 | |
| Company type | Private |
|---|---|
| Industry | Bicycle industry |
| Founded | 1953; 72 years ago (1953),Treviso |
| Founder | Giovanni Pinarello |
| Headquarters | , Italy |
Area served | Worldwide |
| Products | Bicycles,E-bike and related components |
| Website | pinarello.com |
Cicli Pinarello S.p.A. is an Italianbicycle manufacturer based inTreviso, Italy. Founded in 1953, it supplies mostly handmade bicycles for theroad,track, E-bikes(NYTRO), mountain bikes andcyclo-cross. They also produce an in-house component brand – MOST.
Giovanni Pinarello [it] was born in Catena di Villorba, Italy in 1922. He was the eighth of 12 brothers. At the age of 15, Giovanni began making bicycles at the factory of Paglianti. After a successful amateur career he turned professional in 1947, aged 25.[1][2][3][4] Pinarello died on 4 September 2014.[5]
In December 2016, Pinarello sold a majority stake for a reported €90-million (US$134-million)[6] in equity value to investment management firmL Catterton[7] with Alantra acting as their advisor. In June 2023, L Catteron sold their stake for an estimated US$175-million toIvan Glasenberg, the Swiss-South African billionaire and former chief executive officer ofGlencore, withHoulihan Lokey acting as the advisor for the seller.[8]
Originally, all Pinarello frames were steel. Pinarello usedColumbus tubing for most of the 1980s but with tubing by Oria in the lower models in 1989. The first non-Italian tube wasTange Prestige for the US-based Levis Cycling team headed by Michael Fatka and ridden byAndrew Hampsten, Steve Tilford, Roy Knickmann, Thurlow Rogers in the mid-1980s.[9] As noted above, the Banesto Line introduced in 1993 exclusively utilized Oria tubing: Oria Cromovan, Oria ML34, and Oria ML25. Throughout the 1990s until 2004, Pinarello produced frames from conventional steel tubing using lugs, oversize tubing, oversize aluminium withTIG welded joints, magnesium and frames of carbon fiber and other materials.
ThePinarello Montello SLX was a landmark model for Pinarello as this was the frame with which Pinarello achieved their first major pro victories. This model frame was one of the most responsive of the mid to late 1980s as shown by wins in events such as theVuelta a España, theGiro d'Italia and stages of theTour de France.[10] The Montello had a brake cable through the top tube, chrome slopingfront fork and chrome on the drive side chain stay; later models had the full rear triangle chromed. The Montello SLX was in red, blue and Spumoni.[11] Pinarellos from the mid-1980s often have the decals restored by owners as factory-applied decals were prone to flaking off.[12]The Montello was available in 2 versions: frame from Columbus SL with SLX fork, or fabricated fromColumbus full SLX double butted tubing with rifling down the inside center. Thebottom bracket was investment cast with the Pinarello logo and thedropouts were byCampagnolo. Braze-ons for down-tubeshifters,front derailleur and two water bottles were provided. The GPT logo (for Giovanni Pinarello, Treviso) appeared in many locations.
ThePinarello Treviso was the second-in-line model under the Montello SLX in the mid-to-late '80's. Built with Columbus SL tubing, it featured a painted fork and seat stays, with chromed chain stays. This model also featured the sloping fork crown. On the road it is easily distinguished from the Montello by the single chrome chain stay. However, some older models of the Treviso (1981) did not have the chrome chain stay.
After the Montello SLX, Pinarello departed from his standard production design with parallel seat and head tube angles and created theGavia. This provided more saddle setback than the Montello or other Pinarello designs.Greg LeMond, the winner of the Tour de France in 1986, 1989 and 1990,[13] promoted designs that pushed the saddle further back.[14] The Gavia was constructed of Columbus TSX tubing. This model was available in red, blue with pearl white panels and pearl white with fluorescent splatter.[11]
TheBanesto Line was released in 1993 following Miguel Indurain's first two Tour de France (1991 and 1992) and first Giro d'Italia (1992) wins. Based upon Indurain's preference, all Banesto Line frames were constructed with Oria tubing. The Banesto Line was headlined by Indurain's Time Trial bike, debuting at the 1992 Giro with a remarkable advance in steel frames as it featured Tig welded custom aerodynamic tubing and custom aerodynamic seat post with internal shifter and brake cable routing. This TT bike represented an early example, possibly the first, of experimentation with airfoil tubing in the pro peloton. Only three of these TT framesets are known to have been constructed. Prior to the 1992 Giro, Indurain had ridden a Banesto painted TT bike with a round tubeset.[15] The Banesto Line included the Tig weldedCiclo Cromovan Record 93, theCiclo ML 34 Record 93 with a chromed fork and chrome rear triangle as well as theCiclo ML 25 Veloce 93. The Banesto Line were supplied with Campagnolo components, Mavic rims, Aci Inox spokes, Vittoria tires, ITM handlebars and Indurain's preferred Selle Italia Turbo saddles.[16] Riding his Pinarello Banesto Line bicycles, Indurain was the last cyclist to win the Tour on a steel bicycle.[17] In 1997, the steel Banesto Line had changed from the white frames to utilize standard Pinarello blue and white color schemes along with Banesto badging on the downtube. In 1998, the Banesto Line included the new Paris aluminum frameset and updated Pinarello logo.
