Apayload fairing ornose fairing is anose cone used to protect aspacecraftpayload against the impact ofdynamic pressure andaerodynamic heating during launch through anatmosphere. An additional function on some flights is to maintain thecleanroom environment for precision instruments.[1] Once outside the atmosphere the fairing is jettisoned, exposing the payload toouter space.
The standard payload fairing is typically a cone-cylinder combination, due to aerodynamic considerations, although other specialized fairings are in use. The type of fairing which separates into two halves upon jettisoning is called aclamshell fairing by way of analogy to thebifurcating shell of a clam. In some cases the fairing may enclose both the payload and the upper stage of the rocket, such as onAtlas V[2] andProton M.[3]
If the payload is attached both to thebooster's core structures and to the fairing, the payload may still be affected by the fairing's bending loads, as well as inertia loads due to vibrations caused by gusts andbuffeting.[4]
In the aerospace industry, afrustum is the fairing between two stages of amultistage rocket (such as theSaturn V), which is shaped like atruncated cone (in geometry, a kind offrustum).
Payload fairings have usually been either burned up in the atmosphere or destroyed upon impacting the ocean, butSpaceX began to retrieve them in the 2010s with afairing recovery program. On March 30, 2017, SpaceX successfully retrieved a fairing intact for the first time in history.[5] For a second time on June 25, 2019,SpaceX was able to catch a fairing from the Falcon HeavySTP-2 launch.[6] After this, SpaceX began reusing its fairings, which are manufactured at a cost ofUS$6 million per orbital launch; its CEO,Elon Musk, stated that retrieving the fairings before they touch sea water "makes refurbishment easier".[7]
While a conventional payload fairing is typically jettisoned from the launch vehicle and recovered at sea,Rocket Lab'sNeutron Rocket proposes to use a fairing that is integrated into the vehicle. This attached fairing would open during stage separation to release the second stage and payload and close again after stage separation, then return with the first stage when it lands back on Earth.
In some cases, the fairing is planned to separate after cutoff of the upper stage, and in others, the separation is to occur before a cutoff, but after the vehicle has transcended the densest part of the atmosphere. Failure of the fairing to separate in these cases may cause the craft to fail to reach orbit, due to the extra mass.
TheAugmented Target Docking Adapter, to be used for theGemini 9A crewed mission, was successfully placed into orbit by anAtlas SLV-3 in June 1966. But when the Gemini crew rendezvoused with it, they discovered the fairing had failed to open and separate, making docking impossible. Two lanyards, which should have been removed before flight, were still in place. The cause was determined to be a launch crew error.
In the 90's issues with payload fairing had caused numerous failures of theLong March 2E launch vehicle.[8]
In 1999, the launch of theIKONOS-1 Earth observation satellite failed after the payload fairing of theAthena II rocket did not open properly, preventing the satellite from reaching orbit.[9]
On February 24, 2009,NASA'sOrbiting Carbon Observatory satellite failed to reach orbit after liftoff; the agency concluded that the fairing on theTaurus XL launch vehicle failed to separate, causing the vehicle to retain too much mass and subsequently fall back to Earth and land in the Indian Ocean near Antarctica.[10][11]
The same happened to theNaro-1,South Korea's first carrier rocket, launched onAugust 25, 2009. During the launch, half of the payload's fairing failed to separate, and as a result, the rocket was thrown off course. The satellite did not reach a stable orbit.[12]
On March 4, 2011,NASA'sGlory satellite launch failed to reach orbit after liftoff due to a fairing separation failure on theOrbital SciencesTaurus XL launch vehicle, ending up in the Indian Ocean.[13] This failure represented the second consecutive failure of a fairing on an Orbital Sciences Taurus XL vehicle.[14] NASA subsequently decided to switch the launch vehicle for the Orbiting Carbon Observatory's replacement,OCO-2, from a Taurus to aDelta II rocket.[15]
On August 31, 2017,ISRO'sIRNSS-1H satellite failed to deploy after the payload fairing of the rocket PSLV-C39 failed to separate. As a result of extra mass, the rocket could not reach the desired orbit despite each stage's performance being nominal. The payload separated internally, but got stuck within the heat shield ( alternative name for the fairing ).[16][17]
A Hyperbola-1 rocket failed on August 3, 2021. A day after launching, iSpace revealed that the payload fairing had failed to separate properly, resulting in the single satellite being unable to reach its intended orbit.[18]
On February 10, 2022 Astra 3.3 launch failed. It is suspected that a fairing separation failure is to blame.[19]
 |
_payload_fairing.JPG)
