 | This article has multiple issues. Please helpimprove it or discuss these issues on thetalk page.(Learn how and when to remove these messages) (Learn how and when to remove this message)
|
Anomnidirectional treadmill (ODT) is a mechanical device, similar to a typical treadmill, that allows a person to perform locomotive motion in any direction, allowing for 360 degrees of movement. The ability to move in any direction is how thesetreadmills differ from their basic counterparts (that permit only unidirectionallocomotion).[1]
Omnidirectional treadmills are employed inimmersivevirtual environment implementations to allow unencumbered movement within the virtual space.[2]
Advantages to pairing an ODT with an immersive virtual environment include:
Natural navigation employing the ODT has two fundamental, parallel paths. One path seeks to create wholly immersive, obstruction free environments as invirtual reality, while the other seeks a lower cost, more restricted device. The immersive vision is that of a large active surface upon which the user is able to walk freely and unfettered. The second approach employs a harness for tracking, and optionally provides whole-body force feedback.
Both approaches have their advantages and disadvantages. Without a harness, the ODT user is able to accelerate away from center of the surface. The system must recognize this using a variety of sensing means, and gently accelerate the user back towards the center. Keeping the forces that return the user to center below the human sensing threshold is the main challenge with these systems. The larger the active surface, the easier it is to control using this means.
Additional routes are available, for example employing the mechanisms of two standard treadmills, one for the X and one for the Y axis. In such a setup, the mechanism for one axis would lay within the other, the belts typically being replaced with something akin to a wire ladder, and studs being used on footwear.
With a harness, the user is kept on center mechanically, and the surface area can be made much smaller. But actions such as rolling are not possible. On the plus side, a harness can provide body forces such as inertia or slope display. In addition, the harness may provide lifting force to simulate free-body flight. And the well-defined user space makes interaction with outside haptic devices feasible.
Omnidirectional treadmills have the potential to also be used in film, such as in conjunction with a green screen. This type of application would allow limitless movement by the actors.[3]
| Concepts |
| ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Technologies |
| ||||||||||
| Peripherals | |||||||||||
| Companies | |||||||||||
| Devices |
| ||||||||||
| Software |
| ||||||||||
