association for the Self Adhesive Tape Industry (tapes, Europe)
FINAT: Féderation internationale des fabricants et transformateurs d'adhésifs et thermocollants (labels, Europe)
JATMA: Japanese Adhesive Tapes Manufacturers Association
ASTM International has dozens ofstandards related to pressure-sensitive tape. Some of them are for general types of PSA tape; others are for specific types. For example, ASTM D1000 has test methods for electrical tapes. There are ASTMspecifications for many tapes including D2301 for vinyl electrical tape, D5486 for box-sealing tape, etc. Several of the ASTMtest methods are coordinated with PSTC, other trade associations, and other international organizations.
Following are a few examples of some ASTM standards and counterparts:
ASTM designation
ISO designation
PSTC method
AFERA method
D3121 Standard test method for tack of pressure-sensitive adhesives by rolling ball
PSTC-6
D3330 Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
EN 1939
PSTC-101
AFERA 5001
D3654 Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
EN 1943
PSTC-107
AFERA 5012
D3759 Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tapes
EN 14410
PSTC-131
AFERA 5004
D3811 Standard test method for unwind force of pressure-sensitive tapes
PSTC-8
D5750 Standard Guide for Width and Length of Pressure-Sensitive Tape
Life cycle assessments of the tape and the item being taped are useful to identify and improve possible environmental effects. For example, there may be instances where the use of a PSA tape, compared to an alternative solution, improves the overall environmental impact, or vice versa.[2]
Reuse or recycling are sometimes aided by a tape being removable from a surface. If a tape remains on an item during recycling, a tape should be chosen which does not hinder the recyclability of the item. For example, when tapedcorrugated boxes are recycled, film-backed box-sealing tapes do not hinder box recycling; the adhesive stays with the backing and is easily removed.[3][4]
Archives used PSAs to repair tear and losses of paper since around the late 1920s. This is a problem for conservation. Some applications obscure the content under it. In addition, they cause physical and chemical damage. The tape and the paper react differently to the environment, which lead to distortions. Adhesives gradually yellow, penetrate the paper, and harden. Furthermore, some adhesives dissolves ink and cause bleeding. Treatments may involve physical tools, chemicals, and temperature, depending on the material.[5]
Pressure-sensitive adhesives were first developed in 1845 by Dr. Horace Day, a surgeon.[6] Commercial tapes were introduced in the early twentieth century. Hundreds of patents have since been published on a wide variety of formulations and constructions.
^Gruenewald, L. E.; Sheehan, R. L. (1997). "Consider box closures when considering recycling".J. Applied Manufacturing Systems.9 (1). St Thomas Technology Press:27–29.ISSN0899-0956.
^Journal of the American Institute for Conservation, by Merrily A. Smith, Norvell M. M. Jones, II, Susan L. Page and Marian Peck Dirda; JAIC 1984, Volume 23, Number 2, Article 3 (pp. 101–113)
