Apost hole clam-shell digger, also calledpost hole pincer or simplypost hole digger, is a tool used to dig holes in the ground, typically from a few inches to a about a foot in diameter, for general purposes such as settingfence andsign posts, or plantingsaplings.
The tools consists of two articulatedshovel-like blades, forming an incomplete hollow cylinder about a foot long and a few inches wide, with two long handles that can put the blades in an "open" (parallel) position or a "closed" (convergent) position.
In operation, the tool is jabbed into the ground with the blades in the open position. The handles are then operated to close the blades, thus grabbing the portion ofsoil between them. The tool is then pulled out and the soil is deposited by the side of the hole. The process is repeated until the cavity is deep and wide enough. Sometimes dry or sandier soils will not stay secured in the clams, so water is added to make the soil adhere, or an alternative tool is used instead.
Anearth auger is another tool that is used to dig holes in the ground, consisting of a rotating shaft with one or more blades attached at the lower end. A hand-powered auger is generally easier to use than a clam-shell digger, and can in principle dig deeper and remove more dry, sandy soils. It naturally creates a round and straight hole, but only of a fixed diameter. The shovel like shape of a clam-shell-type digger allows it to be used to dig holes of any shape and any diameter greater than that of the open blades.
Clam-shell-type pole diggers seem to be a relatively recent invention, newer than earth augers. A patent was filed by J. Lawry of Lenoir City, Tennessee in 1908.[1] The patent has the traditional clam-shell design with an extra spike in the center.[citation needed]
Media related toPost hole diggers at Wikimedia Commons
 | This tool article is astub. You can help Wikipedia byexpanding it. |