ThePinarello Paris in the mid-1990s was a 7005 series aluminium bike with an aluminium fork later replaced by the aria carbon fork. It was upon this frame that Jan Ullrich and Bjarne Riis won the Tour de France. Winner of the 2007 Editor's Choice award for a road racing bicycle fromBicycling Magazine, the Pinarello Paris FP was the premier monocoque, high modulus, unidirectional carbon fiber frame. In 2009, the FP6 replaced the Paris FP and F4:13. The monocoque frame used the same mold as the Paris FP, but with different carbon fiber (30HM3K).Pinarello had been slow to jump aboard the all-carbon juggernaut, preferring to concentrate on its highly regarded magnesium-frame technology, as showcased in the Dogma series of bikes. But the attraction and momentum of carbon was unavoidable, and while the all-carbonF4:13 hadn't displaced the Dogma at the top of Pinarello's line-up, it was clearly a serious and purposeful attempt to use the material's properties to best advantage, starting with one-piece main frame construction to exploit carbon's stiffness and low weight.
ThePinarello FP Uno was the current base model bicycle built by Pinarello evolving from its predecessor, theFP1. The FP Uno featured hydroformed asymmetric 6061 T6 triple butted aluminium tubing. The next superior model was thePinarello FP Due. Like the FP Uno, this had evolved from its predecessor, theFP2. The frame was constructed from 24HM12K carbon fibre. ThePinarello FP Quattro was built from 30HM12K carbon fibre and featured carbon asymmetric stays with an Onda carbon fork. The Quattro also utilised the new iCR internal cable routing system, which had been developed in-house, by Pinarello.
ThePinarello Neor replaced the FP Uno as Pinarellos base road bike model, featuring the same hydroformed aluminum frame as the FP Uno, but now boasted a carbon fibre rear triangle, as well as ONDA carbon fork.[18] ThePinarello FPTEAM Carbon was constructed from 24HM12K uni-directional carbon fibre and featured both a tapered 1 "1/8 1" 1/4 ONDA fork and ONDA rear triangle.[19] ThePinarello Rahza was a full 24HM12K carbon fibre frame, featuring an asymmetrical monocoque design, which improved frame rigidity. The frame also featured an ONDA fork and rear stays as well as the BB30 bottom bracket.[20] ThePinarello Marvel was an entirely new asymmetry frame originating from thePinarello Paris (constructed from Torayca 50HM1.5 carbon fibre) made from 30HM12K carbon. Rigidity of the frame was further improved by the usage of a tapered headset (1" 1/8 - 1" 1/2) as well as featuring internal cable routing. Pinarello said that the Marvel was a"top level bike and already UCI approved for use in official competitions." The Marvel also made full use of the Think2 system, allowing the usage of both electronic and mechanical groupsets. Other new features included the new ONDA2V front fork and a new aerodynamic downtube.[21]
For 2016 Pinarello updated their product line starting with new mid-level bikes up to models just below the Dogma Series. All GAN Series models took styling and design cues from the Dogma F8. The entry levelGAN stemmed directly from the design efforts of the Dogma F8, whilst having a less 'extreme' style which aided riding comfort. TheGAN Disk variant contained the same features as the GAN but also included disk brakes; both models were manufactured from T600 carbon fibre.[22] TheGAN S featured an all-T700 carbon fibre frame, whilst still maintaining design features akin to the F8.[23] The top of the class model was theGAN RS which featured a higher-strength T900 Toray carbon.[24]
.jpg)
ThePinarello Dogma was the company's top-of-the-line model, the first bicycle of a 'new generation' of frames. It was the successor to thePinarello Prince range, released for sale to the public in 2010. The frame had a completely asymmetric design made entirely of 60HM1K carbon fibre, with the right hand side of the Dogma frame different in shape and section to that of the left side, thus providing increased rigidity against forces placed upon the frame by pedalling.[25]
In 2011, the successor to the Dogma, thePinarello Dogma 2 was revealed at the2011 Tour de France. The Dogma 2 featured aerodynamic improvements which increased the efficiency of the frame.[26]Bradley Wiggins rode the Dogma 2 to victory in the2012 Tour de France. In 2012, mountain bike trials rider,Martyn Ashton, created a video in which he performed several tricks and stunts on a Dogma 2. The video, entitled "Road Bike Party", went viral, gaining over half a million views in one day, and it has currently had over fourteen million views on YouTube.
ThePinarello Dogma K featured Pinarello"s 'Century Ride' geometry, using frame design that provided increased comfort without compromising overall performance. As with other modern Pinarellos, the frame incorporated an asymmetrical design which offset the asymmetric forces created by pedalling. The Dogma K and the Dogma frame differed from each other in the angle of the seat tube, brought back to increase shock absorption, and reduced head tube angle, as well as slightly longer chain stays to increase comfort. Furthermore, a longer wheelbase made for a frame that is less rigid vertically, improving shock absorption. ThePinarello ROKH frame was made in an effort to offer the excellent performance of the DOGMA K to a wider group of cyclists. The ROKH's geometry was similar in shape and construction but with an even longer wheel base to add even more vertical compliance than the Dogma K. TheDogma K Hydro mirrored the new model variation seen with the Dogma 65.1, whereby hydraulic disc brakes had now been added. The Hydro featured a new ONDA HD (Hydraulic Disc) fork, as well as new chainstays accommodating the RAD braking system seen on both the DOGMA XC and Dogma 65.1 Hydro.[27]
The 2013 generation of the Dogma bicycle was theDogma 65.1 Think2. When compared to the Dogma2, the Think2 featured stronger and more rigid carbon fibre, 65HM1K, yielding a more reactive frame. Moreover, the Think2 had been built with the new electronic shifting groupsets in mind, and thus had internal cable routing for bothShimano and Campagnolo systems.[28] The 2014Dogma 65.1 Hydro variant of the Dogma was virtually the same as the 2013 Think2 model, made from Torayca 65Ton HM 1K carbon fibre with "Nanoalloy technology". The Hydro however, accommodated hydraulic disc brakes and featured a new front fork developed from the previous ONDA2 fork, called the ONDA HD (Hydraulic Disk). The frame also featured new chainstays which accommodated the newRAD braking system, derived from the development of the Dogma XC.[29]Chris Froome rode the Dogma 65.1 Think2 to victory in the2013 Tour de France.
.jpg)
In May 2014 thePinarello Dogma F8 (8th generation) was revealed as part of the company's 2015 product launch.[30] The new bike was developed in conjunction withTeam Sky sponsor and car manufacturerJaguar and took design cues (such as the front fork shape) from the Bolide time trial bike. Research advancements had led to claimed aerodynamic gains, with the F8 being 26.1% more aerodynamic than the Dogma 65.1, 6.4% more aerodynamic when including the bike rider and the frameset alone being 40% more aerodynamically efficient than the predecessor.[31] The bike was expected to debut at the2014 Critérium du Dauphiné.
In April 2015, just days ahead of theTour of Flanders Pinarello, along withJaguar-Land Rover andIneos Grenadiers, unveiled theDogma K8-S – a replacement for the cobble-focused Dogma K. The most striking aspect of the new bike was the rear suspension system, dubbed the Dogma Suspension System, which could provide up to 10mm of travel; this however, was not the first time road bikes had been fitted with suspension.[32] The bike was designed in conjunction with Jaguar[33] and featured the aerodynamic fork from the Dogma F8, which in conjunction with the suspension system was claimed to reduce vibrations by 50%, with data from Jaguar-Land Rover showing an increase in speed of 8% and a reduction in energy usage of 10%.[34][35] A version of the bike would also be made which did not have the suspension system built in - the Dogma K8.[36] In May 2015, the company launched theDogma F8 Disk in preparation for the UCI's review on the use of disk brakes in road competitions. The bike was essentially the same as the standard F8 in terms of performance and characteristics.[37][38] In December 2015, the company launched a limited edition variant of the F8, theDogma F8w, which used the wirelessSRAM RED eTap groupset.[39][40][41] In 2016, just before the2016 Tour de France the company launched theDogma F8 Xlight.[42]
In January 2017, the company revealed its new flagship bike, theDogma F10. Unlike in previous years, where Pinarello had unveiled their new products to coincide with theGiro d'Italia, the F10 was revealed before the start of the 2017 season. TheIneos Grenadiers team-bikes were equipped withShimano's newest 9150 Dura-Ace Di2 groupset, whilst Pinarello claimed the F10 was 6.3% lighter and 7% stiffer than its predecessor (still composed of Torayca T1100 1K carbon), whilst a 53 cm unpainted frame had a claimed weight of only 820g. The F10 also had a 12.6% claimed aerodynamic advantage over the F8, coming in part from the 'concave' back shaped aerofoils (also found on the second version of the Bolide time trial bike). The F10 also had a number of aerodynamic devices which had been taken from other models, the aforementioned Bolide, as well asBradley Wiggins'hour record bike.[43] Only hours after its release, Taiwanese bike manufacturer - Velocite - claimed that new F10 and the second version of the Bolide infringed on three of its patents.[44] The F10 would also be available to the public immediately. During the2017 Giro d'Italia a number ofTeam Sky riders tested theDogma F10 X-Light - a lightweight version of the F10 - in readiness for the2017 Tour de France. Pinarello claimed an unpainted X-Light weighed in at 760g for a 53 cm-sized frame.[45] In mid-July the company announced theDogma F10 Disc would be produced for sale.[46] A day later the company revealed theDogma K10, taking aerodynamic and visual cues from the F10 forebear[47] and the electronically-controlled suspension variant, theDogma K10S Disk.[48]
In May 2019, the company revealed the successor to the Dogma F10, the Dogma F12 which was launched alongside Team Ineos.
Following the success of Pinarello's first experiment with aero tubing in Indurain's 1992 Banesto Line time trial bike, Pinarello developed the carbon monocoqueEspada with input from Formula 1 expert Giacchi for the 1994 Hour Record attempt. This was Pinarello's first carbon frame.[49] Indurain succeeded in setting a new standard on the Espada by breaking 53 kph for the first time with a mark of 53.040 kph. Indurain gained further success on the Espada in the 1995 Tour, winning both long time trials, before returning to a Banesto Line frame to win the 1996 Olympic time trial.
ThePinarello Montello FP8 was a time trial bicycle manufactured by Pinarello prior to the introduction of the Graal. It was made with aerospace grade carbon fibre composite. The 50HM3K carbon fibre created an ultra-stiff and light ride.ThePinarello Graal was a time trial frame manufactured by Pinarello. The Graal was designed usingCFD techniques, maximizing the efficiency of the bicycle. The frame was available in both an electronic version and mechanical version, with the electronic version featuring an internally-mounted battery.[50]ThePinarello Bolide was released on 2 May 2013[51] with gains of a 15% reduction in aerodynamic drag and 5% reduction in weight over the Graal.Team Sky's2012 Tour de France winnerSir Bradley Wiggins used the new bike at the2013 Giro d'Italia. The Bolide had been in development for over a year with both Pinarello lab technicians and Team Sky working on the bike. The Bolide used aeroplane wing-shaped tubular sections in conjunction with a 'concave back' on the seat tube. This allowed the rear wheel and frame to be closer together. In addition, the brakes were shielded behind leading small fairings and the frame utilized integrated cabling to further minimize drag.[51]
On 21 June 2013 Pinarello released their second (in-house developed)high end time trial frame within two months, called thePinarello Sibilo.[52] The Sibilo would debut at the2013 Tour de France withAlejandro Valverde ofMovistar Team.[52] Early impressions were that the Sibilo shared some common features with the Bolide, such as: airfoil tubing, track-style rear dropouts and a 'concave back'. Moreover, the Sibilo carried some aerodynamic refinements over the Bolide, for example, the front brake was further integrated into the fork and the rear brake had been moved toward the chainstays. These modifications removed the need for the brake fairings which were seen on the Bolide. The Sibilo was constructed from the same Torayca 65HM1K carbon as the Bolide, with internal cable routing for extra aerodynamic benefit. The Sibilo utilized the stiff BB86 bottom bracket and could also accommodate both mechanical groupsets such as theShimano Dura-Ace andCampagnolo Super Record sets, as well as their electronic variants (Dura-Ace Di2 and Campagnolo EPS).[52]ThePinarello Xirion was designed specifically for triathletes by utilizing favorable frame geometry and was made from 24HM Unidirectional carbon fibre. The Xirion was sold as a complete bicycle fitted with Vision cycling components.[53]
.jpg)
In light ofBradley Wiggins' hour record attempt, Pinarello collaborated withJaguar to produce theBolide HR. The HR variant had an aero-optimised front fork, seat stays and dropouts. The bike also featured printed titanium bars.[54] In 2015, the endurance part of theItalian national cycling team received Bolide HR bikes. At the2016 UCI Track Cycling World Championships,Filippo Ganna rode his Bolide HR to victory in the Individual Pursuit.[55]
In May 2016, three years after its initial introduction, thePinarello Bolide TT[56] was released exclusively to Team Sky.[57] The first race-ready model of the bike would be given toMikel Landa for use on the Stage 9 time trial at the2016 Giro d'Italia.[58][59]
In 2018, due to the expansion of off-road gravel racing and riding, Pinarello introduced the Grevil, an aerodynamic gravel racing bike featuring disc brakes, expanded tire clearance, and a wavy, asymmetrical design consistent with the brand's distinctive styling. Cycling publication BikeRadar, in a review, stated that the bike was fast and enjoyable to ride, but the prohibitive price point and firm ride quality made it a better choice for high-level racers than an amateur weekend rider.[60] In 2022, Pinarello released an updated Grevil, the Grevil F, which featured aerodynamic improvements in the form of a flattened downtube and the adoption of the Total Internal Cable routing (TCR) used in its Dogma superbikes. The brand claimed that the updated model was 4% more aerodynamic and saved five more watts at 40 km/h than the older model.[61] Other modifications included geometry alterations to help riders battle fatigue in longer races.
Cyclocross riders have been riding Pinarello bikes since the 1980s, though these were little more than road bikes equipped with knobbier tires. In 2022, the brand unveiled its first dedicated CX bike in 30 years, the Crossista F, in preparation for the 2022UCI CX World Championship. The bike, designed in collaboration with British Ineos Grenadiers rider and CX World ChampionTom Pidcock, was modelled after the brand's aerodynamic road bikes, with slightly improved tire clearance, water drainage holes in the frame, and altered geometry to make for easier handling in off-road courses with mud and sand.[62] Pidcock rode the bike to victory in the 2022 CX World Championship, and as of 2025 the Crossista F was still in production.
Though most well-known for its road bikes, Pinarello has in recent years expanded its range to includemountain bikes. In 2012, mountain bike publications received rumors of an off-road bike from the brand, the Dogma XC. Released in 2013, the XC was, as the name suggests, designed forCross Country (XC) racing. A hardtail with 100mm of front suspension travel and 29-inch wheels, the Dogma was made out of hi-mod 60T Toray 1K woven carbon to strengthen it for the high-impact nature of off-road racing.[63] The bike was received well among the XC community, and stayed in production for six years before being in 2019.
In 2023, Pinarello unveiled an updated Dogma XC, completely redesigned and available in both hardtail and full-suspension models. Designed in collaboration with Ineos XC racersTom Pidcock andPauline Ferrand-Prévot, the Dogma XC Gen 2 and the lower Pinarello XC models were made available to the public in 2024, and both Pidcock and Prévot rode the bike to victory in the2024 Paris Olympics.[64] Pidcock, for whom the bike was tailored to his riding style, raced the bike in the 2023, 2024, and 2025 UCI XC World Championships, claiming the championship title in 2023. In 2025, he switched teams, leaving Ineos for team Q36.5, and rode the bike in accordance to his personal sponsorship from Pinarello despite the team's bike supplier contract withScott Sports.
The Dogma XC was received favorably by the mountain biking community, with many publications praising its responsive handling and unparalleled stiffness under power, while criticizing the high price and distinctive Pinarello styling cues. The FS model of the bike utilized asplit-pivot rear suspension layout with 90 to 100mm of rear wheel travel. The HT model, without rear suspension, had a patented asymmetric chainstay design, which the brand claims helped distribute pedaling power evenly into the rear axle. Both the FS and HT models of the bike were designed for 110mm of front travel.[64] The Ineos Grenadiers XC team had bikes specced with aSR Suntour fork and rear shocks equipped with the TACT electronic suspension control system andShimano XTR drivetrains and brakes, but the production models of the Dogma XC instead usedFox Factory suspension, Shimano XTR brakes andSRAM XX SL Transmission drivetrains. The lower Pinarello XC model used Fox Performance Elite suspension, Shimano Deore XT brakes and SRAM GX Transmission.[64] As of 2025, the bike was still in production.
.jpg)
.jpg)
.jpg)
Pinarello has sponsored professional teams since 1960. Teams includeTeam Telekom,Banesto,Caisse d'Epargne,Del Tongo,Fassa Bortolo,Team Sky (now the INEOS Grenadiers),[4]Movistar Team,British Cycling and British UCI Continental teamVelosure-Giordana Racing Team.
 | This sectiondoes notcite anysources. Please helpimprove this section byadding citations to reliable sources. Unsourced material may be challenged andremoved.(March 2024) (Learn how and when to remove this message) |
 |
Olympic Road Race,Alexi Grewal
OverallTour de France,Pedro Delgado OverallTour de France,Miguel Indurain
OverallGiro d'Italia,Franco Chioccioli
Mountains classificationVuelta a España,Luis Herrera OverallGiro d'Italia,Miguel Indurain
Intergiro ClassificationGiro d'Italia,Miguel Indurain OverallTour de France,Miguel Indurain OverallGiro d'Italia,Miguel Indurain OverallTour de France,Miguel Indurain OverallTour de France,Miguel Indurain OverallTour de France,Miguel Indurain
World Time Trial Championships,Miguel Indurain OverallTour de France,Bjarne Riis Points classification,Erik Zabel
Young rider classification,Jan Ullrich
Olympic Time Trial,Miguel Indurain OverallTour de France,Jan Ullrich Points classification,Erik Zabel Young rider classification,Jan Ullrich
Mountains classificationVuelta a España,José María Jiménez Points classificationTour de France,Erik Zabel Young rider classificationTour de France,Jan Ullrich Mountains classificationVuelta a España,José María JiménezWorld Time Trial Championships,Abraham Olano
OverallVuelta a España,Jan Ullrich Mountains classificationVuelta a España,José María Jiménez Points classificationTour de France,Erik ZabelWorld Time Trial Championships,Jan UllrichOlympic Road Race,Jan Ullrich Points classificationTour de France,Erik Zabel
Points classificationGiro d'Italia,Dimitri Konyshev Points classificationTour de France,Erik Zabel Points classificationVuelta a España,José María Jiménez Mountains classificationVuelta a España,José María JiménezWorld Time Trial Championships,Jan Ullrich Points classificationVuelta a España,Erik Zabel Young rider classificationTour de France,Denis Menchov Points classificationVuelta a España,Erik Zabel Points classificationGiro d'Italia,Alessandro Petacchi Points classificationVuelta a España,Erik Zabel Points classificationVuelta a España,Alessandro Petacchi OverallTour de France,Óscar Pereiro OverallVuelta a España,Alejandro Valverde OverallVuelta a España,Chris Froome OverallTour de France,Bradley Wiggins OverallTour de France,Chris Froome
Mountains classification,Nairo Quintana Young rider classification,Nairo Quintana
World Road Race Championships,Rui CostaWorld Time Trial Championships,Bradley Wiggins OverallTour de France,Chris Froome Mountains classification,Chris FroomeWorld Time Trial Championships,Vasil Kiryienka OverallTour de France,Chris Froome OverallTour de France,Chris Froome OverallVuelta a España,Chris Froome Points classification,Chris Froome Combination classification,Chris Froome OverallGiro d'Italia,Chris Froome Mountains classification,Chris Froome OverallTour de France,Geraint Thomas OverallTour de France,Egan Bernal OverallGiro d'ItaliaTao Geoghegan HartWorld Time Trial Championships,Filippo Ganna
Olympic Road Race,Richard CarapazOlympic Cross-country,Tom PidcockOlympic Team Pursuit,Filippo Ganna OverallGiro d'Italia,Egan BernalWorld Time Trial Championships,Filippo Ganna
45°41′54″N12°15′11″E / 45.6982616°N 12.2529689°E /45.6982616; 12.2529689
